[Wed Feb 29 16:35:21 2012] Detection parameters:
  Position = (455.7, 1015.7) = 1 2 32.39 -46 8 7.9
  Extent = 0.5" x 0.5", rotation angle = 75 degrees
  Source counts = 58.0 +/- 7.7
  Background counts = 1.0
  Rate = 0.001 +/- 0.0001

[Wed Feb 29 16:35:21 2012] Off-axis axis estimate = 1.53'
[Wed Feb 29 17:36:38 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Wed Feb 29 17:36:38 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Wed Feb 29 17:36:38 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.329
[Wed Feb 29 17:36:38 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 0.39"
[Wed Feb 29 17:58:29 2012] fullrun_ccd2_acisf13485_pi14-548_cl_pass0_src5.ximg exists
[Wed Feb 29 17:58:29 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf13485_pi14-548_cl_pass0_src5.csv
[Wed Feb 29 17:58:29 2012] fullrun_ccd2_acisf13485_pi14-548_cl_pass0_src5_1.ximg exists
[Wed Feb 29 17:58:29 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf13485_pi14-548_cl_pass0_src5.csv
[Wed Feb 29 17:58:29 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13485_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13485_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 17:58:29 2012] fullrun_ccd2_acisf13485_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Wed Feb 29 17:58:29 2012] fullrun_ccd2_acisf13485_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Feb 29 17:58:29 2012] Fit fullrun_ccd2_acisf13485_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Feb 29 19:07:20 2012] Spatial fit model total counts = 58.990600, observed total counts = 60.000000
[Wed Feb 29 19:07:20 2012] Offset between fit and detection position for source 10 = 0.739158 pixels
[Wed Feb 29 19:07:20 2012] 58.915380 total counts/ 3.906680 bgd. counts: snr = 27.830914
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.739158 pixels
  Position = (456.2, 1016.2) = 1 2 32.39 -46 8 7.8
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 55.0 +/- 7.7
  Background counts = 3.9
  Rate = 0.0009 +/- 0.0001
[Wed Feb 29 19:07:20 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 19:07:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 19:07:20 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 19:07:20 2012] Source does appear to be extended
[Wed Feb 29 19:07:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 20:04:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 29 20:04:56 2012] Initial guess for spatial extent in simple fitting = 0.48"
[Wed Feb 29 20:04:56 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.045
[Wed Feb 29 20:04:56 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 0.48"
[Wed Feb 29 20:28:53 2012] fullrun_ccd2_acisf13485_pi14-548_cl_pass1_src5.ximg exists
[Wed Feb 29 20:28:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13485_pi14-548_cl_pass1_src5.csv
[Wed Feb 29 20:28:53 2012] fullrun_ccd2_acisf13485_pi14-548_cl_pass1_src5_1.ximg exists
[Wed Feb 29 20:28:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13485_pi14-548_cl_pass1_src5.csv
[Wed Feb 29 20:28:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13485_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13485_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 20:28:54 2012] fullrun_ccd2_acisf13485_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Wed Feb 29 20:28:54 2012] fullrun_ccd2_acisf13485_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Feb 29 20:28:54 2012] Fit fullrun_ccd2_acisf13485_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Feb 29 21:41:13 2012] Spatial fit model total counts = 58.399400, observed total counts = 60.000000
[Wed Feb 29 21:41:13 2012] Offset between fit and detection position for source 10 = 0.015796 pixels
[Wed Feb 29 21:41:13 2012] 58.308660 total counts/ 3.322460 bgd. counts: snr = 30.166424
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.015796 pixels
  Position = (456.2, 1016.2) = 1 2 32.39 -46 8 7.8
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 55.0 +/- 7.6
  Background counts = 3.3
  Rate = 0.0009 +/- 0.0001
[Wed Feb 29 21:41:13 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 21:41:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 21:41:13 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 21:41:13 2012] Source does appear to be extended
[Wed Feb 29 21:41:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 21:55:13 2012] Writing source region out to fullrun_ccd2_acisf13485_pi14-548_pass1_cl_src10_src.reg
[Wed Feb 29 21:55:13 2012] Extracting stamp from image fullrun_ccd2_acisf13485_pi14-548_cl_sm2.00.img.gz, (434, 994) - (478, 1038)
[Wed Feb 29 21:55:13 2012] Writing fullrun_ccd2_acisf13485_pi14-548_pass1_cl_src10.gif
[Wed Feb 29 21:57:35 2012] Size of ../../acisf13485/products/events/fullrun_ccd2_acisf13485_pi14-548_pass1_cl_src10_src.evt.gz[events] = 57 counts
[Wed Feb 29 21:57:35 2012] Mean chipx,y = (536.35, 919.12)
[Wed Feb 29 21:57:35 2012] Mean tdetx,y = (3980.12, 3549.65)
[Wed Feb 29 21:57:35 2012] chipx,y range = (521.00-556.00, 900.00-934.00)
[Wed Feb 29 21:57:35 2012] Size of ../../acisf13485/products/events/fullrun_ccd2_acisf13485_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 4 counts
[Wed Feb 29 21:57:36 2012] Not generating rmf since there are only 54 counts
[Wed Feb 29 21:57:36 2012] arf not found, will run specextract
[Wed Feb 29 21:58:07 2012] ../../acisf13485/products/spectra/fullrun_ccd2_acisf13485_pi14-548_pass1_cl_src10.warf not found
[Wed Feb 29 21:58:07 2012] ../../acisf13485/products/spectra/fullrun_ccd2_acisf13485_pi14-548_pass1_cl_src10.wrmf not found
[Wed Feb 29 21:58:07 2012] Removal of ../../acisf13485/products/spectra/fullrun_ccd2_acisf13485_pi14-548_pass1_cl_src10.soff failed
[Wed Feb 29 22:08:42 2012] Spectrum 10 has only 55 counts, deleting rmf
[Wed Feb 29 22:08:42 2012] 182.891
[Wed Feb 29 22:27:51 2012] Updating aperture counts using extracted products
[Wed Feb 29 22:27:51 2012] Error reading totcts from fullrun_ccd2_acisf13485_pi14-548_pass1_cl_src10_src.pi.gz
[Wed Feb 29 22:27:51 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 29 22:27:51 2012] Using photon index=1.80, rate=0.000906, arf fullrun_ccd2_acisf13485_pi14-548_pass1_cl_src10.arf
[Wed Feb 29 22:27:51 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 29 22:27:51 2012] Updating source flux to 1.2e-14
[Wed Feb 29 22:28:00 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Feb 29 22:28:01 2012] acisf13485/analysis//spectral/fullrun_ccd2_acisf13485_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete