[Sat May 18 15:03:18 2013] Detection parameters:
  Position = (1012.3, 114.2) = 2 43 56.63 -59 41 24.7
  Extent = 2.2" x 1.8", rotation angle = 90 degrees
  Source counts = 10.5 +/- 4.2
  Background counts = 7.5
  Rate = 0.0004 +/- 0.0002

[Sat May 18 15:03:19 2013] Off-axis axis estimate = 10.93'
[Sat May 18 15:06:15 2013] Using EEF radius (= 5.31 ")to estimate initial spatial extent for simple fitting
[Sat May 18 15:06:15 2013] Initial guess for spatial extent in simple fitting = 5.31"
[Sat May 18 15:06:15 2013] source mask rpix=10.8, npix_max = 510, mask sum = 483, frac = 0.946
[Sat May 18 15:06:15 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 5.31"
[Sat May 18 15:43:55 2013] fullrun_ccd0_acisf13484_pi14-548_cl_pass0_src7.ximg exists
[Sat May 18 15:43:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13484_pi14-548_cl_pass0_src7.csv
[Sat May 18 15:43:55 2013] fullrun_ccd0_acisf13484_pi14-548_cl_pass0_src7_1.ximg exists
[Sat May 18 15:43:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13484_pi14-548_cl_pass0_src7.csv
[Sat May 18 15:43:55 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13484_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13484_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 15:43:55 2013] fullrun_ccd0_acisf13484_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Sat May 18 15:43:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13484_pi14-548_cl_pass0_tfrozen_src7.csv
[Sat May 18 15:43:55 2013] fullrun_ccd0_acisf13484_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Sat May 18 15:43:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13484_pi14-548_cl_pass0_tfrozen_src7.csv
[Sat May 18 15:43:55 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13484_pi14-548_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13484_pi14-548_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 16:43:42 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 44.064368 pixels away
[Sat May 18 16:43:42 2013] Vigneting correction estimate = 1.000000
[Sat May 18 16:43:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 16:43:42 2013] Assessing source extent using major
[Sat May 18 16:43:42 2013] Source does appear to be extended
[Sat May 18 16:43:42 2013] Computing asymmetry using major and minor axis, asym = 1.26
[Sat May 18 16:43:42 2013] Deleting source due to low Poisson probability 0.9