[Tue Feb 28 01:50:33 2012] Detection parameters:
  Position = (667.3, 138.8) = 1 51 28.69 -59 57 7.8
  Extent = 0.5" x 0.5", rotation angle = 109 degrees
  Source counts = 35.2 +/- 6.0
  Background counts = 0.8
  Rate = 0.0007 +/- 0.0001

[Tue Feb 28 01:50:33 2012] Off-axis axis estimate = 0.63'
[Tue Feb 28 03:05:51 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Tue Feb 28 03:05:51 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Tue Feb 28 03:05:51 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.361
[Tue Feb 28 03:05:51 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 0.39"
[Tue Feb 28 03:24:57 2012] fullrun_ccd3_acisf13480_pi14-548_cl_pass0_src5.ximg exists
[Tue Feb 28 03:24:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13480_pi14-548_cl_pass0_src5.csv
[Tue Feb 28 03:24:57 2012] fullrun_ccd3_acisf13480_pi14-548_cl_pass0_src5_1.ximg exists
[Tue Feb 28 03:24:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13480_pi14-548_cl_pass0_src5.csv
[Tue Feb 28 03:24:57 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13480_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13480_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 03:24:57 2012] fullrun_ccd3_acisf13480_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Tue Feb 28 03:24:57 2012] fullrun_ccd3_acisf13480_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Feb 28 03:24:57 2012] Fit fullrun_ccd3_acisf13480_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Feb 28 03:43:00 2012] Spatial fit model total counts = 36.047700, observed total counts = 37.000000
[Tue Feb 28 03:43:00 2012] Offset between fit and detection position for source 18 = 0.778256 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.778256 pixels
  Position = (667.7, 139.4) = 1 51 28.69 -59 57 7.7
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 35.8 +/- 6.0
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0001
[Tue Feb 28 03:43:00 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 03:43:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 03:43:00 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 03:43:00 2012] Source does appear to be extended
[Tue Feb 28 03:43:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 04:48:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 28 04:48:30 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Tue Feb 28 04:48:30 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.364
[Tue Feb 28 04:48:30 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 0.39"
[Tue Feb 28 05:04:19 2012] fullrun_ccd3_acisf13480_pi14-548_cl_pass1_src5.ximg exists
[Tue Feb 28 05:04:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13480_pi14-548_cl_pass1_src5.csv
[Tue Feb 28 05:04:19 2012] fullrun_ccd3_acisf13480_pi14-548_cl_pass1_src5_1.ximg exists
[Tue Feb 28 05:04:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13480_pi14-548_cl_pass1_src5.csv
[Tue Feb 28 05:04:19 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13480_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13480_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 05:04:19 2012] fullrun_ccd3_acisf13480_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Tue Feb 28 05:04:19 2012] fullrun_ccd3_acisf13480_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Feb 28 05:04:19 2012] Fit fullrun_ccd3_acisf13480_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Feb 28 05:24:17 2012] Spatial fit model total counts = 36.106400, observed total counts = 37.000000
[Tue Feb 28 05:24:17 2012] Offset between fit and detection position for source 18 = 0.014826 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.014826 pixels
  Position = (667.7, 139.4) = 1 51 28.69 -59 57 7.7
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 35.7 +/- 6.0
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0001
[Tue Feb 28 05:24:17 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 05:24:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 05:24:17 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 05:24:17 2012] Source does appear to be extended
[Tue Feb 28 05:24:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 05:49:11 2012] Writing source region out to fullrun_ccd3_acisf13480_pi14-548_pass1_cl_src18_src.reg
[Tue Feb 28 05:49:11 2012] Extracting stamp from image fullrun_ccd3_acisf13480_pi14-548_cl_sm2.00.img.gz, (650, 121) - (686, 158)
[Tue Feb 28 05:49:11 2012] Writing fullrun_ccd3_acisf13480_pi14-548_pass1_cl_src18.gif
[Tue Feb 28 05:51:36 2012] Size of ../../acisf13480/products/events/fullrun_ccd3_acisf13480_pi14-548_pass1_cl_src18_src.evt.gz[events] = 35 counts
[Tue Feb 28 05:51:36 2012] Mean chipx,y = (698.46, 994.86)
[Tue Feb 28 05:51:36 2012] Mean tdetx,y = (4137.14, 3759.46)
[Tue Feb 28 05:51:36 2012] chipx,y range = (681.00-717.00, 979.00-1013.00)
[Tue Feb 28 05:51:36 2012] Size of ../../acisf13480/products/events/fullrun_ccd3_acisf13480_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 5 counts
[Tue Feb 28 05:51:37 2012] Not generating rmf since there are only 35 counts
[Tue Feb 28 05:51:37 2012] arf not found, will run specextract
[Tue Feb 28 05:52:14 2012] ../../acisf13480/products/spectra/fullrun_ccd3_acisf13480_pi14-548_pass1_cl_src18.warf not found
[Tue Feb 28 05:52:14 2012] ../../acisf13480/products/spectra/fullrun_ccd3_acisf13480_pi14-548_pass1_cl_src18.wrmf not found
[Tue Feb 28 05:52:14 2012] Removal of ../../acisf13480/products/spectra/fullrun_ccd3_acisf13480_pi14-548_pass1_cl_src18.soff failed
[Tue Feb 28 06:05:54 2012] Spectrum 18 has only 36 counts, deleting rmf
[Tue Feb 28 06:05:54 2012] 201.667
[Tue Feb 28 06:09:49 2012] Updating aperture counts using extracted products
[Tue Feb 28 06:09:49 2012] Error reading totcts from fullrun_ccd3_acisf13480_pi14-548_pass1_cl_src18_src.pi.gz
[Tue Feb 28 06:09:49 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 28 06:09:49 2012] Using photon index=1.80, rate=0.000723, arf fullrun_ccd3_acisf13480_pi14-548_pass1_cl_src18.arf
[Tue Feb 28 06:09:49 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 28 06:09:49 2012] Updating source flux to 8.5e-15
[Tue Feb 28 06:10:03 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Feb 28 06:10:04 2012] acisf13480/analysis//spectral/fullrun_ccd3_acisf13480_pi14-548_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete