[Sun May 19 11:20:20 2013] Detection parameters:
  Position = (993.6, 138.1) = 4 6 41.69 -48 7 48.9
  Extent = 0.8" x 0.5", rotation angle = 166 degrees
  Source counts = 24.2 +/- 5.0
  Background counts = 0.8
  Rate = 0.0009 +/- 0.0002

[Sun May 19 11:20:20 2013] Off-axis axis estimate = 3.37'
[Sun May 19 12:18:13 2013] Using EEF radius (= 0.66 ")to estimate initial spatial extent for simple fitting
[Sun May 19 12:18:13 2013] Initial guess for spatial extent in simple fitting = 0.66"
[Sun May 19 12:18:13 2013] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.885
[Sun May 19 12:18:13 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 0.66"
[Sun May 19 12:34:08 2013] fullrun_ccd3_acisf13477_pi14-548_cl_pass0_src7.ximg exists
[Sun May 19 12:34:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13477_pi14-548_cl_pass0_src7.csv
[Sun May 19 12:34:08 2013] fullrun_ccd3_acisf13477_pi14-548_cl_pass0_src7_1.ximg exists
[Sun May 19 12:34:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13477_pi14-548_cl_pass0_src7.csv
[Sun May 19 12:34:08 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13477_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13477_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 12:34:08 2013] fullrun_ccd3_acisf13477_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Sun May 19 12:34:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13477_pi14-548_cl_pass0_tfrozen_src7.csv
[Sun May 19 12:34:08 2013] fullrun_ccd3_acisf13477_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Sun May 19 12:34:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13477_pi14-548_cl_pass0_tfrozen_src7.csv
[Sun May 19 12:34:08 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13477_pi14-548_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13477_pi14-548_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 13:10:51 2013] Spatial fit model total counts = 22.219000, observed total counts = 27.000000
[Sun May 19 13:10:51 2013] Offset between fit and detection position for source 29 = 0.577107 pixels
[Sun May 19 13:10:51 2013] 23.649270 total counts/ 1.278870 bgd. counts: snr = 19.781561
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.577107 pixels
  Position = (993.8, 138.7) = 4 6 41.71 -48 7 48.9
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 22.4 +/- 4.9
  Background counts = 1.3
  Rate = 0.0009 +/- 0.0002
[Sun May 19 13:10:51 2013] Vigneting correction estimate = 1.000000
[Sun May 19 13:10:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 13:10:51 2013] Assessing source extent using major axis lower bound
[Sun May 19 13:10:51 2013] Source does appear to be extended
[Sun May 19 13:10:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:02:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 19 14:02:03 2013] Initial guess for spatial extent in simple fitting = 0.78"
[Sun May 19 14:02:03 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.920
[Sun May 19 14:02:03 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 0.78"
[Sun May 19 14:18:07 2013] fullrun_ccd3_acisf13477_pi14-548_cl_pass1_src7.ximg exists
[Sun May 19 14:18:07 2013] fullrun_ccd3_acisf13477_pi14-548_cl_pass1_src7_1.ximg exists
[Sun May 19 14:18:07 2013] Fit fullrun_ccd3_acisf13477_pi14-548_cl_pass1_src7 appears to have run properly
[Sun May 19 14:18:07 2013] fullrun_ccd3_acisf13477_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Sun May 19 14:18:07 2013] fullrun_ccd3_acisf13477_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Sun May 19 14:18:07 2013] Fit fullrun_ccd3_acisf13477_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Sun May 19 15:07:23 2013] Spatial fit model total counts = 26.007900, observed total counts = 27.000000
[Sun May 19 15:07:23 2013] Offset between fit and detection position for source 29 = 0.050356 pixels
[Sun May 19 15:07:23 2013] 26.808290 total counts/ 3.484690 bgd. counts: snr = 12.494345
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.050356 pixels
  Position = (993.8, 138.7) = 4 6 41.70 -48 7 48.8
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 23.3 +/- 5.2
  Background counts = 3.5
  Rate = 0.0009 +/- 0.0002
[Sun May 19 15:07:23 2013] Vigneting correction estimate = 1.000000
[Sun May 19 15:07:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 15:07:23 2013] Assessing source extent using major axis lower bound
[Sun May 19 15:07:23 2013] Source does appear to be extended
[Sun May 19 15:07:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 15:26:41 2013] Writing source region out to fullrun_ccd3_acisf13477_pi14-548_pass1_cl_src29_src.reg
[Sun May 19 15:26:41 2013] Extracting stamp from image fullrun_ccd3_acisf13477_pi14-548_cl_sm2.00.img.gz, (960, 105) - (1027, 172)
[Sun May 19 15:26:41 2013] Writing fullrun_ccd3_acisf13477_pi14-548_pass1_cl_src29.gif
[Sun May 19 15:30:22 2013] Size of ../../acisf13477/products/events/fullrun_ccd3_acisf13477_pi14-548_pass1_cl_src29_src.evt.gz[events] = 24 counts
[Sun May 19 15:30:22 2013] Mean chipx,y = (1003.96, 866.29)
[Sun May 19 15:30:22 2013] Mean tdetx,y = (4265.71, 4064.96)
[Sun May 19 15:30:22 2013] chipx,y range = (986.00-1020.00, 851.00-886.00)
[Sun May 19 15:30:22 2013] Size of ../../acisf13477/products/events/fullrun_ccd3_acisf13477_pi14-548_pass1_cl_src29_bgd.evt.gz[events] = 3 counts
[Sun May 19 15:30:23 2013] Not generating rmf since there are only 23 counts
[Sun May 19 15:30:23 2013] arf not found, will run specextract
[Sun May 19 15:30:50 2013] ../../acisf13477/products/spectra/fullrun_ccd3_acisf13477_pi14-548_pass1_cl_src29.warf not found
[Sun May 19 15:30:50 2013] ../../acisf13477/products/spectra/fullrun_ccd3_acisf13477_pi14-548_pass1_cl_src29.wrmf not found
[Sun May 19 15:30:50 2013] Removal of ../../acisf13477/products/spectra/fullrun_ccd3_acisf13477_pi14-548_pass1_cl_src29.soff failed
[Sun May 19 15:41:12 2013] Spectrum 29 has only 23 counts, deleting rmf
[Sun May 19 15:41:12 2013] 198.534
[Sun May 19 15:44:42 2013] Updating aperture counts using extracted products
[Sun May 19 15:44:42 2013] Total counts from fullrun_ccd3_acisf13477_pi14-548_pass1_cl_src29_src.pi.gz = 24.00
[Sun May 19 15:44:42 2013] Total counts from fullrun_ccd3_acisf13477_pi14-548_pass1_cl_src29_bgd.pi.gz = 3.00
[Sun May 19 15:44:42 2013] Got source and background scale factors 0.000002, 0.000020
[Sun May 19 15:44:42 2013] User source parameters:
  Position = (993.8, 138.7) = 4 6 41.70 -48 7 48.8
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source aperture counts = 23.7 +/- 6.0
  Background aperture counts = 0.3
  Rate = 0.0009 +/- 0.0002

[Sun May 19 15:44:45 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 15:44:45 2013] Using photon index=1.80, rate=0.000896, arf fullrun_ccd3_acisf13477_pi14-548_pass1_cl_src29.arf
[Sun May 19 15:44:45 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May 19 15:44:45 2013] Updating source flux to 1.1e-14
[Sun May 19 15:44:57 2013] Source 29 has fewer than 100.000000 counts, skipping spectral fitting