[Tue Feb 28 01:50:01 2012] Detection parameters:
  Position = (477.3, 657.0) = 1 52 3.92 -60 0 51.8
  Extent = 1.0" x 0.5", rotation angle = 43 degrees
  Source counts = 12.1 +/- 3.6
  Background counts = 0.9
  Rate = 0.0002 +/- 7e-05

[Tue Feb 28 01:50:01 2012] Off-axis axis estimate = 5.30'
[Tue Feb 28 02:51:30 2012] Using EEF radius (= 1.30 ")to estimate initial spatial extent for simple fitting
[Tue Feb 28 02:51:30 2012] Initial guess for spatial extent in simple fitting = 1.30"
[Tue Feb 28 02:51:30 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.907
[Tue Feb 28 02:51:30 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 1.30"
[Tue Feb 28 03:05:51 2012] fullrun_ccd2_acisf13480_pi14-548_cl_pass0_src9.ximg exists
[Tue Feb 28 03:05:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13480_pi14-548_cl_pass0_src9.csv
[Tue Feb 28 03:05:51 2012] fullrun_ccd2_acisf13480_pi14-548_cl_pass0_src9_1.ximg exists
[Tue Feb 28 03:05:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13480_pi14-548_cl_pass0_src9.csv
[Tue Feb 28 03:05:51 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13480_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13480_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 03:05:51 2012] fullrun_ccd2_acisf13480_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Tue Feb 28 03:05:51 2012] fullrun_ccd2_acisf13480_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Feb 28 03:05:51 2012] Fit fullrun_ccd2_acisf13480_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Tue Feb 28 03:42:58 2012] Spatial fit model total counts = 19.177400, observed total counts = 19.000000
[Tue Feb 28 03:42:58 2012] Offset between fit and detection position for source 12 = 0.323448 pixels
[Tue Feb 28 03:42:58 2012] 19.664120 total counts/ 11.113000 bgd. counts: snr = 2.565118
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.323448 pixels
  Position = (477.7, 657.1) = 1 52 3.93 -60 0 52.0
  Extent = 0.6 (0.3-0.9)", rotation angle = 0
  Source counts = 8.6 +/- 4.4
  Background counts = 11.1
  Rate = 0.0002 +/- 9e-05
[Tue Feb 28 03:42:58 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 03:42:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 03:42:58 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 03:42:58 2012] Source does appear to be extended
[Tue Feb 28 03:42:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 04:36:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 28 04:36:02 2012] Initial guess for spatial extent in simple fitting = 0.63"
[Tue Feb 28 04:36:02 2012] Spatial fitting skipped for pass 1: source                                 has 8.6 net counts, is at off-axis angle 5.3'
[Tue Feb 28 05:24:15 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 05:24:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 05:24:15 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 05:24:15 2012] Source does appear to be extended
[Tue Feb 28 05:24:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 05:37:59 2012] Writing source region out to fullrun_ccd2_acisf13480_pi14-548_pass1_cl_src12_src.reg
[Tue Feb 28 05:37:59 2012] Extracting stamp from image fullrun_ccd2_acisf13480_pi14-548_cl_sm2.00.img.gz, (449, 628) - (507, 686)
[Tue Feb 28 05:37:59 2012] Writing fullrun_ccd2_acisf13480_pi14-548_pass1_cl_src12.gif
[Tue Feb 28 05:42:44 2012] Size of ../../acisf13480/products/events/fullrun_ccd2_acisf13480_pi14-548_pass1_cl_src12_src.evt.gz[events] = 13 counts
[Tue Feb 28 05:42:44 2012] Mean chipx,y = (678.31, 463.54)
[Tue Feb 28 05:42:44 2012] Mean tdetx,y = (3524.54, 3407.69)
[Tue Feb 28 05:42:44 2012] chipx,y range = (660.00-693.00, 443.00-476.00)
[Tue Feb 28 05:42:44 2012] Size of ../../acisf13480/products/events/fullrun_ccd2_acisf13480_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 10 counts
[Tue Feb 28 05:42:45 2012] Not generating rmf since there are only 8 counts
[Tue Feb 28 05:42:45 2012] arf not found, will run specextract
[Tue Feb 28 05:43:10 2012] ../../acisf13480/products/spectra/fullrun_ccd2_acisf13480_pi14-548_pass1_cl_src12.warf not found
[Tue Feb 28 05:43:10 2012] ../../acisf13480/products/spectra/fullrun_ccd2_acisf13480_pi14-548_pass1_cl_src12.wrmf not found
[Tue Feb 28 05:43:10 2012] Removal of ../../acisf13480/products/spectra/fullrun_ccd2_acisf13480_pi14-548_pass1_cl_src12.soff failed
[Tue Feb 28 05:49:11 2012] Spectrum 12 has only 9 counts, deleting rmf
[Tue Feb 28 05:49:11 2012] 175.502
[Tue Feb 28 06:09:49 2012] Updating aperture counts using extracted products
[Tue Feb 28 06:09:49 2012] Error reading totcts from fullrun_ccd2_acisf13480_pi14-548_pass1_cl_src12_src.pi.gz
[Tue Feb 28 06:09:49 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 28 06:09:49 2012] Using photon index=1.80, rate=0.000173, arf fullrun_ccd2_acisf13480_pi14-548_pass1_cl_src12.arf
[Tue Feb 28 06:09:49 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 28 06:09:49 2012] Updating source flux to 2.4e-15
[Tue Feb 28 06:10:02 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Feb 28 06:10:03 2012] acisf13480/analysis//spectral/fullrun_ccd2_acisf13480_pi14-548_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete