[Sat May 11 08:03:58 2013] Detection parameters:
  Position = (687.5, 976.3) = 3 10 50.63 -46 50 54.1
  Extent = 0.6" x 0.5", rotation angle = 4 degrees
  Source counts = 17.5 +/- 4.2
  Background counts = 0.5
  Rate = 0.0005 +/- 0.0001

[Sat May 11 08:03:58 2013] Off-axis axis estimate = 2.56'
[Sat May 11 08:38:45 2013] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Sat May 11 08:38:45 2013] Initial guess for spatial extent in simple fitting = 0.50"
[Sat May 11 08:38:45 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.974
[Sat May 11 08:38:45 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 0.50"
[Sat May 11 08:59:10 2013] fullrun_ccd2_acisf13492_pi14-548_cl_pass0_src9.ximg exists
[Sat May 11 08:59:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13492_pi14-548_cl_pass0_src9.csv
[Sat May 11 08:59:10 2013] fullrun_ccd2_acisf13492_pi14-548_cl_pass0_src9_1.ximg exists
[Sat May 11 08:59:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13492_pi14-548_cl_pass0_src9.csv
[Sat May 11 08:59:10 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13492_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13492_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 08:59:11 2013] fullrun_ccd2_acisf13492_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Sat May 11 08:59:11 2013] fullrun_ccd2_acisf13492_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Sat May 11 08:59:11 2013] Fit fullrun_ccd2_acisf13492_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Sat May 11 09:39:08 2013] Spatial fit model total counts = 16.694000, observed total counts = 20.000000
[Sat May 11 09:39:08 2013] Offset between fit and detection position for source 8 = 0.813423 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.813423 pixels
  Position = (687.9, 977.0) = 3 10 50.64 -46 50 54.0
  Extent = 0.8 (0.6-1.2)" x 0.3 (0.2-0.5)", rotation angle = 351 (336-6) degrees
  Source counts = 16.7 +/- 4.1
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Sat May 11 09:39:08 2013] Vigneting correction estimate = 1.000000
[Sat May 11 09:39:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 09:39:08 2013] Assessing source extent using major axis lower bound
[Sat May 11 09:39:08 2013] Source does appear to be extended
[Sat May 11 09:39:08 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.32
[Sat May 11 10:12:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 11 10:12:55 2013] Initial guess for spatial extent in simple fitting = 0.58"
[Sat May 11 10:12:55 2013] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.433
[Sat May 11 10:12:55 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 0.58"
[Sat May 11 10:33:19 2013] fullrun_ccd2_acisf13492_pi14-548_cl_pass1_src9.ximg exists
[Sat May 11 10:33:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13492_pi14-548_cl_pass1_src9.csv
[Sat May 11 10:33:19 2013] fullrun_ccd2_acisf13492_pi14-548_cl_pass1_src9_1.ximg exists
[Sat May 11 10:33:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13492_pi14-548_cl_pass1_src9.csv
[Sat May 11 10:33:19 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13492_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13492_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 10:33:19 2013] fullrun_ccd2_acisf13492_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sat May 11 10:33:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13492_pi14-548_cl_pass1_tfrozen_src9.csv
[Sat May 11 10:33:19 2013] fullrun_ccd2_acisf13492_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sat May 11 10:33:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13492_pi14-548_cl_pass1_tfrozen_src9.csv
[Sat May 11 10:33:19 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13492_pi14-548_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13492_pi14-548_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:13:11 2013] Spatial fit model total counts = 16.457100, observed total counts = 19.000000
[Sat May 11 11:13:11 2013] Offset between fit and detection position for source 8 = 0.012283 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.012283 pixels
  Position = (688.0, 977.0) = 3 10 50.64 -46 50 54.0
  Extent = 0.8 (0.6-1.2)" x 0.3 (0.2-0.5)", rotation angle = 350 (334-12) degrees
  Source counts = 16.4 +/- 4.1
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Sat May 11 11:13:11 2013] Vigneting correction estimate = 1.000000
[Sat May 11 11:13:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 11:13:11 2013] Assessing source extent using major axis lower bound
[Sat May 11 11:13:11 2013] Source does appear to be extended
[Sat May 11 11:13:11 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.22
[Sat May 11 11:21:32 2013] Writing source region out to fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src8_src.reg
[Sat May 11 11:21:32 2013] Extracting stamp from image fullrun_ccd2_acisf13492_pi14-548_cl_sm2.00.img.gz, (652, 941) - (724, 1013)
[Sat May 11 11:21:32 2013] Writing fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src8.gif
[Sat May 11 11:26:33 2013] Size of ../../acisf13492/products/events/fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src8_src.evt.gz[events] = 18 counts
[Sat May 11 11:26:33 2013] Mean chipx,y = (619.39, 814.06)
[Sat May 11 11:26:33 2013] Mean tdetx,y = (3875.06, 3466.61)
[Sat May 11 11:26:33 2013] chipx,y range = (599.00-635.00, 798.00-837.00)
[Sat May 11 11:26:33 2013] Size of ../../acisf13492/products/events/fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 8 counts
[Sat May 11 11:26:35 2013] Not generating rmf since there are only 16 counts
[Sat May 11 11:26:35 2013] arf not found, will run specextract
[Sat May 11 11:27:04 2013] ../../acisf13492/products/spectra/fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src8.warf not found
[Sat May 11 11:27:04 2013] ../../acisf13492/products/spectra/fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src8.wrmf not found
[Sat May 11 11:27:04 2013] Removal of ../../acisf13492/products/spectra/fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src8.soff failed
[Sat May 11 11:33:42 2013] Spectrum 8 has only 16 counts, deleting rmf
[Sat May 11 11:33:42 2013] 185.253
[Sat May 11 11:50:52 2013] Updating aperture counts using extracted products
[Sat May 11 11:50:52 2013] Total counts from fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src8_src.pi.gz = 18.00
[Sat May 11 11:50:52 2013] Total counts from fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src8_bgd.pi.gz = 8.00
[Sat May 11 11:50:52 2013] Got source and background scale factors 0.000001, 0.000023
[Sat May 11 11:50:53 2013] User source parameters:
  Position = (688.0, 977.0) = 3 10 50.64 -46 50 54.0
  Extent = 0.8 (0.6-1.2)" x 0.3 (0.2-0.5)", rotation angle = 350 (334-12) degrees
  Source aperture counts = 17.7 +/- 5.3
  Background aperture counts = 0.3
  Rate = 0.0005 +/- 0.0001

[Sat May 11 11:50:54 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 11:50:54 2013] Using photon index=1.80, rate=0.000448, arf fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src8.arf
[Sat May 11 11:50:54 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat May 11 11:50:54 2013] Updating source flux to 5.8e-15
[Sat May 11 11:51:14 2013] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 11 11:51:15 2013] acisf13492/analysis//spectral/fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete