[Fri May  3 16:34:56 2013] Detection parameters:
  Position = (1367.5, 849.9) = 1 23 38.32 -48 22 40.4
  Extent = 0.5" x 0.5", rotation angle = 42 degrees
  Source counts = 98.4 +/- 10.0
  Background counts = 2.6
  Rate = 0.001 +/- 0.0001

[Fri May  3 16:34:56 2013] Off-axis axis estimate = 3.71'
[Fri May  3 16:39:59 2013] Using EEF radius (= 0.75 ")to estimate initial spatial extent for simple fitting
[Fri May  3 16:39:59 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  3 16:39:59 2013] Initial guess for spatial extent in simple fitting = 0.75"
[Fri May  3 16:39:59 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.983
[Fri May  3 16:39:59 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 0.75"
[Fri May  3 17:13:58 2013] fullrun_ccd0_acisf13491_pi14-548_cl_pass0_src1.ximg exists
[Fri May  3 17:13:58 2013] fullrun_ccd0_acisf13491_pi14-548_cl_pass0_src1_1.ximg exists
[Fri May  3 17:13:58 2013] Fit fullrun_ccd0_acisf13491_pi14-548_cl_pass0_src1 appears to have run properly
[Fri May  3 17:13:59 2013] fullrun_ccd0_acisf13491_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri May  3 17:13:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13491_pi14-548_cl_pass0_tfrozen_src1.csv
[Fri May  3 17:13:59 2013] fullrun_ccd0_acisf13491_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May  3 17:13:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13491_pi14-548_cl_pass0_tfrozen_src1.csv
[Fri May  3 17:13:59 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13491_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13491_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 19:10:19 2013] Spatial fit model total counts = 106.523000, observed total counts = 109.000000
[Fri May  3 19:10:19 2013] Offset between fit and detection position for source 1 = 0.761643 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.761643 pixels
  Position = (1368.0, 850.4) = 1 23 38.32 -48 22 40.3
  Extent = 1.1 (1.0-1.3)" x 0.7 (0.5-0.8)", rotation angle = 315 (301-327) degrees
  Source counts = 105.6 +/- 10.3
  Background counts = 0.0
  Rate = 0.001 +/- 0.0001
[Fri May  3 19:10:19 2013] Vigneting correction estimate = 1.000000
[Fri May  3 19:10:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 19:10:19 2013] Assessing source extent using major axis lower bound
[Fri May  3 19:10:19 2013] Source does appear to be extended
[Fri May  3 19:10:19 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.23
[Fri May  3 19:10:56 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 19:10:56 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  3 19:10:56 2013] Initial guess for spatial extent in simple fitting = 0.91"
[Fri May  3 19:10:56 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.912
[Fri May  3 19:10:56 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 0.91"
[Fri May  3 19:49:08 2013] fullrun_ccd0_acisf13491_pi14-548_cl_pass1_src1.ximg exists
[Fri May  3 19:49:08 2013] fullrun_ccd0_acisf13491_pi14-548_cl_pass1_src1_1.ximg exists
[Fri May  3 19:49:08 2013] Fit fullrun_ccd0_acisf13491_pi14-548_cl_pass1_src1 appears to have run properly
[Fri May  3 19:49:08 2013] fullrun_ccd0_acisf13491_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri May  3 19:49:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13491_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri May  3 19:49:08 2013] fullrun_ccd0_acisf13491_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May  3 19:49:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13491_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri May  3 19:49:08 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13491_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13491_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 21:37:51 2013] Spatial fit model total counts = 106.238000, observed total counts = 110.000000
