[Wed May  1 14:51:14 2013] Detection parameters:
  Position = (549.9, 531.6) = 22 18 56.91 -45 18 25.7
  Extent = 0.8" x 0.5", rotation angle = 50 degrees
  Source counts = 14.2 +/- 4.0
  Background counts = 1.8
  Rate = 0.0004 +/- 0.0001

[Wed May  1 14:51:14 2013] Off-axis axis estimate = 3.78'
[Wed May  1 15:32:37 2013] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Wed May  1 15:32:37 2013] Initial guess for spatial extent in simple fitting = 0.77"
[Wed May  1 15:32:37 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.945
[Wed May  1 15:32:37 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 0.77"
[Wed May  1 15:49:24 2013] fullrun_ccd3_acisf13501_pi14-548_cl_pass0_src11.ximg exists
[Wed May  1 15:49:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13501_pi14-548_cl_pass0_src11.csv
[Wed May  1 15:49:24 2013] fullrun_ccd3_acisf13501_pi14-548_cl_pass0_src11_1.ximg exists
[Wed May  1 15:49:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13501_pi14-548_cl_pass0_src11.csv
[Wed May  1 15:49:24 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13501_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13501_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 15:49:24 2013] fullrun_ccd3_acisf13501_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Wed May  1 15:49:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13501_pi14-548_cl_pass0_tfrozen_src11.csv
[Wed May  1 15:49:24 2013] fullrun_ccd3_acisf13501_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Wed May  1 15:49:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13501_pi14-548_cl_pass0_tfrozen_src11.csv
[Wed May  1 15:49:24 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13501_pi14-548_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13501_pi14-548_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 16:13:35 2013] Spatial fit model total counts = 10.803700, observed total counts = 22.000000
[Wed May  1 16:13:35 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  1 16:13:35 2013] Vigneting correction estimate = 1.000000
[Wed May  1 16:13:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 16:13:35 2013] Assessing source extent using major
[Wed May  1 16:13:35 2013] Source does appear to be extended
[Wed May  1 16:13:35 2013] Computing asymmetry using major and minor axis, asym = 1.55
[Wed May  1 16:13:35 2013] Source is asymmetric
[Wed May  1 16:49:50 2013] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Wed May  1 16:49:50 2013] Initial guess for spatial extent in simple fitting = 0.77"
[Wed May  1 16:49:50 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.945
[Wed May  1 16:49:50 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 0.77"
[Wed May  1 17:03:44 2013] fullrun_ccd3_acisf13501_pi14-548_cl_pass1_src11.ximg exists
[Wed May  1 17:03:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13501_pi14-548_cl_pass1_src11.csv
[Wed May  1 17:03:44 2013] fullrun_ccd3_acisf13501_pi14-548_cl_pass1_src11_1.ximg exists
[Wed May  1 17:03:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13501_pi14-548_cl_pass1_src11.csv
[Wed May  1 17:03:44 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13501_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13501_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 17:03:44 2013] fullrun_ccd3_acisf13501_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Wed May  1 17:03:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13501_pi14-548_cl_pass1_tfrozen_src11.csv
[Wed May  1 17:03:44 2013] fullrun_ccd3_acisf13501_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Wed May  1 17:03:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13501_pi14-548_cl_pass1_tfrozen_src11.csv
[Wed May  1 17:03:44 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13501_pi14-548_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13501_pi14-548_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 17:26:51 2013] Spatial fit model total counts = 10.803700, observed total counts = 22.000000
[Wed May  1 17:26:51 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  1 17:26:51 2013] Vigneting correction estimate = 1.000000
[Wed May  1 17:26:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 17:26:51 2013] Assessing source extent using major
[Wed May  1 17:26:51 2013] Source does appear to be extended
[Wed May  1 17:26:51 2013] Computing asymmetry using major and minor axis, asym = 1.55
[Wed May  1 17:26:51 2013] Source is asymmetric
[Wed May  1 17:47:20 2013] Writing source region out to fullrun_ccd3_acisf13501_pi14-548_pass1_cl_src6_src.reg
[Wed May  1 17:47:20 2013] Extracting stamp from image fullrun_ccd3_acisf13501_pi14-548_cl_sm2.00.img.gz, (515, 497) - (585, 566)
[Wed May  1 17:47:20 2013] Writing fullrun_ccd3_acisf13501_pi14-548_pass1_cl_src6.gif
[Wed May  1 17:53:21 2013] Size of ../../acisf13501/products/events/fullrun_ccd3_acisf13501_pi14-548_pass1_cl_src6_src.evt.gz[events] = 17 counts
[Wed May  1 17:53:21 2013] Mean chipx,y = (566.12, 562.76)
[Wed May  1 17:53:21 2013] Mean tdetx,y = (4569.24, 3627.12)
[Wed May  1 17:53:21 2013] chipx,y range = (551.00-588.00, 549.00-578.00)
[Wed May  1 17:53:21 2013] Size of ../../acisf13501/products/events/fullrun_ccd3_acisf13501_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 37 counts
[Wed May  1 17:53:22 2013] Not generating rmf since there are only 14 counts
[Wed May  1 17:53:22 2013] arf not found, will run specextract
[Wed May  1 17:53:48 2013] ../../acisf13501/products/spectra/fullrun_ccd3_acisf13501_pi14-548_pass1_cl_src6.warf not found
[Wed May  1 17:53:48 2013] ../../acisf13501/products/spectra/fullrun_ccd3_acisf13501_pi14-548_pass1_cl_src6.wrmf not found
[Wed May  1 17:53:48 2013] Removal of ../../acisf13501/products/spectra/fullrun_ccd3_acisf13501_pi14-548_pass1_cl_src6.soff failed
[Wed May  1 18:03:46 2013] Spectrum 6 has only 14 counts, deleting rmf
[Wed May  1 18:03:46 2013] 193.197
[Wed May  1 18:06:40 2013] Updating aperture counts using extracted products
[Wed May  1 18:06:40 2013] Total counts from fullrun_ccd3_acisf13501_pi14-548_pass1_cl_src6_src.pi.gz = 17.00
[Wed May  1 18:06:40 2013] Total counts from fullrun_ccd3_acisf13501_pi14-548_pass1_cl_src6_bgd.pi.gz = 37.00
[Wed May  1 18:06:40 2013] Got source and background scale factors 0.000001, 0.000021
[Wed May  1 18:06:40 2013] User source parameters:
  Position = (549.9, 531.6) = 22 18 56.91 -45 18 25.7
  Extent = 0.8" x 0.5", rotation angle = 50
  Source aperture counts = 15.0 +/- 5.2
  Background aperture counts = 2.0
  Rate = 0.0004 +/- 0.0001

[Wed May  1 18:06:40 2013] Updating counts from extracted products
[Wed May  1 18:06:40 2013] Set source signif. to 14.98/1.42 = 10.53
[Wed May  1 18:06:43 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 18:06:43 2013] Using photon index=1.80, rate=0.00043, arf fullrun_ccd3_acisf13501_pi14-548_pass1_cl_src6.arf
[Wed May  1 18:06:43 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  1 18:06:43 2013] Updating source flux to 5.4e-15
[Wed May  1 18:06:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting