[Sat May 11 08:04:30 2013] Detection parameters:
  Position = (529.3, 567.4) = 3 10 39.03 -46 46 18.6
  Extent = 0.5" x 0.5", rotation angle = 165 degrees
  Source counts = 13.4 +/- 3.7
  Background counts = 0.6
  Rate = 0.0004 +/- 0.0001

[Sat May 11 08:04:30 2013] Off-axis axis estimate = 3.56'
[Sat May 11 08:59:11 2013] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Sat May 11 08:59:11 2013] Initial guess for spatial extent in simple fitting = 0.71"
[Sat May 11 08:59:11 2013] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.067
[Sat May 11 08:59:11 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 0.71"
[Sat May 11 09:27:19 2013] fullrun_ccd3_acisf13492_pi14-548_cl_pass0_src18.ximg exists
[Sat May 11 09:27:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13492_pi14-548_cl_pass0_src18.csv
[Sat May 11 09:27:19 2013] fullrun_ccd3_acisf13492_pi14-548_cl_pass0_src18_1.ximg exists
[Sat May 11 09:27:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13492_pi14-548_cl_pass0_src18.csv
[Sat May 11 09:27:19 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13492_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13492_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 09:27:19 2013] fullrun_ccd3_acisf13492_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Sat May 11 09:27:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13492_pi14-548_cl_pass0_tfrozen_src18.csv
[Sat May 11 09:27:19 2013] fullrun_ccd3_acisf13492_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Sat May 11 09:27:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13492_pi14-548_cl_pass0_tfrozen_src18.csv
[Sat May 11 09:27:19 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13492_pi14-548_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13492_pi14-548_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 09:39:10 2013] Spatial fit model total counts = 13.216900, observed total counts = 15.000000
[Sat May 11 09:39:10 2013] Offset between fit and detection position for source 19 = 0.690985 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.690985 pixels
  Position = (529.7, 568.0) = 3 10 39.04 -46 46 18.5
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source counts = 13.4 +/- 3.7
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Sat May 11 09:39:10 2013] Vigneting correction estimate = 1.000000
[Sat May 11 09:39:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 09:39:10 2013] Assessing source extent using major axis lower bound
[Sat May 11 09:39:10 2013] Source does appear to be extended
[Sat May 11 09:39:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 10:33:19 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 11 10:33:19 2013] Initial guess for spatial extent in simple fitting = 0.58"
[Sat May 11 10:33:19 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.065
[Sat May 11 10:33:19 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 0.58"
[Sat May 11 11:00:43 2013] fullrun_ccd3_acisf13492_pi14-548_cl_pass1_src18.ximg exists
[Sat May 11 11:00:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13492_pi14-548_cl_pass1_src18.csv
[Sat May 11 11:00:43 2013] fullrun_ccd3_acisf13492_pi14-548_cl_pass1_src18_1.ximg exists
[Sat May 11 11:00:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13492_pi14-548_cl_pass1_src18.csv
[Sat May 11 11:00:43 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13492_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13492_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:00:43 2013] fullrun_ccd3_acisf13492_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Sat May 11 11:00:43 2013] fullrun_ccd3_acisf13492_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Sat May 11 11:00:43 2013] Fit fullrun_ccd3_acisf13492_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Sat May 11 11:13:14 2013] Spatial fit model total counts = 14.818600, observed total counts = 15.000000
[Sat May 11 11:13:14 2013] Offset between fit and detection position for source 19 = 0.016271 pixels
[Sat May 11 11:13:14 2013] 14.867100 total counts/ 0.000000 bgd. counts: snr = 1528638515042.648193
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.016271 pixels
  Position = (529.7, 568.0) = 3 10 39.04 -46 46 18.6
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 14.9 +/- 3.9
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Sat May 11 11:13:14 2013] Vigneting correction estimate = 1.000000
[Sat May 11 11:13:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 11:13:14 2013] Assessing source extent using major axis lower bound
[Sat May 11 11:13:14 2013] Source does appear to be extended
[Sat May 11 11:13:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 11:33:43 2013] Writing source region out to fullrun_ccd3_acisf13492_pi14-548_pass1_cl_src19_src.reg
[Sat May 11 11:33:43 2013] Extracting stamp from image fullrun_ccd3_acisf13492_pi14-548_cl_sm2.00.img.gz, (505, 543) - (555, 593)
[Sat May 11 11:33:43 2013] Writing fullrun_ccd3_acisf13492_pi14-548_pass1_cl_src19.gif
[Sat May 11 11:42:49 2013] Size of ../../acisf13492/products/events/fullrun_ccd3_acisf13492_pi14-548_pass1_cl_src19_src.evt.gz[events] = 14 counts
[Sat May 11 11:42:49 2013] Mean chipx,y = (424.57, 639.93)
[Sat May 11 11:42:49 2013] Mean tdetx,y = (4492.07, 3485.57)
[Sat May 11 11:42:49 2013] chipx,y range = (409.00-441.00, 623.00-654.00)
[Sat May 11 11:42:49 2013] Size of ../../acisf13492/products/events/fullrun_ccd3_acisf13492_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 7 counts
[Sat May 11 11:42:50 2013] Not generating rmf since there are only 14 counts
[Sat May 11 11:42:50 2013] arf not found, will run specextract
[Sat May 11 11:43:18 2013] ../../acisf13492/products/spectra/fullrun_ccd3_acisf13492_pi14-548_pass1_cl_src19.warf not found
[Sat May 11 11:43:18 2013] ../../acisf13492/products/spectra/fullrun_ccd3_acisf13492_pi14-548_pass1_cl_src19.wrmf not found
[Sat May 11 11:43:18 2013] Removal of ../../acisf13492/products/spectra/fullrun_ccd3_acisf13492_pi14-548_pass1_cl_src19.soff failed
[Sat May 11 11:48:15 2013] Spectrum 19 has only 15 counts, deleting rmf
[Sat May 11 11:48:15 2013] 191.649
[Sat May 11 11:50:57 2013] Updating aperture counts using extracted products
[Sat May 11 11:50:57 2013] Total counts from fullrun_ccd3_acisf13492_pi14-548_pass1_cl_src19_src.pi.gz = 14.00
[Sat May 11 11:50:57 2013] Total counts from fullrun_ccd3_acisf13492_pi14-548_pass1_cl_src19_bgd.pi.gz = 7.00
[Sat May 11 11:50:57 2013] Got source and background scale factors 0.000001, 0.000011
[Sat May 11 11:50:57 2013] User source parameters:
  Position = (529.7, 568.0) = 3 10 39.04 -46 46 18.6
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source aperture counts = 13.4 +/- 4.8
  Background aperture counts = 0.6
  Rate = 0.0004 +/- 0.0001

[Sat May 11 11:50:58 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 11:50:58 2013] Using photon index=1.80, rate=0.000405, arf fullrun_ccd3_acisf13492_pi14-548_pass1_cl_src19.arf
[Sat May 11 11:50:58 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat May 11 11:50:58 2013] Updating source flux to 5.1e-15
[Sat May 11 11:51:15 2013] Source 19 has fewer than 100.000000 counts, skipping spectral fitting