[Wed Feb 29 16:34:45 2012] Detection parameters:
  Position = (361.5, 448.6) = 1 2 24.32 -46 1 2.3
  Extent = 1.4" x 0.7", rotation angle = 46 degrees
  Source counts = 27.6 +/- 5.5
  Background counts = 2.4
  Rate = 0.0005 +/- 9e-05

[Wed Feb 29 16:34:45 2012] Off-axis axis estimate = 5.70'
[Wed Feb 29 17:00:35 2012] Using EEF radius (= 1.48 ")to estimate initial spatial extent for simple fitting
[Wed Feb 29 17:00:35 2012] Initial guess for spatial extent in simple fitting = 1.48"
[Wed Feb 29 17:00:35 2012] source mask rpix=3.0, npix_max = 49, mask sum = 40, frac = 0.809
[Wed Feb 29 17:00:35 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 1.48"
[Wed Feb 29 17:36:38 2012] fullrun_ccd1_acisf13485_pi14-548_cl_pass0_src13.ximg exists
[Wed Feb 29 17:36:38 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf13485_pi14-548_cl_pass0_src13.csv
[Wed Feb 29 17:36:38 2012] fullrun_ccd1_acisf13485_pi14-548_cl_pass0_src13_1.ximg exists
[Wed Feb 29 17:36:38 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf13485_pi14-548_cl_pass0_src13.csv
[Wed Feb 29 17:36:38 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13485_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13485_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 17:36:38 2012] fullrun_ccd1_acisf13485_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Wed Feb 29 17:36:38 2012] fullrun_ccd1_acisf13485_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Wed Feb 29 17:36:38 2012] Fit fullrun_ccd1_acisf13485_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Wed Feb 29 19:07:18 2012] Spatial fit model total counts = 37.975500, observed total counts = 38.000000
[Wed Feb 29 19:07:18 2012] Offset between fit and detection position for source 14 = 0.638079 pixels
[Wed Feb 29 19:07:18 2012] 38.109820 total counts/ 5.159320 bgd. counts: snr = 14.506605
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.638079 pixels
  Position = (361.4, 449.2) = 1 2 24.35 -46 1 2.3
  Extent = 1.5 (1.0-2.0)", rotation angle = 0
  Source counts = 33.0 +/- 6.2
  Background counts = 5.2
  Rate = 0.0005 +/- 0.0001
[Wed Feb 29 19:07:18 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 19:07:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 19:07:18 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 19:07:18 2012] Source does appear to be extended
[Wed Feb 29 19:07:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 19:30:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 29 19:30:20 2012] Initial guess for spatial extent in simple fitting = 1.48"
[Wed Feb 29 19:30:20 2012] source mask rpix=3.0, npix_max = 49, mask sum = 40, frac = 0.813
[Wed Feb 29 19:30:20 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 1.48"
[Wed Feb 29 20:04:56 2012] fullrun_ccd1_acisf13485_pi14-548_cl_pass1_src12.ximg exists
[Wed Feb 29 20:04:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13485_pi14-548_cl_pass1_src12.csv
[Wed Feb 29 20:04:56 2012] fullrun_ccd1_acisf13485_pi14-548_cl_pass1_src12_1.ximg exists
[Wed Feb 29 20:04:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13485_pi14-548_cl_pass1_src12.csv
[Wed Feb 29 20:04:56 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13485_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13485_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 20:04:56 2012] fullrun_ccd1_acisf13485_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Wed Feb 29 20:04:56 2012] fullrun_ccd1_acisf13485_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Wed Feb 29 20:04:56 2012] Fit fullrun_ccd1_acisf13485_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Wed Feb 29 21:41:11 2012] Spatial fit model total counts = 38.686800, observed total counts = 37.000000
[Wed Feb 29 21:41:11 2012] Offset between fit and detection position for source 14 = 0.377798 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.377798 pixels
  Position = (361.7, 449.2) = 1 2 24.33 -46 1 2.3
  Extent = 1.5 (1.2-1.9)", rotation angle = 0
  Source counts = 38.5 +/- 6.2
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Wed Feb 29 21:41:11 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 21:41:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 21:41:11 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 21:41:11 2012] Source does appear to be extended
[Wed Feb 29 21:41:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 21:46:10 2012] Writing source region out to fullrun_ccd1_acisf13485_pi14-548_pass1_cl_src14_src.reg
[Wed Feb 29 21:46:10 2012] Extracting stamp from image fullrun_ccd1_acisf13485_pi14-548_cl_sm2.00.img.gz, (292, 379) - (432, 519)
[Wed Feb 29 21:46:10 2012] Writing fullrun_ccd1_acisf13485_pi14-548_pass1_cl_src14.gif
[Wed Feb 29 21:51:35 2012] Size of ../../acisf13485/products/events/fullrun_ccd1_acisf13485_pi14-548_pass1_cl_src14_src.evt.gz[events] = 40 counts
[Wed Feb 29 21:51:35 2012] Mean chipx,y = (77.78, 542.70)
[Wed Feb 29 21:51:35 2012] Mean tdetx,y = (4589.30, 4184.77)
[Wed Feb 29 21:51:35 2012] chipx,y range = (60.00-100.00, 523.00-566.00)
[Wed Feb 29 21:51:35 2012] Size of ../../acisf13485/products/events/fullrun_ccd1_acisf13485_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 71 counts
[Wed Feb 29 21:51:36 2012] Not generating rmf since there are only 38 counts
[Wed Feb 29 21:51:36 2012] arf not found, will run specextract
[Wed Feb 29 21:51:58 2012] ../../acisf13485/products/spectra/fullrun_ccd1_acisf13485_pi14-548_pass1_cl_src14.warf not found
[Wed Feb 29 21:51:58 2012] ../../acisf13485/products/spectra/fullrun_ccd1_acisf13485_pi14-548_pass1_cl_src14.wrmf not found
[Wed Feb 29 21:51:58 2012] Removal of ../../acisf13485/products/spectra/fullrun_ccd1_acisf13485_pi14-548_pass1_cl_src14.soff failed
[Wed Feb 29 21:55:13 2012] Spectrum 14 has only 39 counts, deleting rmf
[Wed Feb 29 21:55:13 2012] 186.081
[Wed Feb 29 22:27:50 2012] Updating aperture counts using extracted products
[Wed Feb 29 22:27:50 2012] Error reading totcts from fullrun_ccd1_acisf13485_pi14-548_pass1_cl_src14_src.pi.gz
[Wed Feb 29 22:27:51 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 29 22:27:51 2012] Using photon index=1.80, rate=0.000635, arf fullrun_ccd1_acisf13485_pi14-548_pass1_cl_src14.arf
[Wed Feb 29 22:27:51 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 29 22:27:51 2012] Updating source flux to 8e-15
[Wed Feb 29 22:27:57 2012] Source 14 has fewer than 100.000000 counts, skipping spectral fitting