[Sun May 12 21:07:34 2013] Detection parameters:
  Position = (285.4, 963.3) = 3 53 9.91 -56 45 0.3
  Extent = 0.5" x 0.5", rotation angle = 58 degrees
  Source counts = 32.3 +/- 5.7
  Background counts = 0.7
  Rate = 0.0009 +/- 0.0002

[Sun May 12 21:07:34 2013] Off-axis axis estimate = 1.46'
[Sun May 12 22:01:46 2013] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sun May 12 22:01:46 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Sun May 12 22:01:46 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.344
[Sun May 12 22:01:46 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 0.39"
[Sun May 12 22:09:56 2013] fullrun_ccd3_acisf13490_pi14-548_cl_pass0_src2.ximg exists
[Sun May 12 22:09:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13490_pi14-548_cl_pass0_src2.csv
[Sun May 12 22:09:56 2013] fullrun_ccd3_acisf13490_pi14-548_cl_pass0_src2_1.ximg exists
[Sun May 12 22:09:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13490_pi14-548_cl_pass0_src2.csv
[Sun May 12 22:09:56 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13490_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13490_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 22:09:56 2013] fullrun_ccd3_acisf13490_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sun May 12 22:09:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13490_pi14-548_cl_pass0_tfrozen_src2.csv
[Sun May 12 22:09:56 2013] fullrun_ccd3_acisf13490_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sun May 12 22:09:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13490_pi14-548_cl_pass0_tfrozen_src2.csv
[Sun May 12 22:09:56 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13490_pi14-548_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13490_pi14-548_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 22:32:24 2013] Spatial fit model total counts = 31.942600, observed total counts = 35.000000
[Sun May 12 22:32:24 2013] Offset between fit and detection position for source 1 = 0.719001 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.719001 pixels
  Position = (285.9, 963.8) = 3 53 9.91 -56 45 0.2
  Extent = 0.5 (0.4-0.7)" x 0.4 (0.3-0.4)", rotation angle = 120 (96-148) degrees
  Source counts = 32.6 +/- 5.7
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Sun May 12 22:32:24 2013] Vigneting correction estimate = 1.000000
[Sun May 12 22:32:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 22:32:24 2013] Assessing source extent using major axis lower bound
[Sun May 12 22:32:24 2013] Source does appear to be extended
[Sun May 12 22:32:24 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.98
[Sun May 12 23:22:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 23:22:14 2013] Initial guess for spatial extent in simple fitting = 0.44"
[Sun May 12 23:22:14 2013] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.765
[Sun May 12 23:22:14 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 0.44"
[Sun May 12 23:30:16 2013] fullrun_ccd3_acisf13490_pi14-548_cl_pass1_src2.ximg exists
[Sun May 12 23:30:16 2013] fullrun_ccd3_acisf13490_pi14-548_cl_pass1_src2_1.ximg exists
[Sun May 12 23:30:16 2013] Fit fullrun_ccd3_acisf13490_pi14-548_cl_pass1_src2 appears to have run properly
[Sun May 12 23:30:16 2013] fullrun_ccd3_acisf13490_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sun May 12 23:30:16 2013] fullrun_ccd3_acisf13490_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sun May 12 23:30:16 2013] Fit fullrun_ccd3_acisf13490_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Sun May 12 23:51:58 2013] Spatial fit model total counts = 32.567900, observed total counts = 35.000000
[Sun May 12 23:51:58 2013] Offset between fit and detection position for source 1 = 0.008893 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.008893 pixels
  Position = (285.9, 963.8) = 3 53 9.91 -56 45 0.2
  Extent = 0.5 (0.4-0.7)" x 0.4 (0.3-0.5)", rotation angle = 121 (90-149) degrees
  Source counts = 33.0 +/- 5.7
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Sun May 12 23:51:58 2013] Vigneting correction estimate = 1.000000
[Sun May 12 23:51:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 23:51:58 2013] Assessing source extent using major axis lower bound
[Sun May 12 23:51:58 2013] Source does appear to be extended
[Sun May 12 23:51:58 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.94
[Mon May 13 00:13:51 2013] Writing source region out to fullrun_ccd3_acisf13490_pi14-548_pass1_cl_src1_src.reg
[Mon May 13 00:13:51 2013] Extracting stamp from image fullrun_ccd3_acisf13490_pi14-548_cl_sm2.00.img.gz, (262, 940) - (310, 988)
[Mon May 13 00:13:51 2013] Writing fullrun_ccd3_acisf13490_pi14-548_pass1_cl_src1.gif
[Mon May 13 00:14:35 2013] Size of ../../acisf13490/products/events/fullrun_ccd3_acisf13490_pi14-548_pass1_cl_src1_src.evt.gz[events] = 33 counts
[Mon May 13 00:14:35 2013] Mean chipx,y = (455.21, 999.70)
[Mon May 13 00:14:35 2013] Mean tdetx,y = (4132.30, 3516.21)
[Mon May 13 00:14:35 2013] chipx,y range = (434.00-468.00, 982.00-1017.00)
[Mon May 13 00:14:35 2013] Size of ../../acisf13490/products/events/fullrun_ccd3_acisf13490_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 3 counts
[Mon May 13 00:14:36 2013] Not generating rmf since there are only 32 counts
[Mon May 13 00:14:36 2013] arf not found, will run specextract
[Mon May 13 00:15:06 2013] ../../acisf13490/products/spectra/fullrun_ccd3_acisf13490_pi14-548_pass1_cl_src1.warf not found
[Mon May 13 00:15:06 2013] ../../acisf13490/products/spectra/fullrun_ccd3_acisf13490_pi14-548_pass1_cl_src1.wrmf not found
[Mon May 13 00:15:06 2013] Removal of ../../acisf13490/products/spectra/fullrun_ccd3_acisf13490_pi14-548_pass1_cl_src1.soff failed
[Mon May 13 00:24:45 2013] Spectrum 1 has only 33 counts, deleting rmf
[Mon May 13 00:24:45 2013] 195.242
[Mon May 13 00:27:12 2013] Updating aperture counts using extracted products
[Mon May 13 00:27:12 2013] Total counts from fullrun_ccd3_acisf13490_pi14-548_pass1_cl_src1_src.pi.gz = 33.00
[Mon May 13 00:27:12 2013] Total counts from fullrun_ccd3_acisf13490_pi14-548_pass1_cl_src1_bgd.pi.gz = 3.00
[Mon May 13 00:27:12 2013] Got source and background scale factors 0.000001, 0.000010
[Mon May 13 00:27:12 2013] User source parameters:
  Position = (285.9, 963.8) = 3 53 9.91 -56 45 0.2
  Extent = 0.5 (0.4-0.7)" x 0.4 (0.3-0.5)", rotation angle = 121 (90-149) degrees
  Source aperture counts = 32.8 +/- 6.8
  Background aperture counts = 0.2
  Rate = 0.0009 +/- 0.0002

[Mon May 13 00:27:14 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 00:27:14 2013] Using photon index=1.80, rate=0.000936, arf fullrun_ccd3_acisf13490_pi14-548_pass1_cl_src1.arf
[Mon May 13 00:27:14 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 13 00:27:14 2013] Updating source flux to 1.2e-14
[Mon May 13 00:27:27 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 00:27:28 2013] acisf13490/analysis//spectral/fullrun_ccd3_acisf13490_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete