[Sat May 18 15:04:04 2013] Detection parameters:
  Position = (702.5, 546.2) = 2 44 14.61 -59 29 18.9
  Extent = 0.5" x 0.5", rotation angle = 25 degrees
  Source counts = 34.7 +/- 5.9
  Background counts = 0.3
  Rate = 0.001 +/- 0.0002

[Sat May 18 15:04:05 2013] Off-axis axis estimate = 3.17'
[Sat May 18 15:58:28 2013] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Sat May 18 15:58:28 2013] Initial guess for spatial extent in simple fitting = 0.62"
[Sat May 18 15:58:28 2013] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.979
[Sat May 18 15:58:28 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 0.62"
[Sat May 18 16:12:16 2013] fullrun_ccd2_acisf13484_pi14-548_cl_pass0_src5.ximg exists
[Sat May 18 16:12:16 2013] fullrun_ccd2_acisf13484_pi14-548_cl_pass0_src5_1.ximg exists
[Sat May 18 16:12:16 2013] Fit fullrun_ccd2_acisf13484_pi14-548_cl_pass0_src5 appears to have run properly
[Sat May 18 16:12:16 2013] fullrun_ccd2_acisf13484_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sat May 18 16:12:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13484_pi14-548_cl_pass0_tfrozen_src5.csv
[Sat May 18 16:12:16 2013] fullrun_ccd2_acisf13484_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sat May 18 16:12:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13484_pi14-548_cl_pass0_tfrozen_src5.csv
[Sat May 18 16:12:16 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13484_pi14-548_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13484_pi14-548_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 16:43:44 2013] Spatial fit model total counts = 32.461000, observed total counts = 36.000000
[Sat May 18 16:43:44 2013] Offset between fit and detection position for source 4 = 0.696284 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.696284 pixels
  Position = (703.0, 546.7) = 2 44 14.61 -59 29 18.9
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 33.1 +/- 5.8
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Sat May 18 16:43:44 2013] Vigneting correction estimate = 1.000000
[Sat May 18 16:43:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 16:43:44 2013] Assessing source extent using major axis lower bound
[Sat May 18 16:43:44 2013] Source does appear to be extended
[Sat May 18 16:43:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 17:13:38 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 18 17:13:38 2013] Initial guess for spatial extent in simple fitting = 0.60"
[Sat May 18 17:13:38 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.017
[Sat May 18 17:13:38 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 0.60"
[Sat May 18 17:24:36 2013] fullrun_ccd2_acisf13484_pi14-548_cl_pass1_src5.ximg exists
[Sat May 18 17:24:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13484_pi14-548_cl_pass1_src5.csv
[Sat May 18 17:24:36 2013] fullrun_ccd2_acisf13484_pi14-548_cl_pass1_src5_1.ximg exists
[Sat May 18 17:24:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13484_pi14-548_cl_pass1_src5.csv
[Sat May 18 17:24:37 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13484_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13484_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 17:24:37 2013] fullrun_ccd2_acisf13484_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sat May 18 17:24:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13484_pi14-548_cl_pass1_tfrozen_src5.csv
[Sat May 18 17:24:37 2013] fullrun_ccd2_acisf13484_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sat May 18 17:24:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13484_pi14-548_cl_pass1_tfrozen_src5.csv
[Sat May 18 17:24:37 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13484_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13484_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 17:55:06 2013] Spatial fit model total counts = 32.955800, observed total counts = 37.000000
[Sat May 18 17:55:06 2013] Offset between fit and detection position for source 4 = 0.097206 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.097206 pixels
  Position = (702.9, 546.7) = 2 44 14.62 -59 29 18.9
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 33.9 +/- 5.8
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Sat May 18 17:55:06 2013] Vigneting correction estimate = 1.000000
[Sat May 18 17:55:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 17:55:06 2013] Assessing source extent using major axis lower bound
[Sat May 18 17:55:06 2013] Source does appear to be extended
[Sat May 18 17:55:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 18:03:43 2013] Writing source region out to fullrun_ccd2_acisf13484_pi14-548_pass1_cl_src4_src.reg
[Sat May 18 18:03:43 2013] Extracting stamp from image fullrun_ccd2_acisf13484_pi14-548_cl_sm2.00.img.gz, (675, 519) - (731, 575)
[Sat May 18 18:03:43 2013] Writing fullrun_ccd2_acisf13484_pi14-548_pass1_cl_src4.gif
[Sat May 18 18:06:16 2013] Size of ../../acisf13484/products/events/fullrun_ccd2_acisf13484_pi14-548_pass1_cl_src4_src.evt.gz[events] = 35 counts
[Sat May 18 18:06:16 2013] Mean chipx,y = (530.23, 684.43)
[Sat May 18 18:06:16 2013] Mean tdetx,y = (3745.43, 3555.77)
[Sat May 18 18:06:16 2013] chipx,y range = (514.00-546.00, 666.00-703.00)
[Sat May 18 18:06:16 2013] Size of ../../acisf13484/products/events/fullrun_ccd2_acisf13484_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 6 counts
[Sat May 18 18:06:17 2013] Not generating rmf since there are only 33 counts
[Sat May 18 18:06:17 2013] arf not found, will run specextract
[Sat May 18 18:06:45 2013] ../../acisf13484/products/spectra/fullrun_ccd2_acisf13484_pi14-548_pass1_cl_src4.warf not found
[Sat May 18 18:06:45 2013] ../../acisf13484/products/spectra/fullrun_ccd2_acisf13484_pi14-548_pass1_cl_src4.wrmf not found
[Sat May 18 18:06:45 2013] Removal of ../../acisf13484/products/spectra/fullrun_ccd2_acisf13484_pi14-548_pass1_cl_src4.soff failed
[Sat May 18 18:12:44 2013] Spectrum 4 has only 34 counts, deleting rmf
[Sat May 18 18:12:44 2013] 184.286
[Sat May 18 18:25:32 2013] Updating aperture counts using extracted products
[Sat May 18 18:25:32 2013] Total counts from fullrun_ccd2_acisf13484_pi14-548_pass1_cl_src4_src.pi.gz = 35.00
[Sat May 18 18:25:32 2013] Total counts from fullrun_ccd2_acisf13484_pi14-548_pass1_cl_src4_bgd.pi.gz = 6.00
[Sat May 18 18:25:32 2013] Got source and background scale factors 0.000001, 0.000014
[Sat May 18 18:25:32 2013] User source parameters:
  Position = (702.9, 546.7) = 2 44 14.62 -59 29 18.9
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source aperture counts = 34.5 +/- 7.0
  Background aperture counts = 0.5
  Rate = 0.001 +/- 0.0002

[Sat May 18 18:25:34 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 18:25:34 2013] Using photon index=1.80, rate=0.00121, arf fullrun_ccd2_acisf13484_pi14-548_pass1_cl_src4.arf
[Sat May 18 18:25:34 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat May 18 18:25:34 2013] Updating source flux to 1.5e-14
[Sat May 18 18:25:43 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 18 18:25:44 2013] acisf13484/analysis//spectral/fullrun_ccd2_acisf13484_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete