[Sun May 12 21:07:34 2013] Detection parameters:
  Position = (175.4, 587.0) = 3 53 16.49 -56 48 5.4
  Extent = 0.5" x 0.5", rotation angle = 175 degrees
  Source counts = 17.5 +/- 4.2
  Background counts = 0.5
  Rate = 0.0005 +/- 0.0001

[Sun May 12 21:07:34 2013] Off-axis axis estimate = 1.89'
[Sun May 12 22:01:46 2013] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Sun May 12 22:01:46 2013] Initial guess for spatial extent in simple fitting = 0.42"
[Sun May 12 22:01:46 2013] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.818
[Sun May 12 22:01:46 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 0.42"
[Sun May 12 22:09:56 2013] fullrun_ccd3_acisf13490_pi14-548_cl_pass0_src6.ximg exists
[Sun May 12 22:09:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13490_pi14-548_cl_pass0_src6.csv
[Sun May 12 22:09:56 2013] fullrun_ccd3_acisf13490_pi14-548_cl_pass0_src6_1.ximg exists
[Sun May 12 22:09:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13490_pi14-548_cl_pass0_src6.csv
[Sun May 12 22:09:56 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13490_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13490_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 22:09:56 2013] fullrun_ccd3_acisf13490_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sun May 12 22:09:56 2013] fullrun_ccd3_acisf13490_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sun May 12 22:09:56 2013] Fit fullrun_ccd3_acisf13490_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Sun May 12 22:32:24 2013] Spatial fit model total counts = 16.762700, observed total counts = 19.000000
[Sun May 12 22:32:24 2013] Offset between fit and detection position for source 10 = 0.487703 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.487703 pixels
  Position = (175.6, 587.4) = 3 53 16.51 -56 48 5.4
  Extent = 0.5 (0.4-0.7)" x 0.2 (0.2-0.3)", rotation angle = 232 (214-251) degrees
  Source counts = 17.0 +/- 4.1
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Sun May 12 22:32:24 2013] Vigneting correction estimate = 1.000000
[Sun May 12 22:32:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 22:32:24 2013] Assessing source extent using major axis lower bound
[Sun May 12 22:32:24 2013] Source does appear to be extended
[Sun May 12 22:32:24 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.30
[Sun May 12 23:22:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 23:22:14 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Sun May 12 23:22:14 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.329
[Sun May 12 23:22:14 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 0.39"
[Sun May 12 23:30:16 2013] fullrun_ccd3_acisf13490_pi14-548_cl_pass1_src6.ximg exists
[Sun May 12 23:30:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13490_pi14-548_cl_pass1_src6.csv
[Sun May 12 23:30:16 2013] fullrun_ccd3_acisf13490_pi14-548_cl_pass1_src6_1.ximg exists
[Sun May 12 23:30:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13490_pi14-548_cl_pass1_src6.csv
[Sun May 12 23:30:16 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13490_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13490_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 23:30:16 2013] fullrun_ccd3_acisf13490_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sun May 12 23:30:16 2013] fullrun_ccd3_acisf13490_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sun May 12 23:30:16 2013] Fit fullrun_ccd3_acisf13490_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Sun May 12 23:51:58 2013] Spatial fit model total counts = 17.355500, observed total counts = 19.000000
[Sun May 12 23:51:58 2013] Offset between fit and detection position for source 10 = 0.032143 pixels
[Sun May 12 23:51:58 2013] 17.545862 total counts/ 0.538962 bgd. counts: snr = 23.165735
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.032143 pixels
  Position = (175.6, 587.4) = 3 53 16.51 -56 48 5.4
  Extent = 0.5 (0.4-0.8)" x 0.2 (0.2-0.3)", rotation angle = 232 (215-250) degrees
  Source counts = 17.0 +/- 4.2
  Background counts = 0.5
  Rate = 0.0005 +/- 0.0001
[Sun May 12 23:51:58 2013] Vigneting correction estimate = 1.000000
[Sun May 12 23:51:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 23:51:58 2013] Assessing source extent using major axis lower bound
[Sun May 12 23:51:58 2013] Source does appear to be extended
[Sun May 12 23:51:58 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.29
[Mon May 13 00:13:51 2013] Writing source region out to fullrun_ccd3_acisf13490_pi14-548_pass1_cl_src10_src.reg
[Mon May 13 00:13:51 2013] Extracting stamp from image fullrun_ccd3_acisf13490_pi14-548_cl_sm2.00.img.gz, (151, 563) - (200, 612)
[Mon May 13 00:13:51 2013] Writing fullrun_ccd3_acisf13490_pi14-548_pass1_cl_src10.gif
[Mon May 13 00:16:54 2013] Size of ../../acisf13490/products/events/fullrun_ccd3_acisf13490_pi14-548_pass1_cl_src10_src.evt.gz[events] = 16 counts
[Mon May 13 00:16:54 2013] Mean chipx,y = (831.50, 912.00)
[Mon May 13 00:16:54 2013] Mean tdetx,y = (4220.00, 3892.50)
[Mon May 13 00:16:54 2013] chipx,y range = (817.00-851.00, 898.00-931.00)
[Mon May 13 00:16:54 2013] Size of ../../acisf13490/products/events/fullrun_ccd3_acisf13490_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 4 counts
[Mon May 13 00:16:55 2013] Not generating rmf since there are only 17 counts
[Mon May 13 00:16:55 2013] arf not found, will run specextract
[Mon May 13 00:17:23 2013] ../../acisf13490/products/spectra/fullrun_ccd3_acisf13490_pi14-548_pass1_cl_src10.warf not found
[Mon May 13 00:17:23 2013] ../../acisf13490/products/spectra/fullrun_ccd3_acisf13490_pi14-548_pass1_cl_src10.wrmf not found
[Mon May 13 00:17:23 2013] Removal of ../../acisf13490/products/spectra/fullrun_ccd3_acisf13490_pi14-548_pass1_cl_src10.soff failed
[Mon May 13 00:24:45 2013] Spectrum 10 has only 17 counts, deleting rmf
[Mon May 13 00:24:45 2013] 202.045
[Mon May 13 00:27:13 2013] Updating aperture counts using extracted products
[Mon May 13 00:27:13 2013] Total counts from fullrun_ccd3_acisf13490_pi14-548_pass1_cl_src10_src.pi.gz = 16.00
[Mon May 13 00:27:13 2013] Total counts from fullrun_ccd3_acisf13490_pi14-548_pass1_cl_src10_bgd.pi.gz = 4.00
[Mon May 13 00:27:13 2013] Got source and background scale factors 0.000000, 0.000010
[Mon May 13 00:27:13 2013] User source parameters:
  Position = (175.6, 587.4) = 3 53 16.51 -56 48 5.4
  Extent = 0.5 (0.4-0.8)" x 0.2 (0.2-0.3)", rotation angle = 232 (215-250) degrees
  Source aperture counts = 15.8 +/- 5.1
  Background aperture counts = 0.2
  Rate = 0.0004 +/- 0.0001

[Mon May 13 00:27:14 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 00:27:14 2013] Using photon index=1.80, rate=0.000483, arf fullrun_ccd3_acisf13490_pi14-548_pass1_cl_src10.arf
[Mon May 13 00:27:14 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 13 00:27:14 2013] Updating source flux to 5.7e-15
[Mon May 13 00:27:27 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 00:27:28 2013] acisf13490/analysis//spectral/fullrun_ccd3_acisf13490_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete