[Wed May  8 16:03:33 2013] Detection parameters:
  Position = (204.6, 473.4) = 22 23 14.45 -48 34 21.3
  Extent = 0.5" x 0.5", rotation angle = 16 degrees
  Source counts = 15.5 +/- 4.0
  Background counts = 0.5
  Rate = 0.0005 +/- 0.0001

[Wed May  8 16:03:33 2013] Off-axis axis estimate = 5.33'
[Wed May  8 16:44:29 2013] Using EEF radius (= 1.32 ")to estimate initial spatial extent for simple fitting
[Wed May  8 16:44:29 2013] Initial guess for spatial extent in simple fitting = 1.32"
[Wed May  8 16:44:29 2013] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.210
[Wed May  8 16:44:29 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 1.32"
[Wed May  8 16:58:37 2013] fullrun_ccd3_acisf13497_pi14-548_cl_pass0_src10.ximg exists
[Wed May  8 16:58:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13497_pi14-548_cl_pass0_src10.csv
[Wed May  8 16:58:37 2013] fullrun_ccd3_acisf13497_pi14-548_cl_pass0_src10_1.ximg exists
[Wed May  8 16:58:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13497_pi14-548_cl_pass0_src10.csv
[Wed May  8 16:58:37 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13497_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13497_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 16:58:37 2013] fullrun_ccd3_acisf13497_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Wed May  8 16:58:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13497_pi14-548_cl_pass0_tfrozen_src10.csv
[Wed May  8 16:58:37 2013] fullrun_ccd3_acisf13497_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Wed May  8 16:58:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13497_pi14-548_cl_pass0_tfrozen_src10.csv
[Wed May  8 16:58:37 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13497_pi14-548_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13497_pi14-548_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 17:10:03 2013] Spatial fit model total counts = 14.078600, observed total counts = 23.000000
[Wed May  8 17:10:03 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  8 17:10:03 2013] Vigneting correction estimate = 1.000000
[Wed May  8 17:10:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 17:10:03 2013] Assessing source extent using major
[Wed May  8 17:10:03 2013] Source does appear to be extended
[Wed May  8 17:10:03 2013] Computing asymmetry using major and minor axis, asym = 1.10
[Wed May  8 17:48:12 2013] Using EEF radius (= 1.32 ")to estimate initial spatial extent for simple fitting
[Wed May  8 17:48:12 2013] Initial guess for spatial extent in simple fitting = 1.32"
[Wed May  8 17:48:12 2013] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.210
[Wed May  8 17:48:12 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 1.32"
[Wed May  8 18:01:58 2013] fullrun_ccd3_acisf13497_pi14-548_cl_pass1_src10.ximg exists
[Wed May  8 18:01:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13497_pi14-548_cl_pass1_src10.csv
[Wed May  8 18:01:58 2013] fullrun_ccd3_acisf13497_pi14-548_cl_pass1_src10_1.ximg exists
[Wed May  8 18:01:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13497_pi14-548_cl_pass1_src10.csv
[Wed May  8 18:01:58 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13497_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13497_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 18:01:58 2013] fullrun_ccd3_acisf13497_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Wed May  8 18:01:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13497_pi14-548_cl_pass1_tfrozen_src10.csv
[Wed May  8 18:01:58 2013] fullrun_ccd3_acisf13497_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Wed May  8 18:01:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13497_pi14-548_cl_pass1_tfrozen_src10.csv
[Wed May  8 18:01:58 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13497_pi14-548_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13497_pi14-548_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 18:15:11 2013] Spatial fit model total counts = 14.078600, observed total counts = 23.000000
[Wed May  8 18:15:11 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  8 18:15:11 2013] Vigneting correction estimate = 1.000000
[Wed May  8 18:15:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 18:15:11 2013] Assessing source extent using major
[Wed May  8 18:15:11 2013] Source does appear to be extended
[Wed May  8 18:15:11 2013] Computing asymmetry using major and minor axis, asym = 1.10
[Wed May  8 18:38:18 2013] Writing source region out to fullrun_ccd3_acisf13497_pi14-548_pass1_cl_src10_src.reg
[Wed May  8 18:38:18 2013] Extracting stamp from image fullrun_ccd3_acisf13497_pi14-548_cl_sm2.00.img.gz, (180, 449) - (229, 498)
[Wed May  8 18:38:18 2013] Writing fullrun_ccd3_acisf13497_pi14-548_pass1_cl_src10.gif
[Wed May  8 18:43:51 2013] Size of ../../acisf13497/products/events/fullrun_ccd3_acisf13497_pi14-548_pass1_cl_src10_src.evt.gz[events] = 16 counts
[Wed May  8 18:43:51 2013] Mean chipx,y = (156.69, 568.44)
[Wed May  8 18:43:51 2013] Mean tdetx,y = (4563.56, 3217.69)
[Wed May  8 18:43:51 2013] chipx,y range = (137.00-174.00, 549.00-584.00)
[Wed May  8 18:43:51 2013] Size of ../../acisf13497/products/events/fullrun_ccd3_acisf13497_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 6 counts
[Wed May  8 18:43:52 2013] Not generating rmf since there are only 15 counts
[Wed May  8 18:43:52 2013] arf not found, will run specextract
[Wed May  8 18:44:22 2013] ../../acisf13497/products/spectra/fullrun_ccd3_acisf13497_pi14-548_pass1_cl_src10.warf not found
[Wed May  8 18:44:22 2013] ../../acisf13497/products/spectra/fullrun_ccd3_acisf13497_pi14-548_pass1_cl_src10.wrmf not found
[Wed May  8 18:44:22 2013] Removal of ../../acisf13497/products/spectra/fullrun_ccd3_acisf13497_pi14-548_pass1_cl_src10.soff failed
[Wed May  8 18:52:06 2013] Spectrum 10 has only 16 counts, deleting rmf
[Wed May  8 18:52:06 2013] 180.149
[Wed May  8 18:53:43 2013] Updating aperture counts using extracted products
[Wed May  8 18:53:43 2013] Total counts from fullrun_ccd3_acisf13497_pi14-548_pass1_cl_src10_src.pi.gz = 16.00
[Wed May  8 18:53:43 2013] Total counts from fullrun_ccd3_acisf13497_pi14-548_pass1_cl_src10_bgd.pi.gz = 6.00
[Wed May  8 18:53:43 2013] Got source and background scale factors 0.000001, 0.000011
[Wed May  8 18:53:43 2013] User source parameters:
  Position = (204.6, 473.4) = 22 23 14.45 -48 34 21.3
  Extent = 0.5" x 0.5", rotation angle = 16
  Source aperture counts = 15.5 +/- 5.1
  Background aperture counts = 0.5
  Rate = 0.0005 +/- 0.0002

[Wed May  8 18:53:43 2013] Updating counts from extracted products
[Wed May  8 18:53:43 2013] Set source signif. to 15.54/0.68 = 22.81
[Wed May  8 18:53:45 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 18:53:45 2013] Using photon index=1.80, rate=0.000479, arf fullrun_ccd3_acisf13497_pi14-548_pass1_cl_src10.arf
[Wed May  8 18:53:45 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  8 18:53:45 2013] Updating source flux to 6.6e-15
[Wed May  8 18:53:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May  8 18:53:57 2013] acisf13497/analysis//spectral/fullrun_ccd3_acisf13497_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete