[Wed May  1 14:50:44 2013] Detection parameters:
  Position = (473.5, 585.2) = 22 19 48.15 -45 19 31.2
  Extent = 0.5" x 0.5", rotation angle = 33 degrees
  Source counts = 42.0 +/- 6.6
  Background counts = 1.0
  Rate = 0.001 +/- 0.0002

[Wed May  1 14:50:45 2013] Off-axis axis estimate = 5.40'
[Wed May  1 15:18:51 2013] Using EEF radius (= 1.35 ")to estimate initial spatial extent for simple fitting
[Wed May  1 15:18:51 2013] Initial guess for spatial extent in simple fitting = 1.35"
[Wed May  1 15:18:51 2013] source mask rpix=2.7, npix_max = 41, mask sum = 27, frac = 0.643
[Wed May  1 15:18:51 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 1.35"
[Wed May  1 15:32:37 2013] fullrun_ccd2_acisf13501_pi14-548_cl_pass0_src6.ximg exists
[Wed May  1 15:32:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13501_pi14-548_cl_pass0_src6.csv
[Wed May  1 15:32:37 2013] fullrun_ccd2_acisf13501_pi14-548_cl_pass0_src6_1.ximg exists
[Wed May  1 15:32:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13501_pi14-548_cl_pass0_src6.csv
[Wed May  1 15:32:37 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13501_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13501_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 15:32:37 2013] fullrun_ccd2_acisf13501_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Wed May  1 15:32:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13501_pi14-548_cl_pass0_tfrozen_src6.csv
[Wed May  1 15:32:37 2013] fullrun_ccd2_acisf13501_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Wed May  1 15:32:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13501_pi14-548_cl_pass0_tfrozen_src6.csv
[Wed May  1 15:32:37 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13501_pi14-548_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13501_pi14-548_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 16:13:33 2013] Spatial fit model total counts = 64.475100, observed total counts = 73.000000
[Wed May  1 16:13:33 2013] Offset between fit and detection position for source 3 = 1.092160 pixels
[Wed May  1 16:13:33 2013] 62.371300 total counts/ 0.000000 bgd. counts: snr = 2961959501337099.500000
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.092160 pixels
  Position = (474.5, 585.6) = 22 19 48.12 -45 19 31.3
  Extent = 1.1 (1.0-1.3)", rotation angle = 0
  Source counts = 62.4 +/- 7.9
  Background counts = 0.0
  Rate = 0.002 +/- 0.0002
[Wed May  1 16:13:33 2013] Vigneting correction estimate = 1.000000
[Wed May  1 16:13:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 16:13:33 2013] Assessing source extent using major axis lower bound
[Wed May  1 16:13:33 2013] Source does appear to be extended
[Wed May  1 16:13:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 16:38:18 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  1 16:38:18 2013] Initial guess for spatial extent in simple fitting = 1.11"
[Wed May  1 16:38:18 2013] source mask rpix=2.3, npix_max = 30, mask sum = 15, frac = 0.495
[Wed May  1 16:38:18 2013] Skipping simple spatial due to low active detector fraction
[Wed May  1 17:26:49 2013] Vigneting correction estimate = 1.000000
[Wed May  1 17:26:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 17:26:49 2013] Assessing source extent using major axis lower bound
[Wed May  1 17:26:49 2013] Source does appear to be extended
[Wed May  1 17:26:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 17:35:53 2013] Writing source region out to fullrun_ccd2_acisf13501_pi14-548_pass1_cl_src3_src.reg
[Wed May  1 17:35:53 2013] Extracting stamp from image fullrun_ccd2_acisf13501_pi14-548_cl_sm2.00.img.gz, (424, 535) - (525, 636)
[Wed May  1 17:35:53 2013] Writing fullrun_ccd2_acisf13501_pi14-548_pass1_cl_src3.gif
[Wed May  1 17:38:54 2013] Size of ../../acisf13501/products/events/fullrun_ccd2_acisf13501_pi14-548_pass1_cl_src3_src.evt.gz[events] = 72 counts
[Wed May  1 17:38:54 2013] Mean chipx,y = (518.04, 395.33)
[Wed May  1 17:38:54 2013] Mean tdetx,y = (3456.33, 3567.96)
[Wed May  1 17:38:54 2013] chipx,y range = (497.00-533.00, 376.00-415.00)
[Wed May  1 17:38:54 2013] Size of ../../acisf13501/products/events/fullrun_ccd2_acisf13501_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 22 counts
[Wed May  1 17:38:55 2013] Not generating rmf since there are only 62 counts
[Wed May  1 17:38:55 2013] arf not found, will run specextract
[Wed May  1 17:39:20 2013] ../../acisf13501/products/spectra/fullrun_ccd2_acisf13501_pi14-548_pass1_cl_src3.warf not found
[Wed May  1 17:39:20 2013] ../../acisf13501/products/spectra/fullrun_ccd2_acisf13501_pi14-548_pass1_cl_src3.wrmf not found
[Wed May  1 17:39:20 2013] Removal of ../../acisf13501/products/spectra/fullrun_ccd2_acisf13501_pi14-548_pass1_cl_src3.soff failed
[Wed May  1 17:47:20 2013] Spectrum 3 has only 62 counts, deleting rmf
[Wed May  1 17:47:20 2013] 168.81
[Wed May  1 18:06:37 2013] Updating aperture counts using extracted products
[Wed May  1 18:06:37 2013] Total counts from fullrun_ccd2_acisf13501_pi14-548_pass1_cl_src3_src.pi.gz = 72.00
[Wed May  1 18:06:37 2013] Total counts from fullrun_ccd2_acisf13501_pi14-548_pass1_cl_src3_bgd.pi.gz = 22.00
[Wed May  1 18:06:37 2013] Got source and background scale factors 0.000004, 0.000045
[Wed May  1 18:06:37 2013] User source parameters:
  Position = (474.5, 585.6) = 22 19 48.12 -45 19 31.3
  Extent = 1.1 (1.0-1.3)", rotation angle = 0
  Source aperture counts = 70.1 +/- 9.5
  Background aperture counts = 1.9
  Rate = 0.002 +/- 0.0003

[Wed May  1 18:06:39 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 18:06:39 2013] Using photon index=1.80, rate=0.00179, arf fullrun_ccd2_acisf13501_pi14-548_pass1_cl_src3.arf
[Wed May  1 18:06:39 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  1 18:06:39 2013] Updating source flux to 2.6e-14
[Wed May  1 18:06:50 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting