[Sat May 11 08:03:58 2013] Detection parameters:
  Position = (604.4, 1161.8) = 3 10 54.61 -46 49 22.8
  Extent = 0.5" x 0.5", rotation angle = 82 degrees
  Source counts = 13.5 +/- 3.7
  Background counts = 0.5
  Rate = 0.0004 +/- 0.0001

[Sat May 11 08:03:58 2013] Off-axis axis estimate = 3.05'
[Sat May 11 08:38:45 2013] Using EEF radius (= 0.59 ")to estimate initial spatial extent for simple fitting
[Sat May 11 08:38:45 2013] Initial guess for spatial extent in simple fitting = 0.59"
[Sat May 11 08:38:45 2013] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.779
[Sat May 11 08:38:45 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 0.59"
[Sat May 11 08:59:10 2013] fullrun_ccd2_acisf13492_pi14-548_cl_pass0_src13.ximg exists
[Sat May 11 08:59:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13492_pi14-548_cl_pass0_src13.csv
[Sat May 11 08:59:10 2013] fullrun_ccd2_acisf13492_pi14-548_cl_pass0_src13_1.ximg exists
[Sat May 11 08:59:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13492_pi14-548_cl_pass0_src13.csv
[Sat May 11 08:59:10 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13492_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13492_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 08:59:11 2013] fullrun_ccd2_acisf13492_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Sat May 11 08:59:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13492_pi14-548_cl_pass0_tfrozen_src13.csv
[Sat May 11 08:59:11 2013] fullrun_ccd2_acisf13492_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Sat May 11 08:59:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13492_pi14-548_cl_pass0_tfrozen_src13.csv
[Sat May 11 08:59:11 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13492_pi14-548_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13492_pi14-548_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 09:39:08 2013] Spatial fit model total counts = 13.849700, observed total counts = 15.000000
[Sat May 11 09:39:08 2013] Offset between fit and detection position for source 10 = 0.663850 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.663850 pixels
  Position = (604.9, 1162.2) = 3 10 54.61 -46 49 22.8
  Extent = 0.7 (0.5-1.1)" x 0.3 (0.2-0.5)", rotation angle = 98 (77-119) degrees
  Source counts = 14.4 +/- 3.8
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Sat May 11 09:39:08 2013] Vigneting correction estimate = 1.000000
[Sat May 11 09:39:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 09:39:08 2013] Assessing source extent using major axis lower bound
[Sat May 11 09:39:08 2013] Source does appear to be extended
[Sat May 11 09:39:08 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.09
[Sat May 11 10:12:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 11 10:12:55 2013] Initial guess for spatial extent in simple fitting = 0.52"
[Sat May 11 10:12:55 2013] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.922
[Sat May 11 10:12:55 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 0.52"
[Sat May 11 10:33:19 2013] fullrun_ccd2_acisf13492_pi14-548_cl_pass1_src13.ximg exists
[Sat May 11 10:33:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13492_pi14-548_cl_pass1_src13.csv
[Sat May 11 10:33:19 2013] fullrun_ccd2_acisf13492_pi14-548_cl_pass1_src13_1.ximg exists
[Sat May 11 10:33:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13492_pi14-548_cl_pass1_src13.csv
[Sat May 11 10:33:19 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13492_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13492_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 10:33:19 2013] fullrun_ccd2_acisf13492_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Sat May 11 10:33:19 2013] fullrun_ccd2_acisf13492_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Sat May 11 10:33:19 2013] Fit fullrun_ccd2_acisf13492_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Sat May 11 11:13:11 2013] Spatial fit model total counts = 13.889300, observed total counts = 15.000000
[Sat May 11 11:13:11 2013] Offset between fit and detection position for source 10 = 0.046146 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.046146 pixels
  Position = (604.9, 1162.3) = 3 10 54.61 -46 49 22.8
  Extent = 0.7 (0.5-1.1)" x 0.3 (0.2-0.5)", rotation angle = 97 (78-119) degrees
  Source counts = 14.3 +/- 3.8
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Sat May 11 11:13:11 2013] Vigneting correction estimate = 1.000000
[Sat May 11 11:13:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 11:13:11 2013] Assessing source extent using major axis lower bound
[Sat May 11 11:13:11 2013] Source does appear to be extended
[Sat May 11 11:13:11 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.03
[Sat May 11 11:21:32 2013] Writing source region out to fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src10_src.reg
[Sat May 11 11:21:32 2013] Extracting stamp from image fullrun_ccd2_acisf13492_pi14-548_cl_sm2.00.img.gz, (573, 1130) - (637, 1194)
[Sat May 11 11:21:32 2013] Writing fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src10.gif
[Sat May 11 11:28:28 2013] Size of ../../acisf13492/products/events/fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src10_src.evt.gz[events] = 14 counts
[Sat May 11 11:28:28 2013] Mean chipx,y = (762.64, 958.57)
[Sat May 11 11:28:28 2013] Mean tdetx,y = (4019.57, 3323.36)
[Sat May 11 11:28:28 2013] chipx,y range = (743.00-781.00, 944.00-975.00)
[Sat May 11 11:28:28 2013] Size of ../../acisf13492/products/events/fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 13 counts
[Sat May 11 11:28:29 2013] Not generating rmf since there are only 14 counts
[Sat May 11 11:28:29 2013] arf not found, will run specextract
[Sat May 11 11:29:00 2013] ../../acisf13492/products/spectra/fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src10.warf not found
[Sat May 11 11:29:00 2013] ../../acisf13492/products/spectra/fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src10.wrmf not found
[Sat May 11 11:29:00 2013] Removal of ../../acisf13492/products/spectra/fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src10.soff failed
[Sat May 11 11:33:42 2013] Spectrum 10 has only 14 counts, deleting rmf
[Sat May 11 11:33:42 2013] 180.162
[Sat May 11 11:50:53 2013] Updating aperture counts using extracted products
[Sat May 11 11:50:53 2013] Total counts from fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src10_src.pi.gz = 14.00
[Sat May 11 11:50:53 2013] Total counts from fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src10_bgd.pi.gz = 13.00
[Sat May 11 11:50:53 2013] Got source and background scale factors 0.000001, 0.000018
[Sat May 11 11:50:53 2013] User source parameters:
  Position = (604.9, 1162.3) = 3 10 54.61 -46 49 22.8
  Extent = 0.7 (0.5-1.1)" x 0.3 (0.2-0.5)", rotation angle = 97 (78-119) degrees
  Source aperture counts = 13.5 +/- 4.8
  Background aperture counts = 0.5
  Rate = 0.0004 +/- 0.0001

[Sat May 11 11:50:54 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 11:50:54 2013] Using photon index=1.80, rate=0.000391, arf fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src10.arf
[Sat May 11 11:50:54 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat May 11 11:50:54 2013] Updating source flux to 5.3e-15
[Sat May 11 11:51:14 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 11 11:51:15 2013] acisf13492/analysis//spectral/fullrun_ccd2_acisf13492_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete