[Wed Feb 29 16:35:55 2012] Detection parameters:
  Position = (588.7, 321.6) = 1 2 54.63 -46 6 57.9
  Extent = 0.5" x 0.5", rotation angle = 27 degrees
  Source counts = 379.0 +/- 19.6
  Background counts = 4.0
  Rate = 0.006 +/- 0.0003

[Wed Feb 29 16:35:55 2012] Off-axis axis estimate = 4.20'
[Wed Feb 29 17:58:29 2012] Using EEF radius (= 0.89 ")to estimate initial spatial extent for simple fitting
[Wed Feb 29 17:58:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 29 17:58:29 2012] Initial guess for spatial extent in simple fitting = 0.89"
[Wed Feb 29 17:58:29 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.936
[Wed Feb 29 17:58:29 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.89"
[Wed Feb 29 18:25:17 2012] fullrun_ccd3_acisf13485_pi14-548_cl_pass0_src1.ximg exists
[Wed Feb 29 18:25:17 2012] fullrun_ccd3_acisf13485_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Feb 29 18:25:17 2012] Fit fullrun_ccd3_acisf13485_pi14-548_cl_pass0_src1 appears to have run properly
[Wed Feb 29 18:25:17 2012] fullrun_ccd3_acisf13485_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Feb 29 18:25:17 2012] fullrun_ccd3_acisf13485_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Feb 29 18:25:17 2012] Fit fullrun_ccd3_acisf13485_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Feb 29 19:07:23 2012] Spatial fit model total counts = 403.308000, observed total counts = 402.000000
[Wed Feb 29 19:07:23 2012] Offset between fit and detection position for source 3 = 0.773471 pixels
[Wed Feb 29 19:07:23 2012] 404.431300 total counts/ 27.447300 bgd. counts: snr = 71.957009
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.773471 pixels
  Position = (589.2, 322.1) = 1 2 54.63 -46 6 57.9
  Extent = 0.7 (0.7-0.8)", rotation angle = 0
  Source counts = 377.0 +/- 20.1
  Background counts = 27.4
  Rate = 0.006 +/- 0.0003
[Wed Feb 29 19:07:23 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 19:07:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 19:07:23 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 19:07:23 2012] Source does appear to be extended
[Wed Feb 29 19:07:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 20:28:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 29 20:28:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 29 20:28:54 2012] Initial guess for spatial extent in simple fitting = 0.71"
[Wed Feb 29 20:28:54 2012] source mask rpix=1.4, npix_max = 15, mask sum = 14, frac = 0.923
[Wed Feb 29 20:28:54 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.71"
[Wed Feb 29 20:54:22 2012] fullrun_ccd3_acisf13485_pi14-548_cl_pass1_src1.ximg exists
[Wed Feb 29 20:54:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13485_pi14-548_cl_pass1_src1.csv
[Wed Feb 29 20:54:22 2012] fullrun_ccd3_acisf13485_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Feb 29 20:54:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13485_pi14-548_cl_pass1_src1.csv
[Wed Feb 29 20:54:22 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13485_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13485_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 20:54:23 2012] fullrun_ccd3_acisf13485_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Feb 29 20:54:23 2012] fullrun_ccd3_acisf13485_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Feb 29 20:54:23 2012] Fit fullrun_ccd3_acisf13485_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Feb 29 21:41:16 2012] Spatial fit model total counts = 403.365000, observed total counts = 403.000000
[Wed Feb 29 21:41:16 2012] Offset between fit and detection position for source 3 = 0.001579 pixels
[Wed Feb 29 21:41:16 2012] 404.225300 total counts/ 27.091300 bgd. counts: snr = 72.457069
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.001579 pixels
  Position = (589.2, 322.1) = 1 2 54.63 -46 6 57.9
  Extent = 0.7 (0.7-0.8)", rotation angle = 0
  Source counts = 377.1 +/- 20.1
  Background counts = 27.1
  Rate = 0.006 +/- 0.0003
[Wed Feb 29 21:41:16 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 21:41:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 21:41:16 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 21:41:16 2012] Source does appear to be extended
[Wed Feb 29 21:41:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 22:08:42 2012] Writing source region out to fullrun_ccd3_acisf13485_pi14-548_pass1_cl_src3_src.reg
[Wed Feb 29 22:08:42 2012] Extracting stamp from image fullrun_ccd3_acisf13485_pi14-548_cl_sm2.00.img.gz, (557, 289) - (622, 355)
[Wed Feb 29 22:08:42 2012] Writing fullrun_ccd3_acisf13485_pi14-548_pass1_cl_src3.gif
[Wed Feb 29 22:08:44 2012] Size of ../../acisf13485/products/events/fullrun_ccd3_acisf13485_pi14-548_pass1_cl_src3_src.evt.gz[events] = 392 counts
[Wed Feb 29 22:08:44 2012] Mean chipx,y = (183.98, 763.06)
[Wed Feb 29 22:08:44 2012] Mean tdetx,y = (4368.94, 3244.98)
[Wed Feb 29 22:08:44 2012] chipx,y range = (164.00-201.00, 742.00-784.00)
[Wed Feb 29 22:08:44 2012] Size of ../../acisf13485/products/events/fullrun_ccd3_acisf13485_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 16 counts
[Wed Feb 29 22:08:45 2012] rmf not found, will run specextract
[Wed Feb 29 22:08:45 2012] arf not found, will run specextract
[Wed Feb 29 22:09:11 2012] ../../acisf13485/products/spectra/fullrun_ccd3_acisf13485_pi14-548_pass1_cl_src3.warf not found
[Wed Feb 29 22:09:11 2012] ../../acisf13485/products/spectra/fullrun_ccd3_acisf13485_pi14-548_pass1_cl_src3.wrmf not found
[Wed Feb 29 22:09:11 2012] Removal of ../../acisf13485/products/spectra/fullrun_ccd3_acisf13485_pi14-548_pass1_cl_src3.soff failed
[Wed Feb 29 22:22:22 2012] Keeping rmf generated by specextract
[Wed Feb 29 22:22:22 2012] 180.91
[Wed Feb 29 22:27:51 2012] Updating aperture counts using extracted products
[Wed Feb 29 22:27:51 2012] Error reading totcts from fullrun_ccd3_acisf13485_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Feb 29 22:27:51 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 29 22:27:51 2012] Using photon index=1.80, rate=0.00621, arf fullrun_ccd3_acisf13485_pi14-548_pass1_cl_src3.arf
[Wed Feb 29 22:27:51 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 29 22:27:51 2012] Updating source flux to 8.4e-14
[Wed Feb 29 22:28:14 2012] Reading fit data from acisf13485/analysis//spectral/fullrun_ccd3_acisf13485_pi14-548_pass1_cl_src3_pl.csv
[Wed Feb 29 22:28:14 2012] Spectral fit parameter nH value = 7.37684e+20
[Wed Feb 29 22:28:14 2012] Spectral fit parameter PhoIndex value = 1.67843
[Wed Feb 29 22:28:14 2012] Failed to get F(0.3-8.0) from acisf13485/analysis//spectral/fullrun_ccd3_acisf13485_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Feb 29 22:28:14 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 29 22:28:14 2012] Using Nh = 7.4e+20, photon index=1.68, rate=0.00621, arf fullrun_ccd3_acisf13485_pi14-548_pass1_cl_src3.arf
[Wed Feb 29 22:28:14 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 29 22:28:14 2012] Updating source flux to 8.3e-14