[Fri May 24 08:30:47 2013] Detection parameters:
  Position = (146.4, 898.5) = 22 44 40.92 -62 13 13.3
  Extent = 0.8" x 0.5", rotation angle = 136 degrees
  Source counts = 10.5 +/- 3.3
  Background counts = 0.5
  Rate = 0.0004 +/- 0.0001

[Fri May 24 08:30:47 2013] Off-axis axis estimate = 4.35'
[Fri May 24 08:34:21 2013] Using EEF radius (= 0.94 ")to estimate initial spatial extent for simple fitting
[Fri May 24 08:34:21 2013] Initial guess for spatial extent in simple fitting = 0.94"
[Fri May 24 08:34:21 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.074
[Fri May 24 08:34:21 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 0.94"
[Fri May 24 08:43:59 2013] fullrun_ccd0_acisf13499_pi14-548_cl_pass0_src3.ximg exists
[Fri May 24 08:43:59 2013] fullrun_ccd0_acisf13499_pi14-548_cl_pass0_src3_1.ximg exists
[Fri May 24 08:43:59 2013] Fit fullrun_ccd0_acisf13499_pi14-548_cl_pass0_src3 appears to have run properly
[Fri May 24 08:43:59 2013] fullrun_ccd0_acisf13499_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri May 24 08:43:59 2013] fullrun_ccd0_acisf13499_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri May 24 08:43:59 2013] Fit fullrun_ccd0_acisf13499_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri May 24 09:45:11 2013] Spatial fit model total counts = 13.805700, observed total counts = 14.000000
[Fri May 24 09:45:11 2013] Offset between fit and detection position for source 3 = 0.508819 pixels
[Fri May 24 09:45:11 2013] 13.789800 total counts/ 0.000000 bgd. counts: snr = 93087456597919.593750
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.508819 pixels
  Position = (146.1, 898.9) = 22 44 40.98 -62 13 13.4
  Extent = 1.0 (0.8-1.2)", rotation angle = 0
  Source counts = 13.8 +/- 3.7
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Fri May 24 09:45:11 2013] Vigneting correction estimate = 1.000000
[Fri May 24 09:45:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 09:45:11 2013] Assessing source extent using major axis lower bound
[Fri May 24 09:45:11 2013] Source does appear to be extended
[Fri May 24 09:45:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 09:45:28 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 24 09:45:28 2013] Initial guess for spatial extent in simple fitting = 0.95"
[Fri May 24 09:45:28 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.049
[Fri May 24 09:45:28 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 0.95"
[Fri May 24 09:54:32 2013] fullrun_ccd0_acisf13499_pi14-548_cl_pass1_src3.ximg exists
[Fri May 24 09:54:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13499_pi14-548_cl_pass1_src3.csv
[Fri May 24 09:54:32 2013] fullrun_ccd0_acisf13499_pi14-548_cl_pass1_src3_1.ximg exists
[Fri May 24 09:54:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13499_pi14-548_cl_pass1_src3.csv
[Fri May 24 09:54:32 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13499_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13499_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 09:54:32 2013] fullrun_ccd0_acisf13499_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri May 24 09:54:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13499_pi14-548_cl_pass1_tfrozen_src3.csv
[Fri May 24 09:54:32 2013] fullrun_ccd0_acisf13499_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri May 24 09:54:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13499_pi14-548_cl_pass1_tfrozen_src3.csv
[Fri May 24 09:54:32 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13499_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13499_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 11:05:36 2013] Warning, spatial fit 3 centroid is now closest to src. 10
[Fri May 24 11:05:36 2013] Vigneting correction estimate = 1.000000
[Fri May 24 11:05:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 11:05:36 2013] Assessing source extent using major axis lower bound
[Fri May 24 11:05:36 2013] Source does appear to be extended
[Fri May 24 11:05:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 11:05:53 2013] Writing source region out to fullrun_ccd0_acisf13499_pi14-548_pass1_cl_src3_src.reg
[Fri May 24 11:05:53 2013] Extracting stamp from image fullrun_ccd0_acisf13499_pi14-548_cl_sm2.00.img.gz, (102, 855) - (190, 943)
[Fri May 24 11:05:53 2013] Writing fullrun_ccd0_acisf13499_pi14-548_pass1_cl_src3.gif
[Fri May 24 11:07:00 2013] Size of ../../acisf13499/products/events/fullrun_ccd0_acisf13499_pi14-548_pass1_cl_src3_src.evt.gz[events] = 13 counts
[Fri May 24 11:07:00 2013] Mean chipx,y = (996.54, 747.08)
[Fri May 24 11:07:00 2013] Mean tdetx,y = (3808.08, 4135.46)
[Fri May 24 11:07:00 2013] chipx,y range = (980.00-1019.00, 736.00-768.00)
[Fri May 24 11:07:00 2013] Size of ../../acisf13499/products/events/fullrun_ccd0_acisf13499_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 3 counts
[Fri May 24 11:07:01 2013] Not generating rmf since there are only 13 counts
[Fri May 24 11:07:01 2013] arf not found, will run specextract
[Fri May 24 11:07:25 2013] ../../acisf13499/products/spectra/fullrun_ccd0_acisf13499_pi14-548_pass1_cl_src3.warf not found
[Fri May 24 11:07:25 2013] ../../acisf13499/products/spectra/fullrun_ccd0_acisf13499_pi14-548_pass1_cl_src3.wrmf not found
[Fri May 24 11:07:25 2013] Removal of ../../acisf13499/products/spectra/fullrun_ccd0_acisf13499_pi14-548_pass1_cl_src3.soff failed
[Fri May 24 11:10:23 2013] Spectrum 3 has only 14 counts, deleting rmf
[Fri May 24 11:10:23 2013] 157.555
[Fri May 24 11:36:07 2013] Updating aperture counts using extracted products
[Fri May 24 11:36:07 2013] Total counts from fullrun_ccd0_acisf13499_pi14-548_pass1_cl_src3_src.pi.gz = 13.00
[Fri May 24 11:36:07 2013] Total counts from fullrun_ccd0_acisf13499_pi14-548_pass1_cl_src3_bgd.pi.gz = 3.00
[Fri May 24 11:36:07 2013] Got source and background scale factors 0.000003, 0.000033
[Fri May 24 11:36:07 2013] User source parameters:
  Position = (146.1, 898.9) = 22 44 40.98 -62 13 13.4
  Extent = 1.0 (0.8-1.2)", rotation angle = 0
  Source aperture counts = 12.7 +/- 4.7
  Background aperture counts = 0.3
  Rate = 0.0004 +/- 0.0002

[Fri May 24 11:36:08 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 24 11:36:08 2013] Using photon index=1.80, rate=0.000471, arf fullrun_ccd0_acisf13499_pi14-548_pass1_cl_src3.arf
[Fri May 24 11:36:08 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May 24 11:36:08 2013] Updating source flux to 7e-15
[Fri May 24 11:36:17 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 24 11:36:18 2013] acisf13499/analysis//spectral/fullrun_ccd0_acisf13499_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete