[Wed Feb 15 23:56:48 2012] Detection parameters:
  Position = (380.9, 901.0) = 22 33 4.21 -59 57 41.0
  Extent = 1.9" x 1.3", rotation angle = 55 degrees
  Source counts = 242.2 +/- 15.9
  Background counts = 10.8
  Rate = 0.008 +/- 0.0005

[Wed Feb 15 23:56:49 2012] Off-axis axis estimate = 7.30'
[Thu Feb 16 00:32:53 2012] Using EEF radius (= 2.36 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 00:32:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 16 00:32:53 2012] Initial guess for spatial extent in simple fitting = 2.36"
[Thu Feb 16 00:32:53 2012] source mask rpix=4.8, npix_max = 112, mask sum = 100, frac = 0.890
[Thu Feb 16 00:32:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 2.36"
[Thu Feb 16 00:50:17 2012] fullrun_ccd3_acisf13502_pi14-548_cl_pass0_src1.ximg exists
[Thu Feb 16 00:50:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13502_pi14-548_cl_pass0_src1.csv
[Thu Feb 16 00:50:17 2012] fullrun_ccd3_acisf13502_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Feb 16 00:50:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13502_pi14-548_cl_pass0_src1.csv
[Thu Feb 16 00:50:17 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13502_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13502_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:50:17 2012] fullrun_ccd3_acisf13502_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Feb 16 00:50:17 2012] fullrun_ccd3_acisf13502_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Feb 16 00:50:17 2012] Fit fullrun_ccd3_acisf13502_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Feb 16 00:50:24 2012] Spatial fit model total counts = 260.000000, observed total counts = 260.000000
[Thu Feb 16 00:50:24 2012] Offset between fit and detection position for source 1 = 0.672283 pixels
[Thu Feb 16 00:50:24 2012] 260.714500 total counts/ 32.343500 bgd. counts: snr = 40.155723
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.672283 pixels
  Position = (381.3, 901.5) = 22 33 4.22 -59 57 40.9
  Extent = 1.8 (1.6-2.0)", rotation angle = 0
  Source counts = 228.4 +/- 16.1
  Background counts = 32.3
  Rate = 0.007 +/- 0.0005
[Thu Feb 16 00:50:24 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:50:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:50:24 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 00:50:24 2012] Source does appear to be extended
[Thu Feb 16 00:50:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 01:14:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 01:14:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 16 01:14:51 2012] Initial guess for spatial extent in simple fitting = 1.79"
[Thu Feb 16 01:14:51 2012] source mask rpix=3.6, npix_max = 68, mask sum = 72, frac = 1.053
[Thu Feb 16 01:14:51 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 1.79"
[Thu Feb 16 01:34:06 2012] fullrun_ccd3_acisf13502_pi14-548_cl_pass1_src1.ximg exists
[Thu Feb 16 01:34:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13502_pi14-548_cl_pass1_src1.csv
[Thu Feb 16 01:34:06 2012] fullrun_ccd3_acisf13502_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Feb 16 01:34:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13502_pi14-548_cl_pass1_src1.csv
[Thu Feb 16 01:34:06 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13502_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13502_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 01:34:07 2012] fullrun_ccd3_acisf13502_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Feb 16 01:34:07 2012] fullrun_ccd3_acisf13502_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Feb 16 01:34:07 2012] Fit fullrun_ccd3_acisf13502_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Feb 16 01:34:14 2012] Spatial fit model total counts = 255.998000, observed total counts = 256.000000
[Thu Feb 16 01:34:14 2012] Offset between fit and detection position for source 1 = 0.017341 pixels
[Thu Feb 16 01:34:14 2012] 256.810100 total counts/ 53.685100 bgd. counts: snr = 27.722762
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.017341 pixels
  Position = (381.3, 901.5) = 22 33 4.22 -59 57 40.9
  Extent = 1.5 (1.3-1.8)", rotation angle = 0
  Source counts = 203.1 +/- 16.0
  Background counts = 53.7
  Rate = 0.006 +/- 0.0005
[Thu Feb 16 01:34:14 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 01:34:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 01:34:14 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 01:34:14 2012] Source does appear to be extended
[Thu Feb 16 01:34:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 01:48:42 2012] Writing source region out to fullrun_ccd3_acisf13502_pi14-548_pass1_cl_src1_src.reg
[Thu Feb 16 01:48:42 2012] Extracting stamp from image fullrun_ccd3_acisf13502_pi14-548_cl_sm2.00.img.gz, (311, 831) - (452, 972)
[Thu Feb 16 01:48:42 2012] Writing fullrun_ccd3_acisf13502_pi14-548_pass1_cl_src1.gif
[Thu Feb 16 01:48:44 2012] Size of ../../acisf13502/products/events/fullrun_ccd3_acisf13502_pi14-548_pass1_cl_src1_src.evt.gz[events] = 241 counts
[Thu Feb 16 01:48:44 2012] Mean chipx,y = (332.37, 179.54)
[Thu Feb 16 01:48:44 2012] Mean tdetx,y = (4952.46, 3393.37)
[Thu Feb 16 01:48:44 2012] chipx,y range = (312.00-357.00, 156.00-205.00)
[Thu Feb 16 01:48:44 2012] Size of ../../acisf13502/products/events/fullrun_ccd3_acisf13502_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 31 counts
[Thu Feb 16 01:48:46 2012] rmf not found, will run specextract
[Thu Feb 16 01:48:46 2012] arf not found, will run specextract
[Thu Feb 16 01:49:05 2012] ../../acisf13502/products/spectra/fullrun_ccd3_acisf13502_pi14-548_pass1_cl_src1.warf not found
[Thu Feb 16 01:49:05 2012] ../../acisf13502/products/spectra/fullrun_ccd3_acisf13502_pi14-548_pass1_cl_src1.wrmf not found
[Thu Feb 16 01:49:05 2012] Removal of ../../acisf13502/products/spectra/fullrun_ccd3_acisf13502_pi14-548_pass1_cl_src1.soff failed
[Thu Feb 16 02:03:55 2012] Keeping rmf generated by specextract
[Thu Feb 16 02:03:55 2012] 173.898
[Thu Feb 16 02:03:59 2012] Updating aperture counts using extracted products
[Thu Feb 16 02:03:59 2012] Error reading totcts from fullrun_ccd3_acisf13502_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Feb 16 02:03:59 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 02:03:59 2012] Using photon index=1.80, rate=0.00638, arf fullrun_ccd3_acisf13502_pi14-548_pass1_cl_src1.arf
[Thu Feb 16 02:03:59 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Feb 16 02:03:59 2012] Updating source flux to 9.1e-14
[Thu Feb 16 02:04:07 2012] Reading fit data from acisf13502/analysis//spectral/fullrun_ccd3_acisf13502_pi14-548_pass1_cl_src1_pl.csv
[Thu Feb 16 02:04:07 2012] Spectral fit parameter nH value = 4.01067e+20
[Thu Feb 16 02:04:07 2012] Spectral fit parameter PhoIndex value = 2.06811
[Thu Feb 16 02:04:07 2012] Failed to get F(0.3-8.0) from acisf13502/analysis//spectral/fullrun_ccd3_acisf13502_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Feb 16 02:04:07 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 02:04:07 2012] Using Nh = 4e+20, photon index=2.07, rate=0.00638, arf fullrun_ccd3_acisf13502_pi14-548_pass1_cl_src1.arf
[Thu Feb 16 02:04:07 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Feb 16 02:04:07 2012] Updating source flux to 8.5e-14