[Tue Feb 28 01:48:57 2012] Detection parameters:
  Position = (653.5, 925.9) = 1 50 48.09 -60 1 41.3
  Extent = 2.4" x 1.7", rotation angle = 139 degrees
  Source counts = 58.2 +/- 8.4
  Background counts = 12.8
  Rate = 0.001 +/- 0.0002

[Tue Feb 28 01:48:58 2012] Off-axis axis estimate = 7.30'
[Tue Feb 28 01:53:13 2012] Using EEF radius (= 2.36 ")to estimate initial spatial extent for simple fitting
[Tue Feb 28 01:53:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 28 01:53:13 2012] Initial guess for spatial extent in simple fitting = 2.36"
[Tue Feb 28 01:53:13 2012] source mask rpix=4.8, npix_max = 112, mask sum = 104, frac = 0.925
[Tue Feb 28 01:53:13 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 2.36"
[Tue Feb 28 02:24:34 2012] fullrun_ccd0_acisf13480_pi14-548_cl_pass0_src3.ximg exists
[Tue Feb 28 02:24:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13480_pi14-548_cl_pass0_src3.csv
[Tue Feb 28 02:24:34 2012] fullrun_ccd0_acisf13480_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Feb 28 02:24:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13480_pi14-548_cl_pass0_src3.csv
[Tue Feb 28 02:24:34 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13480_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13480_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 02:24:34 2012] fullrun_ccd0_acisf13480_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Feb 28 02:24:34 2012] fullrun_ccd0_acisf13480_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Feb 28 02:24:34 2012] Fit fullrun_ccd0_acisf13480_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Feb 28 03:42:54 2012] Spatial fit model total counts = 107.193000, observed total counts = 112.000000
[Tue Feb 28 03:42:54 2012] Offset between fit and detection position for source 3 = 1.759143 pixels
[Tue Feb 28 03:42:54 2012] 91.624700 total counts/ 20.221400 bgd. counts: snr = 15.878617
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.759143 pixels
  Position = (654.5, 927.3) = 1 50 48.05 -60 1 40.8
  Extent = 2.9 (2.2-3.8)", rotation angle = 0
  Source counts = 71.4 +/- 9.6
  Background counts = 20.2
  Rate = 0.001 +/- 0.0002
[Tue Feb 28 03:42:54 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 03:42:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 03:42:54 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 03:42:54 2012] Source does appear to be extended
[Tue Feb 28 03:42:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 03:43:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 28 03:43:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 28 03:43:18 2012] Initial guess for spatial extent in simple fitting = 2.89"
[Tue Feb 28 03:43:18 2012] source mask rpix=5.9, npix_max = 162, mask sum = 160, frac = 0.985
[Tue Feb 28 03:43:18 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 2.89"
[Tue Feb 28 04:14:48 2012] fullrun_ccd0_acisf13480_pi14-548_cl_pass1_src3.ximg exists
[Tue Feb 28 04:14:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13480_pi14-548_cl_pass1_src3.csv
[Tue Feb 28 04:14:48 2012] fullrun_ccd0_acisf13480_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Feb 28 04:14:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13480_pi14-548_cl_pass1_src3.csv
[Tue Feb 28 04:14:48 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13480_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13480_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 04:14:48 2012] fullrun_ccd0_acisf13480_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Feb 28 04:14:48 2012] fullrun_ccd0_acisf13480_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Feb 28 04:14:48 2012] Fit fullrun_ccd0_acisf13480_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Feb 28 05:24:12 2012] Warning, spatial fit 3 centroid is now closest to src. 4
[Tue Feb 28 05:24:12 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 05:24:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 05:24:12 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 05:24:12 2012] Source does appear to be extended
[Tue Feb 28 05:24:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 05:24:34 2012] Writing source region out to fullrun_ccd0_acisf13480_pi14-548_pass1_cl_src3_src.reg
[Tue Feb 28 05:24:34 2012] Extracting stamp from image fullrun_ccd0_acisf13480_pi14-548_cl_sm2.00.img.gz, (522, 795) - (787, 1059)
[Tue Feb 28 05:24:34 2012] Writing fullrun_ccd0_acisf13480_pi14-548_pass1_cl_src3.gif
[Tue Feb 28 05:25:47 2012] Size of ../../acisf13480/products/events/fullrun_ccd0_acisf13480_pi14-548_pass1_cl_src3_src.evt.gz[events] = 125 counts
[Tue Feb 28 05:25:47 2012] Mean chipx,y = (606.51, 758.26)
[Tue Feb 28 05:25:47 2012] Mean tdetx,y = (3819.26, 4525.49)
[Tue Feb 28 05:25:47 2012] chipx,y range = (566.00-636.00, 732.00-784.00)
[Tue Feb 28 05:25:47 2012] Size of ../../acisf13480/products/events/fullrun_ccd0_acisf13480_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 200 counts
[Tue Feb 28 05:25:48 2012] Not generating rmf since there are only 71 counts
[Tue Feb 28 05:25:48 2012] arf not found, will run specextract
[Tue Feb 28 05:26:15 2012] ../../acisf13480/products/spectra/fullrun_ccd0_acisf13480_pi14-548_pass1_cl_src3.warf not found
[Tue Feb 28 05:26:15 2012] ../../acisf13480/products/spectra/fullrun_ccd0_acisf13480_pi14-548_pass1_cl_src3.wrmf not found
[Tue Feb 28 05:26:15 2012] Removal of ../../acisf13480/products/spectra/fullrun_ccd0_acisf13480_pi14-548_pass1_cl_src3.soff failed
[Tue Feb 28 05:30:06 2012] Spectrum 3 has only 71 counts, deleting rmf
[Tue Feb 28 05:30:06 2012] 172.202
[Tue Feb 28 06:09:48 2012] Updating aperture counts using extracted products
[Tue Feb 28 06:09:48 2012] Error reading totcts from fullrun_ccd0_acisf13480_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Feb 28 06:09:48 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 28 06:09:48 2012] Using photon index=1.80, rate=0.00145, arf fullrun_ccd0_acisf13480_pi14-548_pass1_cl_src3.arf
[Tue Feb 28 06:09:48 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 28 06:09:48 2012] Updating source flux to 1.9e-14
[Tue Feb 28 06:09:53 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting