[Tue Mar 13 04:12:40 2012] Detection parameters:
  Position = (706.5, 1246.5) = 1 55 42.43 -55 44 1.5
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 464.5 +/- 21.7
  Background counts = 6.5
  Rate = 0.006 +/- 0.0003

[Tue Mar 13 04:12:41 2012] Off-axis axis estimate = 1.85'
[Tue Mar 13 06:36:45 2012] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 06:36:45 2012] Initial guess for spatial extent in simple fitting = 0.42"
[Tue Mar 13 06:36:45 2012] source mask rpix=0.8, npix_max = 7, mask sum = 5, frac = 0.690
[Tue Mar 13 06:36:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.42"
[Tue Mar 13 07:20:06 2012] fullrun_ccd2_acisf13489_pi14-548_cl_pass0_src1.ximg exists
[Tue Mar 13 07:20:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13489_pi14-548_cl_pass0_src1.csv
[Tue Mar 13 07:20:06 2012] fullrun_ccd2_acisf13489_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Mar 13 07:20:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13489_pi14-548_cl_pass0_src1.csv
[Tue Mar 13 07:20:06 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13489_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13489_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 07:20:06 2012] fullrun_ccd2_acisf13489_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 13 07:20:06 2012] fullrun_ccd2_acisf13489_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 13 07:20:06 2012] Fit fullrun_ccd2_acisf13489_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar 13 08:48:48 2012] Spatial fit model total counts = 593.999000, observed total counts = 594.000000
[Tue Mar 13 08:48:48 2012] Offset between fit and detection position for source 1 = 0.576591 pixels
[Tue Mar 13 08:48:48 2012] 594.201000 total counts/ 48.634000 bgd. counts: snr = 78.230859
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.576591 pixels
  Position = (707.1, 1246.6) = 1 55 42.42 -55 44 1.7
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 545.6 +/- 24.4
  Background counts = 48.6
  Rate = 0.007 +/- 0.0003
[Tue Mar 13 08:48:48 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 08:48:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 08:48:48 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 08:48:48 2012] Source does appear to be extended
[Tue Mar 13 08:48:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 09:52:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 09:52:35 2012] Initial guess for spatial extent in simple fitting = 0.43"
[Tue Mar 13 09:52:35 2012] source mask rpix=0.9, npix_max = 7, mask sum = 3, frac = 0.401
[Tue Mar 13 09:52:35 2012] Skipping simple spatial due to low active detector fraction
[Tue Mar 13 11:54:16 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:54:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:54:16 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:54:16 2012] Source does appear to be extended
[Tue Mar 13 11:54:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 12:06:55 2012] Writing source region out to fullrun_ccd2_acisf13489_pi14-548_pass1_cl_src1_src.reg
[Tue Mar 13 12:06:55 2012] Extracting stamp from image fullrun_ccd2_acisf13489_pi14-548_cl_sm2.00.img.gz, (688, 1227) - (727, 1266)
[Tue Mar 13 12:06:55 2012] Writing fullrun_ccd2_acisf13489_pi14-548_pass1_cl_src1.gif
[Tue Mar 13 12:06:58 2012] Size of ../../acisf13489/products/events/fullrun_ccd2_acisf13489_pi14-548_pass1_cl_src1_src.evt.gz[events] = 562 counts
[Tue Mar 13 12:06:58 2012] Mean chipx,y = (194.72, 951.74)
[Tue Mar 13 12:06:58 2012] Mean tdetx,y = (4012.74, 3891.28)
[Tue Mar 13 12:06:58 2012] chipx,y range = (173.00-215.00, 931.00-972.00)
[Tue Mar 13 12:06:58 2012] Size of ../../acisf13489/products/events/fullrun_ccd2_acisf13489_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 19 counts
[Tue Mar 13 12:07:00 2012] rmf not found, will run specextract
[Tue Mar 13 12:07:00 2012] arf not found, will run specextract
[Tue Mar 13 12:07:31 2012] ../../acisf13489/products/spectra/fullrun_ccd2_acisf13489_pi14-548_pass1_cl_src1.warf not found
[Tue Mar 13 12:07:31 2012] ../../acisf13489/products/spectra/fullrun_ccd2_acisf13489_pi14-548_pass1_cl_src1.wrmf not found
[Tue Mar 13 12:07:31 2012] Removal of ../../acisf13489/products/spectra/fullrun_ccd2_acisf13489_pi14-548_pass1_cl_src1.soff failed
[Tue Mar 13 12:34:46 2012] Keeping rmf generated by specextract
[Tue Mar 13 12:34:46 2012] 198.055
[Tue Mar 13 13:02:11 2012] Updating aperture counts using extracted products
[Tue Mar 13 13:02:11 2012] Error reading totcts from fullrun_ccd2_acisf13489_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Mar 13 13:02:11 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 13:02:11 2012] Using photon index=1.80, rate=0.00703, arf fullrun_ccd2_acisf13489_pi14-548_pass1_cl_src1.arf
[Tue Mar 13 13:02:11 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Mar 13 13:02:11 2012] Updating source flux to 8.2e-14
[Tue Mar 13 13:02:48 2012] Reading fit data from acisf13489/analysis//spectral/fullrun_ccd2_acisf13489_pi14-548_pass1_cl_src1_pl.csv
[Tue Mar 13 13:02:48 2012] Spectral fit parameter nH value = 3.90019e+20
[Tue Mar 13 13:02:48 2012] Spectral fit parameter PhoIndex value = 1.63023
[Tue Mar 13 13:02:48 2012] Failed to get F(0.3-8.0) from acisf13489/analysis//spectral/fullrun_ccd2_acisf13489_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Mar 13 13:02:48 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 13:02:48 2012] Using Nh = 3.9e+20, photon index=1.63, rate=0.00703, arf fullrun_ccd2_acisf13489_pi14-548_pass1_cl_src1.arf
[Tue Mar 13 13:02:48 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Mar 13 13:02:48 2012] Updating source flux to 8.6e-14