[Wed Feb 29 16:34:45 2012] Detection parameters:
  Position = (744.9, 629.6) = 1 2 6.22 -45 59 33.1
  Extent = 2.2" x 1.4", rotation angle = 1 degrees
  Source counts = 43.0 +/- 7.1
  Background counts = 7.0
  Rate = 0.0007 +/- 0.0001

[Wed Feb 29 16:34:45 2012] Off-axis axis estimate = 8.24'
[Wed Feb 29 17:00:35 2012] Using EEF radius (= 3.00 ")to estimate initial spatial extent for simple fitting
[Wed Feb 29 17:00:35 2012] Initial guess for spatial extent in simple fitting = 3.00"
[Wed Feb 29 17:00:35 2012] source mask rpix=6.1, npix_max = 174, mask sum = 182, frac = 1.045
[Wed Feb 29 17:00:35 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 3.00"
[Wed Feb 29 17:36:38 2012] fullrun_ccd1_acisf13485_pi14-548_cl_pass0_src8.ximg exists
[Wed Feb 29 17:36:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13485_pi14-548_cl_pass0_src8.csv
[Wed Feb 29 17:36:38 2012] fullrun_ccd1_acisf13485_pi14-548_cl_pass0_src8_1.ximg exists
[Wed Feb 29 17:36:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13485_pi14-548_cl_pass0_src8.csv
[Wed Feb 29 17:36:38 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13485_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13485_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 17:36:38 2012] fullrun_ccd1_acisf13485_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Wed Feb 29 17:36:38 2012] fullrun_ccd1_acisf13485_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Wed Feb 29 17:36:38 2012] Fit fullrun_ccd1_acisf13485_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Wed Feb 29 19:07:18 2012] Spatial fit model total counts = 69.521500, observed total counts = 70.000000
[Wed Feb 29 19:07:18 2012] Offset between fit and detection position for source 6 = 0.562268 pixels
[Wed Feb 29 19:07:18 2012] 70.163840 total counts/ 6.037640 bgd. counts: snr = 26.097680
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.562268 pixels
  Position = (744.6, 629.1) = 1 2 6.26 -45 59 33.6
  Extent = 3.1 (2.4-3.9)", rotation angle = 0
  Source counts = 64.1 +/- 8.4
  Background counts = 6.0
  Rate = 0.001 +/- 0.0001
[Wed Feb 29 19:07:18 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 19:07:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 19:07:18 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 19:07:18 2012] Source does appear to be extended
[Wed Feb 29 19:07:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 19:30:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 29 19:30:20 2012] Initial guess for spatial extent in simple fitting = 3.12"
[Wed Feb 29 19:30:20 2012] source mask rpix=6.3, npix_max = 187, mask sum = 182, frac = 0.970
[Wed Feb 29 19:30:20 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 3.12"
[Wed Feb 29 20:04:56 2012] fullrun_ccd1_acisf13485_pi14-548_cl_pass1_src8.ximg exists
[Wed Feb 29 20:04:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13485_pi14-548_cl_pass1_src8.csv
[Wed Feb 29 20:04:56 2012] fullrun_ccd1_acisf13485_pi14-548_cl_pass1_src8_1.ximg exists
[Wed Feb 29 20:04:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13485_pi14-548_cl_pass1_src8.csv
[Wed Feb 29 20:04:56 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13485_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13485_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 20:04:56 2012] fullrun_ccd1_acisf13485_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Wed Feb 29 20:04:56 2012] fullrun_ccd1_acisf13485_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Wed Feb 29 20:04:56 2012] Fit fullrun_ccd1_acisf13485_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Wed Feb 29 21:41:11 2012] Warning, spatial fit 8 centroid is now closest to src. 15
[Wed Feb 29 21:41:11 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 21:41:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 21:41:11 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 21:41:11 2012] Source does appear to be extended
[Wed Feb 29 21:41:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 21:46:10 2012] Writing source region out to fullrun_ccd1_acisf13485_pi14-548_pass1_cl_src6_src.reg
[Wed Feb 29 21:46:10 2012] Extracting stamp from image fullrun_ccd1_acisf13485_pi14-548_cl_sm2.00.img.gz, (602, 486) - (887, 772)
[Wed Feb 29 21:46:10 2012] Writing fullrun_ccd1_acisf13485_pi14-548_pass1_cl_src6.gif
[Wed Feb 29 21:49:24 2012] Size of ../../acisf13485/products/events/fullrun_ccd1_acisf13485_pi14-548_pass1_cl_src6_src.evt.gz[events] = 76 counts
[Wed Feb 29 21:49:24 2012] Mean chipx,y = (496.43, 613.33)
[Wed Feb 29 21:49:24 2012] Mean tdetx,y = (4518.67, 4603.43)
[Wed Feb 29 21:49:24 2012] chipx,y range = (470.00-529.00, 579.00-641.00)
[Wed Feb 29 21:49:24 2012] Size of ../../acisf13485/products/events/fullrun_ccd1_acisf13485_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 257 counts
[Wed Feb 29 21:49:25 2012] Not generating rmf since there are only 64 counts
[Wed Feb 29 21:49:25 2012] arf not found, will run specextract
[Wed Feb 29 21:49:49 2012] ../../acisf13485/products/spectra/fullrun_ccd1_acisf13485_pi14-548_pass1_cl_src6.warf not found
[Wed Feb 29 21:49:49 2012] ../../acisf13485/products/spectra/fullrun_ccd1_acisf13485_pi14-548_pass1_cl_src6.wrmf not found
[Wed Feb 29 21:49:49 2012] Removal of ../../acisf13485/products/spectra/fullrun_ccd1_acisf13485_pi14-548_pass1_cl_src6.soff failed
[Wed Feb 29 21:55:13 2012] Spectrum 6 has only 64 counts, deleting rmf
[Wed Feb 29 21:55:13 2012] 174.207
[Wed Feb 29 22:27:50 2012] Updating aperture counts using extracted products
[Wed Feb 29 22:27:50 2012] Error reading totcts from fullrun_ccd1_acisf13485_pi14-548_pass1_cl_src6_src.pi.gz
[Wed Feb 29 22:27:51 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 29 22:27:51 2012] Using photon index=1.80, rate=0.00106, arf fullrun_ccd1_acisf13485_pi14-548_pass1_cl_src6.arf
[Wed Feb 29 22:27:51 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 29 22:27:51 2012] Updating source flux to 1.4e-14
[Wed Feb 29 22:27:57 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting