[Wed Mar  7 21:18:47 2012] Detection parameters:
  Position = (368.7, 500.8) = 6 55 57.36 -52 46 21.1
  Extent = 3.9" x 3.4", rotation angle = 142 degrees
  Source counts = 141.8 +/- 13.0
  Background counts = 28.2
  Rate = 0.007 +/- 0.0006

[Wed Mar  7 21:18:47 2012] Off-axis axis estimate = 9.76'
[Wed Mar  7 21:22:47 2012] Using EEF radius (= 4.22 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 21:22:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar  7 21:22:47 2012] Initial guess for spatial extent in simple fitting = 4.22"
[Wed Mar  7 21:22:47 2012] source mask rpix=8.6, npix_max = 329, mask sum = 324, frac = 0.983
[Wed Mar  7 21:22:47 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 4.22"
[Wed Mar  7 21:28:44 2012] fullrun_ccd0_acisf13486_pi14-548_cl_pass0_src1.ximg exists
[Wed Mar  7 21:28:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13486_pi14-548_cl_pass0_src1.csv
[Wed Mar  7 21:28:44 2012] fullrun_ccd0_acisf13486_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Mar  7 21:28:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13486_pi14-548_cl_pass0_src1.csv
[Wed Mar  7 21:28:44 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13486_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13486_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 21:28:44 2012] fullrun_ccd0_acisf13486_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar  7 21:28:44 2012] fullrun_ccd0_acisf13486_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar  7 21:28:44 2012] Fit fullrun_ccd0_acisf13486_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Mar  7 22:12:59 2012] Spatial fit model total counts = 178.939000, observed total counts = 179.000000
[Wed Mar  7 22:12:59 2012] Offset between fit and detection position for source 1 = 0.180331 pixels
[Wed Mar  7 22:12:59 2012] 178.959300 total counts/ 23.217300 bgd. counts: snr = 32.322124
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.180331 pixels
  Position = (368.7, 501.0) = 6 55 57.38 -52 46 21.3
  Extent = 4.5 (3.9-5.2)", rotation angle = 0
  Source counts = 155.7 +/- 13.4
  Background counts = 23.2
  Rate = 0.008 +/- 0.0007
[Wed Mar  7 22:12:59 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 22:12:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 22:12:59 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 22:12:59 2012] Source does appear to be extended
[Wed Mar  7 22:12:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 22:13:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar  7 22:13:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar  7 22:13:14 2012] Initial guess for spatial extent in simple fitting = 4.52"
[Wed Mar  7 22:13:14 2012] source mask rpix=9.2, npix_max = 374, mask sum = 380, frac = 1.014
[Wed Mar  7 22:13:14 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.52"
[Wed Mar  7 22:19:46 2012] fullrun_ccd0_acisf13486_pi14-548_cl_pass1_src1.ximg exists
[Wed Mar  7 22:19:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13486_pi14-548_cl_pass1_src1.csv
[Wed Mar  7 22:19:46 2012] fullrun_ccd0_acisf13486_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Mar  7 22:19:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13486_pi14-548_cl_pass1_src1.csv
[Wed Mar  7 22:19:46 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13486_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13486_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 22:19:46 2012] fullrun_ccd0_acisf13486_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar  7 22:19:46 2012] fullrun_ccd0_acisf13486_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar  7 22:19:46 2012] Fit fullrun_ccd0_acisf13486_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Mar  7 23:02:59 2012] Warning, spatial fit 1 centroid is now closest to src. 2
[Wed Mar  7 23:02:59 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 23:02:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 23:02:59 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 23:02:59 2012] Source does appear to be extended
[Wed Mar  7 23:02:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 23:03:15 2012] Writing source region out to fullrun_ccd0_acisf13486_pi14-548_pass1_cl_src1_src.reg
[Wed Mar  7 23:03:15 2012] Extracting stamp from image fullrun_ccd0_acisf13486_pi14-548_cl_sm2.00.img.gz, (162, 294) - (575, 708)
[Wed Mar  7 23:03:15 2012] Writing fullrun_ccd0_acisf13486_pi14-548_pass1_cl_src1.gif
[Wed Mar  7 23:03:16 2012] Size of ../../acisf13486/products/events/fullrun_ccd0_acisf13486_pi14-548_pass1_cl_src1_src.evt.gz[events] = 180 counts
[Wed Mar  7 23:03:16 2012] Mean chipx,y = (663.66, 142.77)
[Wed Mar  7 23:03:16 2012] Mean tdetx,y = (3203.77, 4468.34)
[Wed Mar  7 23:03:16 2012] chipx,y range = (619.00-705.00, 101.00-184.00)
[Wed Mar  7 23:03:16 2012] Size of ../../acisf13486/products/events/fullrun_ccd0_acisf13486_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 223 counts
[Wed Mar  7 23:03:18 2012] rmf not found, will run specextract
[Wed Mar  7 23:03:18 2012] arf not found, will run specextract
[Wed Mar  7 23:03:33 2012] ../../acisf13486/products/spectra/fullrun_ccd0_acisf13486_pi14-548_pass1_cl_src1.warf not found
[Wed Mar  7 23:03:33 2012] ../../acisf13486/products/spectra/fullrun_ccd0_acisf13486_pi14-548_pass1_cl_src1.wrmf not found
[Wed Mar  7 23:03:33 2012] Removal of ../../acisf13486/products/spectra/fullrun_ccd0_acisf13486_pi14-548_pass1_cl_src1.soff failed
[Wed Mar  7 23:06:07 2012] Keeping rmf generated by specextract
[Wed Mar  7 23:06:07 2012] 148.075
[Wed Mar  7 23:22:38 2012] Updating aperture counts using extracted products
[Wed Mar  7 23:22:38 2012] Error reading totcts from fullrun_ccd0_acisf13486_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Mar  7 23:22:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 23:22:38 2012] Using photon index=1.80, rate=0.00771, arf fullrun_ccd0_acisf13486_pi14-548_pass1_cl_src1.arf
[Wed Mar  7 23:22:38 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Mar  7 23:22:38 2012] Updating source flux to 1.2e-13
[Wed Mar  7 23:22:45 2012] Reading fit data from acisf13486/analysis//spectral/fullrun_ccd0_acisf13486_pi14-548_pass1_cl_src1_pl.csv
[Wed Mar  7 23:22:45 2012] Spectral fit parameter nH value = 7.80814e+12
[Wed Mar  7 23:22:45 2012] Spectral fit parameter PhoIndex value = 2.38471
[Wed Mar  7 23:22:45 2012] Failed to get F(0.3-8.0) from acisf13486/analysis//spectral/fullrun_ccd0_acisf13486_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Mar  7 23:22:45 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 23:22:45 2012] Using Nh = 7.8e+12, photon index=2.38, rate=0.00771, arf fullrun_ccd0_acisf13486_pi14-548_pass1_cl_src1.arf
[Wed Mar  7 23:22:45 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Mar  7 23:22:45 2012] Updating source flux to 1.3e-13