[Fri May  3 21:37:51 2013] Offset between fit and detection position for source 1 = 0.077691 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.077691 pixels
  Position = (1368.0, 850.4) = 1 23 38.32 -48 22 40.4
  Extent = 1.1 (1.0-1.3)" x 0.7 (0.5-0.8)", rotation angle = 134 (120-147) degrees
  Source counts = 105.0 +/- 10.2
  Background counts = 0.0
  Rate = 0.001 +/- 0.0001
[Fri May  3 21:37:51 2013] Vigneting correction estimate = 1.000000
[Fri May  3 21:37:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 21:37:51 2013] Assessing source extent using major axis lower bound
[Fri May  3 21:37:51 2013] Source does appear to be extended
[Fri May  3 21:37:51 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.21
[Fri May  3 21:38:19 2013] Writing source region out to fullrun_ccd0_acisf13491_pi14-548_pass1_cl_src1_src.reg
[Fri May  3 21:38:19 2013] Extracting stamp from image fullrun_ccd0_acisf13491_pi14-548_cl_sm2.00.img.gz, (1317, 800) - (1401, 901)
[Fri May  3 21:38:19 2013] Writing fullrun_ccd0_acisf13491_pi14-548_pass1_cl_src1.gif
[Fri May  3 21:38:21 2013] Size of ../../acisf13491/products/events/fullrun_ccd0_acisf13491_pi14-548_pass1_cl_src1_src.evt.gz[events] = 107 counts
[Fri May  3 21:38:21 2013] Mean chipx,y = (988.50, 1010.76)
[Fri May  3 21:38:21 2013] Mean tdetx,y = (4071.76, 4143.50)
[Fri May  3 21:38:21 2013] chipx,y range = (972.00-1007.00, 1003.00-1022.00)
[Fri May  3 21:38:21 2013] Size of ../../acisf13491/products/events/fullrun_ccd0_acisf13491_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 21 counts
[Fri May  3 21:38:22 2013] rmf not found, will run specextract
[Fri May  3 21:38:22 2013] arf not found, will run specextract
[Fri May  3 21:38:56 2013] ../../acisf13491/products/spectra/fullrun_ccd0_acisf13491_pi14-548_pass1_cl_src1.warf not found
[Fri May  3 21:38:56 2013] ../../acisf13491/products/spectra/fullrun_ccd0_acisf13491_pi14-548_pass1_cl_src1.wrmf not found
[Fri May  3 21:38:56 2013] Removal of ../../acisf13491/products/spectra/fullrun_ccd0_acisf13491_pi14-548_pass1_cl_src1.soff failed
[Fri May  3 21:45:30 2013] Keeping rmf generated by specextract
[Fri May  3 21:45:31 2013] 96.2043
[Fri May  3 22:32:07 2013] Updating aperture counts using extracted products
[Fri May  3 22:32:07 2013] Total counts from fullrun_ccd0_acisf13491_pi14-548_pass1_cl_src1_src.pi.gz = 107.00
[Fri May  3 22:32:07 2013] Total counts from fullrun_ccd0_acisf13491_pi14-548_pass1_cl_src1_bgd.pi.gz = 21.00
[Fri May  3 22:32:07 2013] Got source and background scale factors 0.000002, 0.000041
[Fri May  3 22:32:07 2013] User source parameters:
  Position = (1368.0, 850.4) = 1 23 38.32 -48 22 40.4
  Extent = 1.1 (1.0-1.3)" x 0.7 (0.5-0.8)", rotation angle = 134 (120-147) degrees
  Source aperture counts = 105.8 +/- 11.4
  Background aperture counts = 1.2
  Rate = 0.001 +/- 0.0002

[Fri May  3 22:32:08 2013] Calculating source flux in energy range 0.30-8.00
[Fri May  3 22:32:08 2013] Using photon index=1.80, rate=0.00148, arf fullrun_ccd0_acisf13491_pi14-548_pass1_cl_src1.arf
[Fri May  3 22:32:08 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May  3 22:32:08 2013] Updating source flux to 3.6e-14
[Fri May  3 22:32:36 2013] Reading fit data from acisf13491/analysis//spectral/fullrun_ccd0_acisf13491_pi14-548_pass1_cl_src1_pl.csv
[Fri May  3 22:32:36 2013] Spectral fit parameter nH value = 6.546e+14
[Fri May  3 22:32:36 2013] Spectral fit parameter PhoIndex value = 1.72279
[Fri May  3 22:32:36 2013] Failed to get F(0.3-8.0) from acisf13491/analysis//spectral/fullrun_ccd0_acisf13491_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri May  3 22:32:36 2013] Calculating source flux in energy range 0.30-8.00
[Fri May  3 22:32:36 2013] Using Nh = 6.5e+14, photon index=1.72, rate=0.00148, arf fullrun_ccd0_acisf13491_pi14-548_pass1_cl_src1.arf
[Fri May  3 22:32:36 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May  3 22:32:36 2013] Updating source flux to 3.7e-14