[Sat Jan 28 22:09:28 2012] Detection parameters:
  Position = (739.1, 977.0) = 22 33 20.63 -53 36 21.3
  Extent = 1.4" x 0.7", rotation angle = 49 degrees
  Source counts = 80.7 +/- 9.1
  Background counts = 2.3
  Rate = 0.005 +/- 0.0005

[Sat Jan 28 22:09:28 2012] Off-axis axis estimate = 6.53'
[Sat Jan 28 22:33:39 2012] Using EEF radius (= 1.91 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 22:33:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jan 28 22:33:39 2012] Initial guess for spatial extent in simple fitting = 1.91"
[Sat Jan 28 22:33:39 2012] source mask rpix=3.9, npix_max = 76, mask sum = 64, frac = 0.833
[Sat Jan 28 22:33:39 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 1.91"
[Sat Jan 28 22:48:34 2012] fullrun_ccd3_acisf13504_pi14-548_cl_pass0_src1.ximg exists
[Sat Jan 28 22:48:34 2012] fullrun_ccd3_acisf13504_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Jan 28 22:48:34 2012] Fit fullrun_ccd3_acisf13504_pi14-548_cl_pass0_src1 appears to have run properly
[Sat Jan 28 22:48:34 2012] fullrun_ccd3_acisf13504_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Jan 28 22:48:34 2012] fullrun_ccd3_acisf13504_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jan 28 22:48:34 2012] Fit fullrun_ccd3_acisf13504_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jan 28 23:33:33 2012] Spatial fit model total counts = 86.254400, observed total counts = 87.000000
[Sat Jan 28 23:33:33 2012] Offset between fit and detection position for source 1 = 1.018589 pixels
[Sat Jan 28 23:33:33 2012] 86.244100 total counts/ 10.076100 bgd. counts: snr = 23.995307
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.018589 pixels
  Position = (739.8, 977.8) = 22 33 20.62 -53 36 21.2
  Extent = 1.5" x 0.8", rotation angle = 320
  Source counts = 76.2 +/- 9.3
  Background counts = 10.1
  Rate = 0.004 +/- 0.0005
[Sat Jan 28 23:33:33 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 23:33:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 23:33:33 2012] Assessing source extent using major
[Sat Jan 28 23:33:33 2012] Source does appear to be extended
[Sat Jan 28 23:33:33 2012] Computing asymmetry using major and minor axis, asym = 1.77
[Sat Jan 28 23:33:33 2012] Source is asymmetric
[Sat Jan 28 23:57:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jan 28 23:57:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jan 28 23:57:09 2012] Initial guess for spatial extent in simple fitting = 1.17"
[Sat Jan 28 23:57:09 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.082
[Sat Jan 28 23:57:09 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 1.17"
[Sun Jan 29 00:07:17 2012] fullrun_ccd3_acisf13504_pi14-548_cl_pass1_src1.ximg exists
[Sun Jan 29 00:07:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13504_pi14-548_cl_pass1_src1.csv
[Sun Jan 29 00:07:17 2012] fullrun_ccd3_acisf13504_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Jan 29 00:07:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13504_pi14-548_cl_pass1_src1.csv
[Sun Jan 29 00:07:17 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13504_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13504_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan 29 00:07:17 2012] fullrun_ccd3_acisf13504_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Jan 29 00:07:17 2012] fullrun_ccd3_acisf13504_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jan 29 00:07:17 2012] Fit fullrun_ccd3_acisf13504_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jan 29 00:39:05 2012] Spatial fit model total counts = 82.999500, observed total counts = 83.000000
[Sun Jan 29 00:39:05 2012] Offset between fit and detection position for source 1 = 0.422974 pixels
[Sun Jan 29 00:39:05 2012] 83.654900 total counts/ 13.744900 bgd. counts: snr = 18.856822
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.422974 pixels
  Position = (739.4, 977.5) = 22 33 20.64 -53 36 21.3
  Extent = 1.2 (0.9-1.3)", rotation angle = 0
  Source counts = 69.9 +/- 9.1
  Background counts = 13.7
  Rate = 0.004 +/- 0.0005
[Sun Jan 29 00:39:05 2012] Vigneting correction estimate = 1.000000
[Sun Jan 29 00:39:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan 29 00:39:05 2012] Assessing source extent using major axis lower bound
[Sun Jan 29 00:39:05 2012] Source does appear to be extended
[Sun Jan 29 00:39:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 29 00:52:22 2012] Writing source region out to fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src1_src.reg
[Sun Jan 29 00:52:22 2012] Extracting stamp from image fullrun_ccd3_acisf13504_pi14-548_cl_sm2.00.img.gz, (686, 924) - (793, 1031)
[Sun Jan 29 00:52:22 2012] Writing fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src1.gif
[Sun Jan 29 00:52:24 2012] Size of ../../acisf13504/products/events/fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src1_src.evt.gz[events] = 80 counts
[Sun Jan 29 00:52:24 2012] Mean chipx,y = (716.73, 232.46)
[Sun Jan 29 00:52:24 2012] Mean tdetx,y = (4899.54, 3777.72)
[Sun Jan 29 00:52:24 2012] chipx,y range = (697.00-740.00, 211.00-252.00)
[Sun Jan 29 00:52:24 2012] Size of ../../acisf13504/products/events/fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 14 counts
[Sun Jan 29 00:52:25 2012] Not generating rmf since there are only 69 counts
[Sun Jan 29 00:52:25 2012] arf not found, will run specextract
[Sun Jan 29 00:52:46 2012] ../../acisf13504/products/spectra/fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src1.warf not found
[Sun Jan 29 00:52:46 2012] ../../acisf13504/products/spectra/fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src1.wrmf not found
[Sun Jan 29 00:52:46 2012] Removal of ../../acisf13504/products/spectra/fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src1.soff failed
[Sun Jan 29 01:02:01 2012] Spectrum 1 has only 70 counts, deleting rmf
[Sun Jan 29 01:02:01 2012] 181.637
[Sun Jan 29 01:03:30 2012] Updating aperture counts using extracted products
[Sun Jan 29 01:03:30 2012] Error reading totcts from fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Jan 29 01:03:30 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 01:03:30 2012] Using photon index=1.80, rate=0.0041, arf fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src1.arf
[Sun Jan 29 01:03:30 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Jan 29 01:03:30 2012] Updating source flux to 5.5e-14
[Sun Jan 29 01:03:36 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jan 29 01:03:37 2012] acisf13504/analysis//spectral/fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete