[Sun May 19 11:20:19 2013] Detection parameters:
  Position = (901.4, 575.5) = 4 6 46.24 -48 4 13.7
  Extent = 0.6" x 0.5", rotation angle = 4 degrees
  Source counts = 15.5 +/- 4.0
  Background counts = 0.5
  Rate = 0.0006 +/- 0.0002

[Sun May 19 11:20:20 2013] Off-axis axis estimate = 4.44'
[Sun May 19 12:18:13 2013] Using EEF radius (= 0.97 ")to estimate initial spatial extent for simple fitting
[Sun May 19 12:18:13 2013] Initial guess for spatial extent in simple fitting = 0.97"
[Sun May 19 12:18:13 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.018
[Sun May 19 12:18:13 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 0.97"
[Sun May 19 12:34:08 2013] fullrun_ccd3_acisf13477_pi14-548_cl_pass0_src8.ximg exists
[Sun May 19 12:34:08 2013] fullrun_ccd3_acisf13477_pi14-548_cl_pass0_src8_1.ximg exists
[Sun May 19 12:34:08 2013] Fit fullrun_ccd3_acisf13477_pi14-548_cl_pass0_src8 appears to have run properly
[Sun May 19 12:34:08 2013] fullrun_ccd3_acisf13477_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Sun May 19 12:34:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13477_pi14-548_cl_pass0_tfrozen_src8.csv
[Sun May 19 12:34:08 2013] fullrun_ccd3_acisf13477_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Sun May 19 12:34:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13477_pi14-548_cl_pass0_tfrozen_src8.csv
[Sun May 19 12:34:08 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13477_pi14-548_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13477_pi14-548_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 13:10:51 2013] Spatial fit model total counts = 15.366000, observed total counts = 17.000000
[Sun May 19 13:10:51 2013] Offset between fit and detection position for source 18 = 0.662194 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.662194 pixels
  Position = (901.8, 576.0) = 4 6 46.24 -48 4 13.7
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 15.5 +/- 3.9
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Sun May 19 13:10:51 2013] Vigneting correction estimate = 1.000000
[Sun May 19 13:10:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 13:10:51 2013] Assessing source extent using major axis lower bound
[Sun May 19 13:10:51 2013] Source does appear to be extended
[Sun May 19 13:10:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:02:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 19 14:02:03 2013] Initial guess for spatial extent in simple fitting = 0.73"
[Sun May 19 14:02:03 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.022
[Sun May 19 14:02:03 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 0.73"
[Sun May 19 14:18:07 2013] fullrun_ccd3_acisf13477_pi14-548_cl_pass1_src8.ximg exists
[Sun May 19 14:18:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13477_pi14-548_cl_pass1_src8.csv
[Sun May 19 14:18:07 2013] fullrun_ccd3_acisf13477_pi14-548_cl_pass1_src8_1.ximg exists
[Sun May 19 14:18:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13477_pi14-548_cl_pass1_src8.csv
[Sun May 19 14:18:07 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13477_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13477_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:18:07 2013] fullrun_ccd3_acisf13477_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Sun May 19 14:18:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13477_pi14-548_cl_pass1_tfrozen_src8.csv
[Sun May 19 14:18:07 2013] fullrun_ccd3_acisf13477_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Sun May 19 14:18:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13477_pi14-548_cl_pass1_tfrozen_src8.csv
[Sun May 19 14:18:07 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13477_pi14-548_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13477_pi14-548_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 15:07:23 2013] Spatial fit model total counts = 15.366800, observed total counts = 17.000000
[Sun May 19 15:07:23 2013] Offset between fit and detection position for source 18 = 0.025683 pixels
[Sun May 19 15:07:23 2013] 15.295900 total counts/ 0.000000 bgd. counts: snr = 772689721983085.000000
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.025683 pixels
  Position = (901.8, 576.0) = 4 6 46.24 -48 4 13.7
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 15.3 +/- 3.9
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Sun May 19 15:07:23 2013] Vigneting correction estimate = 1.000000
[Sun May 19 15:07:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 15:07:23 2013] Assessing source extent using major axis lower bound
[Sun May 19 15:07:23 2013] Source does appear to be extended
[Sun May 19 15:07:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 15:26:41 2013] Writing source region out to fullrun_ccd3_acisf13477_pi14-548_pass1_cl_src18_src.reg
[Sun May 19 15:26:41 2013] Extracting stamp from image fullrun_ccd3_acisf13477_pi14-548_cl_sm2.00.img.gz, (870, 544) - (933, 608)
[Sun May 19 15:26:41 2013] Writing fullrun_ccd3_acisf13477_pi14-548_pass1_cl_src18.gif
[Sun May 19 15:31:35 2013] Size of ../../acisf13477/products/events/fullrun_ccd3_acisf13477_pi14-548_pass1_cl_src18_src.evt.gz[events] = 16 counts
[Sun May 19 15:31:35 2013] Mean chipx,y = (750.75, 506.38)
[Sun May 19 15:31:35 2013] Mean tdetx,y = (4625.62, 3811.75)
[Sun May 19 15:31:35 2013] chipx,y range = (731.00-766.00, 485.00-518.00)
[Sun May 19 15:31:35 2013] Size of ../../acisf13477/products/events/fullrun_ccd3_acisf13477_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 8 counts
[Sun May 19 15:31:36 2013] Not generating rmf since there are only 15 counts
[Sun May 19 15:31:36 2013] arf not found, will run specextract
[Sun May 19 15:32:00 2013] ../../acisf13477/products/spectra/fullrun_ccd3_acisf13477_pi14-548_pass1_cl_src18.warf not found
[Sun May 19 15:32:00 2013] ../../acisf13477/products/spectra/fullrun_ccd3_acisf13477_pi14-548_pass1_cl_src18.wrmf not found
[Sun May 19 15:32:00 2013] Removal of ../../acisf13477/products/spectra/fullrun_ccd3_acisf13477_pi14-548_pass1_cl_src18.soff failed
[Sun May 19 15:41:12 2013] Spectrum 18 has only 15 counts, deleting rmf
[Sun May 19 15:41:12 2013] 192.892
[Sun May 19 15:44:43 2013] Updating aperture counts using extracted products
[Sun May 19 15:44:43 2013] Total counts from fullrun_ccd3_acisf13477_pi14-548_pass1_cl_src18_src.pi.gz = 16.00
[Sun May 19 15:44:43 2013] Total counts from fullrun_ccd3_acisf13477_pi14-548_pass1_cl_src18_bgd.pi.gz = 8.00
[Sun May 19 15:44:43 2013] Got source and background scale factors 0.000001, 0.000017
[Sun May 19 15:44:43 2013] User source parameters:
  Position = (901.8, 576.0) = 4 6 46.24 -48 4 13.7
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source aperture counts = 15.3 +/- 5.1
  Background aperture counts = 0.7
  Rate = 0.0006 +/- 0.0002

[Sun May 19 15:44:45 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 15:44:45 2013] Using photon index=1.80, rate=0.000587, arf fullrun_ccd3_acisf13477_pi14-548_pass1_cl_src18.arf
[Sun May 19 15:44:45 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May 19 15:44:45 2013] Updating source flux to 7.3e-15
[Sun May 19 15:44:57 2013] Source 18 has fewer than 100.000000 counts, skipping spectral fitting