[Sun May 12 08:39:02 2013] Detection parameters:
  Position = (418.7, 377.7) = 23 35 13.51 -45 53 34.1
  Extent = 1.1" x 0.7", rotation angle = 105 degrees
  Source counts = 15.5 +/- 4.1
  Background counts = 1.5
  Rate = 0.0008 +/- 0.0002

[Sun May 12 08:39:02 2013] Off-axis axis estimate = 6.12'
[Sun May 12 09:08:36 2013] Using EEF radius (= 1.69 ")to estimate initial spatial extent for simple fitting
[Sun May 12 09:08:36 2013] Initial guess for spatial extent in simple fitting = 1.69"
[Sun May 12 09:08:36 2013] source mask rpix=3.4, npix_max = 62, mask sum = 64, frac = 1.030
[Sun May 12 09:08:36 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 1.69"
[Sun May 12 09:15:33 2013] fullrun_ccd2_acisf13496_pi14-548_cl_pass0_src5.ximg exists
[Sun May 12 09:15:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13496_pi14-548_cl_pass0_src5.csv
[Sun May 12 09:15:33 2013] fullrun_ccd2_acisf13496_pi14-548_cl_pass0_src5_1.ximg exists
[Sun May 12 09:15:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13496_pi14-548_cl_pass0_src5.csv
[Sun May 12 09:15:33 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13496_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13496_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 09:15:33 2013] fullrun_ccd2_acisf13496_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sun May 12 09:15:33 2013] fullrun_ccd2_acisf13496_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sun May 12 09:15:33 2013] Fit fullrun_ccd2_acisf13496_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sun May 12 09:52:33 2013] Spatial fit model total counts = 20.099700, observed total counts = 23.000000
[Sun May 12 09:52:33 2013] Offset between fit and detection position for source 17 = 0.417490 pixels
[Sun May 12 09:52:33 2013] 20.344580 total counts/ 4.805580 bgd. counts: snr = 7.088432
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.417490 pixels
  Position = (419.1, 377.6) = 23 35 13.51 -45 53 34.4
  Extent = 1.7 (1.3-2.7)" x 0.6 (0.4-0.8)", rotation angle = 245 (231-258) degrees
  Source counts = 15.5 +/- 4.5
  Background counts = 4.8
  Rate = 0.0008 +/- 0.0002
[Sun May 12 09:52:33 2013] Vigneting correction estimate = 1.000000
[Sun May 12 09:52:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 09:52:33 2013] Assessing source extent using major axis lower bound
[Sun May 12 09:52:33 2013] Source does appear to be extended
[Sun May 12 09:52:33 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.53
[Sun May 12 09:52:33 2013] Source is asymmetric
[Sun May 12 10:21:31 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 10:21:31 2013] Initial guess for spatial extent in simple fitting = 1.13"
[Sun May 12 10:21:31 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.963
[Sun May 12 10:21:31 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 1.13"
[Sun May 12 10:28:34 2013] fullrun_ccd2_acisf13496_pi14-548_cl_pass1_src5.ximg exists
[Sun May 12 10:28:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13496_pi14-548_cl_pass1_src5.csv
[Sun May 12 10:28:34 2013] fullrun_ccd2_acisf13496_pi14-548_cl_pass1_src5_1.ximg exists
[Sun May 12 10:28:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13496_pi14-548_cl_pass1_src5.csv
[Sun May 12 10:28:34 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13496_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13496_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 10:28:34 2013] fullrun_ccd2_acisf13496_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sun May 12 10:28:34 2013] fullrun_ccd2_acisf13496_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sun May 12 10:28:34 2013] Fit fullrun_ccd2_acisf13496_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Sun May 12 11:05:24 2013] Spatial fit model total counts = 16.457800, observed total counts = 19.000000
