[Sat May 11 08:03:58 2013] Detection parameters:
  Position = (1112.3, 823.0) = 3 10 30.26 -46 52 9.5
  Extent = 0.5" x 0.5", rotation angle = 138 degrees
  Source counts = 10.5 +/- 3.3
  Background counts = 0.5
  Rate = 0.0003 +/- 9e-05

[Sat May 11 08:03:58 2013] Off-axis axis estimate = 2.58'
[Sat May 11 08:38:45 2013] Using EEF radius (= 0.51 ")to estimate initial spatial extent for simple fitting
[Sat May 11 08:38:45 2013] Initial guess for spatial extent in simple fitting = 0.51"
[Sat May 11 08:38:45 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.965
[Sat May 11 08:38:45 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 0.51"
[Sat May 11 08:59:10 2013] fullrun_ccd2_acisf13492_pi14-548_cl_pass0_src17.ximg exists
[Sat May 11 08:59:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13492_pi14-548_cl_pass0_src17.csv
[Sat May 11 08:59:10 2013] fullrun_ccd2_acisf13492_pi14-548_cl_pass0_src17_1.ximg exists
[Sat May 11 08:59:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13492_pi14-548_cl_pass0_src17.csv
[Sat May 11 08:59:10 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13492_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13492_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 08:59:11 2013] fullrun_ccd2_acisf13492_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Sat May 11 08:59:11 2013] fullrun_ccd2_acisf13492_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Sat May 11 08:59:11 2013] Fit fullrun_ccd2_acisf13492_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Sat May 11 09:39:08 2013] Spatial fit model total counts = 10.611000, observed total counts = 14.000000
[Sat May 11 09:39:08 2013] Offset between fit and detection position for source 5 = 0.456395 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.456395 pixels
  Position = (1112.5, 823.4) = 3 10 30.27 -46 52 9.6
  Extent = 0.7 (0.5-1.2)" x 0.2 (0.1-0.4)", rotation angle = 66 (47-81) degrees
  Source counts = 10.9 +/- 3.3
  Background counts = 0.0
  Rate = 0.0003 +/- 9e-05
[Sat May 11 09:39:08 2013] Vigneting correction estimate = 1.000000
[Sat May 11 09:39:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 09:39:08 2013] Assessing source extent using major axis lower bound
[Sat May 11 09:39:08 2013] Source does appear to be extended
[Sat May 11 09:39:08 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.28
[Sat May 11 10:12:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 11 10:12:55 2013] Initial guess for spatial extent in simple fitting = 0.45"
[Sat May 11 10:12:55 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.136
[Sat May 11 10:12:55 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 0.45"
[Sat May 11 10:33:19 2013] fullrun_ccd2_acisf13492_pi14-548_cl_pass1_src17.ximg exists
[Sat May 11 10:33:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13492_pi14-548_cl_pass1_src17.csv
[Sat May 11 10:33:19 2013] fullrun_ccd2_acisf13492_pi14-548_cl_pass1_src17_1.ximg exists
[Sat May 11 10:33:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13492_pi14-548_cl_pass1_src17.csv
[Sat May 11 10:33:19 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13492_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13492_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 10:33:19 2013] fullrun_ccd2_acisf13492_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Sat May 11 10:33:19 2013] fullrun_ccd2_acisf13492_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Sat May 11 10:33:19 2013] Fit fullrun_ccd2_acisf13492_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Sat May 11 11:13:11 2013] Spatial fit model total counts = 15.032200, observed total counts = 14.000000
[Sat May 11 11:13:11 2013] Offset between fit and detection position for source 5 = 0.516302 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.516302 pixels
  Position = (1113.1, 823.5) = 3 10 30.25 -46 52 9.6
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 15.0 +/- 3.9
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Sat May 11 11:13:11 2013] Vigneting correction estimate = 1.000000
[Sat May 11 11:13:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 11:13:11 2013] Assessing source extent using major axis lower bound
[Sat May 11 11:13:11 2013] Source does appear to be extended
[Sat May 11 11:13:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 11:21:32 2013] Writing source region out to fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src5_src.reg
[Sat May 11 11:21:32 2013] Extracting stamp from image fullrun_ccd2_acisf13492_pi14-548_cl_sm2.00.img.gz, (1087, 798) - (1139, 849)
[Sat May 11 11:21:33 2013] Writing fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src5.gif
[Sat May 11 11:30:54 2013] Size of ../../acisf13492/products/events/fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src5_src.evt.gz[events] = 13 counts
[Sat May 11 11:30:54 2013] Mean chipx,y = (162.15, 837.15)
[Sat May 11 11:30:54 2013] Mean tdetx,y = (3898.15, 3923.85)
[Sat May 11 11:30:54 2013] chipx,y range = (149.00-182.00, 817.00-855.00)
[Sat May 11 11:30:54 2013] Size of ../../acisf13492/products/events/fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 7 counts
[Sat May 11 11:30:55 2013] Not generating rmf since there are only 15 counts
[Sat May 11 11:30:55 2013] arf not found, will run specextract
[Sat May 11 11:31:23 2013] ../../acisf13492/products/spectra/fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src5.warf not found
[Sat May 11 11:31:23 2013] ../../acisf13492/products/spectra/fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src5.wrmf not found
[Sat May 11 11:31:23 2013] Removal of ../../acisf13492/products/spectra/fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src5.soff failed
[Sat May 11 11:33:42 2013] Spectrum 5 has only 15 counts, deleting rmf
[Sat May 11 11:33:42 2013] 195.457
[Sat May 11 11:50:53 2013] Updating aperture counts using extracted products
[Sat May 11 11:50:53 2013] Total counts from fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src5_src.pi.gz = 13.00
[Sat May 11 11:50:53 2013] Total counts from fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src5_bgd.pi.gz = 7.00
[Sat May 11 11:50:53 2013] Got source and background scale factors 0.000001, 0.000012
[Sat May 11 11:50:53 2013] User source parameters:
  Position = (1113.1, 823.5) = 3 10 30.25 -46 52 9.6
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source aperture counts = 12.4 +/- 4.7
  Background aperture counts = 0.6
  Rate = 0.0003 +/- 0.0001

[Sat May 11 11:50:54 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 11:50:54 2013] Using photon index=1.80, rate=0.00041, arf fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src5.arf
[Sat May 11 11:50:54 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat May 11 11:50:54 2013] Updating source flux to 4.9e-15
[Sat May 11 11:51:14 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 11 11:51:15 2013] acisf13492/analysis//spectral/fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete