[Thu May 16 10:46:06 2013] Detection parameters:
  Position = (995.9, 1110.4) = 0 37 21.74 -50 44 26.7
  Extent = 0.9" x 0.5", rotation angle = 90 degrees
  Source counts = 16.6 +/- 4.2
  Background counts = 1.4
  Rate = 0.0002 +/- 6e-05

[Thu May 16 10:46:07 2013] Off-axis axis estimate = 5.54'
[Thu May 16 12:46:19 2013] Using EEF radius (= 1.41 ")to estimate initial spatial extent for simple fitting
[Thu May 16 12:46:19 2013] Initial guess for spatial extent in simple fitting = 1.41"
[Thu May 16 12:46:19 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.928
[Thu May 16 12:46:19 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 1.41"
[Thu May 16 13:28:25 2013] fullrun_ccd3_acisf13493_pi14-548_cl_pass0_src25.ximg exists
[Thu May 16 13:28:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13493_pi14-548_cl_pass0_src25.csv
[Thu May 16 13:28:25 2013] fullrun_ccd3_acisf13493_pi14-548_cl_pass0_src25_1.ximg exists
[Thu May 16 13:28:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13493_pi14-548_cl_pass0_src25.csv
[Thu May 16 13:28:25 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13493_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13493_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 13:28:26 2013] fullrun_ccd3_acisf13493_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Thu May 16 13:28:26 2013] fullrun_ccd3_acisf13493_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Thu May 16 13:28:26 2013] Fit fullrun_ccd3_acisf13493_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Thu May 16 14:27:47 2013] Spatial fit model total counts = 17.727200, observed total counts = 21.000000
[Thu May 16 14:27:47 2013] Offset between fit and detection position for source 37 = 0.790306 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.790306 pixels
  Position = (996.4, 1111.1) = 0 37 21.74 -50 44 26.6
  Extent = 1.3 (0.9-1.9)" x 0.7 (0.5-1.0)", rotation angle = 90 (65-110) degrees
  Source counts = 18.0 +/- 4.2
  Background counts = 0.0
  Rate = 0.0002 +/- 6e-05
[Thu May 16 14:27:47 2013] Vigneting correction estimate = 1.000000
[Thu May 16 14:27:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 14:27:47 2013] Assessing source extent using major axis lower bound
[Thu May 16 14:27:47 2013] Source does appear to be extended
[Thu May 16 14:27:47 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.99
[Thu May 16 16:03:43 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 16 16:03:43 2013] Initial guess for spatial extent in simple fitting = 0.96"
[Thu May 16 16:03:43 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.044
[Thu May 16 16:03:43 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 0.96"
[Thu May 16 16:46:28 2013] fullrun_ccd3_acisf13493_pi14-548_cl_pass1_src25.ximg exists
[Thu May 16 16:46:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13493_pi14-548_cl_pass1_src25.csv
[Thu May 16 16:46:28 2013] fullrun_ccd3_acisf13493_pi14-548_cl_pass1_src25_1.ximg exists
[Thu May 16 16:46:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13493_pi14-548_cl_pass1_src25.csv
[Thu May 16 16:46:28 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13493_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13493_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 16:46:28 2013] fullrun_ccd3_acisf13493_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Thu May 16 16:46:28 2013] fullrun_ccd3_acisf13493_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Thu May 16 16:46:28 2013] Fit fullrun_ccd3_acisf13493_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Thu May 16 18:03:24 2013] Spatial fit model total counts = 16.363000, observed total counts = 20.000000
[Thu May 16 18:03:24 2013] Offset between fit and detection position for source 37 = 0.206368 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.206368 pixels
  Position = (996.3, 1110.9) = 0 37 21.75 -50 44 26.7
  Extent = 1.2 (0.9-1.9)" x 0.6 (0.4-1.0)", rotation angle = 87 (62-105) degrees
  Source counts = 17.1 +/- 4.1
  Background counts = 0.0
  Rate = 0.0002 +/- 6e-05
[Thu May 16 18:03:24 2013] Vigneting correction estimate = 1.000000
[Thu May 16 18:03:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 18:03:24 2013] Assessing source extent using major axis lower bound
[Thu May 16 18:03:24 2013] Source does appear to be extended
[Thu May 16 18:03:24 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.94
[Thu May 16 18:33:47 2013] Writing source region out to fullrun_ccd3_acisf13493_pi14-548_pass1_cl_src37_src.reg
[Thu May 16 18:33:47 2013] Extracting stamp from image fullrun_ccd3_acisf13493_pi14-548_cl_sm2.00.img.gz, (940, 1055) - (1052, 1167)
[Thu May 16 18:33:47 2013] Writing fullrun_ccd3_acisf13493_pi14-548_pass1_cl_src37.gif
[Thu May 16 18:47:33 2013] Size of ../../acisf13493/products/events/fullrun_ccd3_acisf13493_pi14-548_pass1_cl_src37_src.evt.gz[events] = 20 counts
[Thu May 16 18:47:33 2013] Mean chipx,y = (44.70, 677.40)
[Thu May 16 18:47:33 2013] Mean tdetx,y = (4454.60, 3105.70)
[Thu May 16 18:47:33 2013] chipx,y range = (33.00-64.00, 660.00-694.00)
[Thu May 16 18:47:33 2013] Size of ../../acisf13493/products/events/fullrun_ccd3_acisf13493_pi14-548_pass1_cl_src37_bgd.evt.gz[events] = 41 counts
[Thu May 16 18:47:34 2013] Not generating rmf since there are only 17 counts
[Thu May 16 18:47:34 2013] arf not found, will run specextract
[Thu May 16 18:48:06 2013] ../../acisf13493/products/spectra/fullrun_ccd3_acisf13493_pi14-548_pass1_cl_src37.warf not found
[Thu May 16 18:48:06 2013] ../../acisf13493/products/spectra/fullrun_ccd3_acisf13493_pi14-548_pass1_cl_src37.wrmf not found
[Thu May 16 18:48:06 2013] Removal of ../../acisf13493/products/spectra/fullrun_ccd3_acisf13493_pi14-548_pass1_cl_src37.soff failed
[Thu May 16 18:59:21 2013] Spectrum 37 has only 17 counts, deleting rmf
[Thu May 16 18:59:21 2013] 177.706
[Thu May 16 19:03:02 2013] Updating aperture counts using extracted products
[Thu May 16 19:03:02 2013] Total counts from fullrun_ccd3_acisf13493_pi14-548_pass1_cl_src37_src.pi.gz = 20.00
[Thu May 16 19:03:02 2013] Total counts from fullrun_ccd3_acisf13493_pi14-548_pass1_cl_src37_bgd.pi.gz = 41.00
[Thu May 16 19:03:02 2013] Got source and background scale factors 0.000002, 0.000054
[Thu May 16 19:03:02 2013] User source parameters:
  Position = (996.3, 1110.9) = 0 37 21.75 -50 44 26.7
  Extent = 1.2 (0.9-1.9)" x 0.6 (0.4-1.0)", rotation angle = 87 (62-105) degrees
  Source aperture counts = 18.3 +/- 5.6
  Background aperture counts = 1.7
  Rate = 0.0003 +/- 8e-05

[Thu May 16 19:03:05 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 16 19:03:05 2013] Using photon index=1.80, rate=0.000234, arf fullrun_ccd3_acisf13493_pi14-548_pass1_cl_src37.arf
[Thu May 16 19:03:05 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May 16 19:03:05 2013] Updating source flux to 3.3e-15
[Thu May 16 19:03:34 2013] Source 37 has fewer than 100.000000 counts, skipping spectral fitting