[Sun May 12 11:05:24 2013] Offset between fit and detection position for source 17 = 0.301201 pixels
[Sun May 12 11:05:24 2013] 16.973670 total counts/ 2.521370 bgd. counts: snr = 9.101620
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.301201 pixels
  Position = (419.2, 377.3) = 23 35 13.51 -45 53 34.6
  Extent = 1.8 (1.1-2.3)" x 0.5 (0.3-0.9)", rotation angle = 65 (52-78) degrees
  Source counts = 14.5 +/- 4.1
  Background counts = 2.5
  Rate = 0.0007 +/- 0.0002
[Sun May 12 11:05:24 2013] Vigneting correction estimate = 1.000000
[Sun May 12 11:05:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 11:05:24 2013] Assessing source extent using major axis lower bound
[Sun May 12 11:05:24 2013] Source does appear to be extended
[Sun May 12 11:05:24 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.26
[Sun May 12 11:13:13 2013] Writing source region out to fullrun_ccd2_acisf13496_pi14-548_pass1_cl_src17_src.reg
[Sun May 12 11:13:13 2013] Extracting stamp from image fullrun_ccd2_acisf13496_pi14-548_cl_sm2.00.img.gz, (338, 296) - (501, 459)
[Sun May 12 11:13:13 2013] Writing fullrun_ccd2_acisf13496_pi14-548_pass1_cl_src17.gif
[Sun May 12 11:15:57 2013] Size of ../../acisf13496/products/events/fullrun_ccd2_acisf13496_pi14-548_pass1_cl_src17_src.evt.gz[events] = 17 counts
[Sun May 12 11:15:57 2013] Mean chipx,y = (680.41, 344.88)
[Sun May 12 11:15:57 2013] Mean tdetx,y = (3405.88, 3405.59)
[Sun May 12 11:15:57 2013] chipx,y range = (664.00-697.00, 328.00-364.00)
[Sun May 12 11:15:57 2013] Size of ../../acisf13496/products/events/fullrun_ccd2_acisf13496_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 31 counts
[Sun May 12 11:15:58 2013] Not generating rmf since there are only 14 counts
[Sun May 12 11:15:58 2013] arf not found, will run specextract
[Sun May 12 11:16:22 2013] ../../acisf13496/products/spectra/fullrun_ccd2_acisf13496_pi14-548_pass1_cl_src17.warf not found
[Sun May 12 11:16:22 2013] ../../acisf13496/products/spectra/fullrun_ccd2_acisf13496_pi14-548_pass1_cl_src17.wrmf not found
[Sun May 12 11:16:22 2013] Removal of ../../acisf13496/products/spectra/fullrun_ccd2_acisf13496_pi14-548_pass1_cl_src17.soff failed
[Sun May 12 11:23:36 2013] Spectrum 17 has only 14 counts, deleting rmf
[Sun May 12 11:23:37 2013] 169.961
[Sun May 12 11:42:38 2013] Updating aperture counts using extracted products
[Sun May 12 11:42:38 2013] Total counts from fullrun_ccd2_acisf13496_pi14-548_pass1_cl_src17_src.pi.gz = 17.00
[Sun May 12 11:42:38 2013] Total counts from fullrun_ccd2_acisf13496_pi14-548_pass1_cl_src17_bgd.pi.gz = 31.00
[Sun May 12 11:42:38 2013] Got source and background scale factors 0.000003, 0.000109
[Sun May 12 11:42:38 2013] User source parameters:
  Position = (419.2, 377.3) = 23 35 13.51 -45 53 34.6
  Extent = 1.8 (1.1-2.3)" x 0.5 (0.3-0.9)", rotation angle = 65 (52-78) degrees
  Source aperture counts = 16.2 +/- 5.2
  Background aperture counts = 0.8
  Rate = 0.0008 +/- 0.0003

[Sun May 12 11:42:39 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 11:42:39 2013] Using photon index=1.80, rate=0.000698, arf fullrun_ccd2_acisf13496_pi14-548_pass1_cl_src17.arf
[Sun May 12 11:42:39 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May 12 11:42:39 2013] Updating source flux to 1e-14
[Sun May 12 11:42:49 2013] Source 17 has fewer than 100.000000 counts, skipping spectral fitting