[Wed Feb 29 16:35:21 2012] Detection parameters:
  Position = (1077.1, 1035.8) = 1 2 2.98 -46 7 57.8
  Extent = 0.7" x 0.5", rotation angle = 163 degrees
  Source counts = 43.0 +/- 6.9
  Background counts = 4.0
  Rate = 0.0007 +/- 0.0001

[Wed Feb 29 16:35:21 2012] Off-axis axis estimate = 4.95'
[Wed Feb 29 17:36:38 2012] Using EEF radius (= 1.16 ")to estimate initial spatial extent for simple fitting
[Wed Feb 29 17:36:38 2012] Initial guess for spatial extent in simple fitting = 1.16"
[Wed Feb 29 17:36:38 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.104
[Wed Feb 29 17:36:38 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 1.16"
[Wed Feb 29 17:58:29 2012] fullrun_ccd2_acisf13485_pi14-548_cl_pass0_src7.ximg exists
[Wed Feb 29 17:58:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13485_pi14-548_cl_pass0_src7.csv
[Wed Feb 29 17:58:29 2012] fullrun_ccd2_acisf13485_pi14-548_cl_pass0_src7_1.ximg exists
[Wed Feb 29 17:58:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13485_pi14-548_cl_pass0_src7.csv
[Wed Feb 29 17:58:29 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13485_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13485_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 17:58:29 2012] fullrun_ccd2_acisf13485_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Wed Feb 29 17:58:29 2012] fullrun_ccd2_acisf13485_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Feb 29 17:58:29 2012] Fit fullrun_ccd2_acisf13485_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Feb 29 19:07:20 2012] Spatial fit model total counts = 50.739900, observed total counts = 50.000000
[Wed Feb 29 19:07:20 2012] Offset between fit and detection position for source 11 = 0.344186 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.344186 pixels
  Position = (1077.3, 1036.0) = 1 2 2.99 -46 7 57.9
  Extent = 1.4 (1.0-1.7)", rotation angle = 0
  Source counts = 50.7 +/- 7.1
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0001
[Wed Feb 29 19:07:20 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 19:07:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 19:07:20 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 19:07:20 2012] Source does appear to be extended
[Wed Feb 29 19:07:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 20:04:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 29 20:04:56 2012] Initial guess for spatial extent in simple fitting = 1.42"
[Wed Feb 29 20:04:56 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.921
[Wed Feb 29 20:04:56 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 1.42"
[Wed Feb 29 20:28:53 2012] fullrun_ccd2_acisf13485_pi14-548_cl_pass1_src7.ximg exists
[Wed Feb 29 20:28:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13485_pi14-548_cl_pass1_src7.csv
[Wed Feb 29 20:28:53 2012] fullrun_ccd2_acisf13485_pi14-548_cl_pass1_src7_1.ximg exists
[Wed Feb 29 20:28:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13485_pi14-548_cl_pass1_src7.csv
[Wed Feb 29 20:28:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13485_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13485_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 20:28:54 2012] fullrun_ccd2_acisf13485_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Wed Feb 29 20:28:54 2012] fullrun_ccd2_acisf13485_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Feb 29 20:28:54 2012] Fit fullrun_ccd2_acisf13485_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Feb 29 21:41:13 2012] Spatial fit model total counts = 49.328000, observed total counts = 51.000000
[Wed Feb 29 21:41:13 2012] Offset between fit and detection position for source 11 = 0.079794 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.079794 pixels
  Position = (1077.3, 1036.0) = 1 2 2.99 -46 7 57.9
  Extent = 1.5 (1.0-1.8)", rotation angle = 0
  Source counts = 49.6 +/- 7.0
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0001
[Wed Feb 29 21:41:13 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 21:41:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 21:41:13 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 21:41:13 2012] Source does appear to be extended
[Wed Feb 29 21:41:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 21:55:13 2012] Writing source region out to fullrun_ccd2_acisf13485_pi14-548_pass1_cl_src11_src.reg
[Wed Feb 29 21:55:13 2012] Extracting stamp from image fullrun_ccd2_acisf13485_pi14-548_cl_sm2.00.img.gz, (1009, 968) - (1145, 1104)
[Wed Feb 29 21:55:13 2012] Writing fullrun_ccd2_acisf13485_pi14-548_pass1_cl_src11.gif
[Wed Feb 29 21:58:39 2012] Size of ../../acisf13485/products/events/fullrun_ccd2_acisf13485_pi14-548_pass1_cl_src11_src.evt.gz[events] = 55 counts
[Wed Feb 29 21:58:39 2012] Mean chipx,y = (19.07, 575.13)
[Wed Feb 29 21:58:39 2012] Mean tdetx,y = (3636.13, 4066.93)
[Wed Feb 29 21:58:39 2012] chipx,y range = (3.00-39.00, 557.00-598.00)
[Wed Feb 29 21:58:39 2012] Size of ../../acisf13485/products/events/fullrun_ccd2_acisf13485_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 62 counts
[Wed Feb 29 21:58:40 2012] Not generating rmf since there are only 49 counts
[Wed Feb 29 21:58:40 2012] arf not found, will run specextract
[Wed Feb 29 21:59:06 2012] ../../acisf13485/products/spectra/fullrun_ccd2_acisf13485_pi14-548_pass1_cl_src11.warf not found
[Wed Feb 29 21:59:06 2012] ../../acisf13485/products/spectra/fullrun_ccd2_acisf13485_pi14-548_pass1_cl_src11.wrmf not found
[Wed Feb 29 21:59:06 2012] Removal of ../../acisf13485/products/spectra/fullrun_ccd2_acisf13485_pi14-548_pass1_cl_src11.soff failed
[Wed Feb 29 22:08:42 2012] Spectrum 11 has only 50 counts, deleting rmf
[Wed Feb 29 22:08:42 2012] 159.555
[Wed Feb 29 22:27:51 2012] Updating aperture counts using extracted products
[Wed Feb 29 22:27:51 2012] Error reading totcts from fullrun_ccd2_acisf13485_pi14-548_pass1_cl_src11_src.pi.gz
[Wed Feb 29 22:27:51 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 29 22:27:51 2012] Using photon index=1.80, rate=0.000817, arf fullrun_ccd2_acisf13485_pi14-548_pass1_cl_src11.arf
[Wed Feb 29 22:27:51 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 29 22:27:51 2012] Updating source flux to 1.2e-14
[Wed Feb 29 22:28:00 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Feb 29 22:28:01 2012] acisf13485/analysis//spectral/fullrun_ccd2_acisf13485_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete