[Thu May 16 10:46:44 2013] Detection parameters:
  Position = (988.4, 318.4) = 0 37 2.12 -50 36 17.2
  Extent = 5.5" x 2.8", rotation angle = 145 degrees
  Source counts = 15.5 +/- 6.4
  Background counts = 25.5
  Rate = 0.0002 +/- 9e-05

[Thu May 16 10:46:44 2013] Off-axis axis estimate = 12.20'
[Thu May 16 13:28:26 2013] Using EEF radius (= 6.65 ")to estimate initial spatial extent for simple fitting
[Thu May 16 13:28:26 2013] Initial guess for spatial extent in simple fitting = 6.65"
[Thu May 16 13:28:26 2013] source mask rpix=13.5, npix_max = 785, mask sum = 751, frac = 0.956
[Thu May 16 13:28:26 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 6.65"
[Thu May 16 14:27:33 2013] fullrun_ccd6_acisf13493_pi14-548_cl_pass0_src5.ximg exists
[Thu May 16 14:27:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13493_pi14-548_cl_pass0_src5.csv
[Thu May 16 14:27:33 2013] fullrun_ccd6_acisf13493_pi14-548_cl_pass0_src5_1.ximg exists
[Thu May 16 14:27:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13493_pi14-548_cl_pass0_src5.csv
[Thu May 16 14:27:33 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf13493_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf13493_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 14:27:33 2013] fullrun_ccd6_acisf13493_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Thu May 16 14:27:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13493_pi14-548_cl_pass0_tfrozen_src5.csv
[Thu May 16 14:27:33 2013] fullrun_ccd6_acisf13493_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Thu May 16 14:27:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13493_pi14-548_cl_pass0_tfrozen_src5.csv
[Thu May 16 14:27:33 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf13493_pi14-548_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf13493_pi14-548_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 14:27:48 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 54.616541 pixels away
[Thu May 16 14:27:48 2013] Vigneting correction estimate = 1.000000
[Thu May 16 14:27:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 14:27:48 2013] Assessing source extent using major
[Thu May 16 14:27:48 2013] Source does appear to be extended
[Thu May 16 14:27:48 2013] Computing asymmetry using major and minor axis, asym = 1.96
[Thu May 16 14:27:48 2013] Source is asymmetric
[Thu May 16 14:27:48 2013] Deleting source due to low Poisson probability 1.0