[Sun Dec 18 05:33:38 2011] Detection parameters:
  Position = (521.0, 128.5) = 4 41 50.75 -48 57 43.1
  Extent = 0.5" x 0.5", rotation angle = 116 degrees
  Source counts = 161.7 +/- 12.8
  Background counts = 1.3
  Rate = 0.007 +/- 0.0005

[Sun Dec 18 05:33:39 2011] Off-axis axis estimate = 3.23'
[Sun Dec 18 06:18:38 2011] Using EEF radius (= 0.63 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 06:18:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 18 06:18:38 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Sun Dec 18 06:18:38 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.948
[Sun Dec 18 06:18:38 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.63"
[Sun Dec 18 06:29:48 2011] fullrun_ccd3_acisf13475_pi14-548_cl_pass0_src1.ximg exists
[Sun Dec 18 06:29:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13475_pi14-548_cl_pass0_src1.csv
[Sun Dec 18 06:29:48 2011] fullrun_ccd3_acisf13475_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Dec 18 06:29:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13475_pi14-548_cl_pass0_src1.csv
[Sun Dec 18 06:29:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13475_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13475_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 06:29:48 2011] fullrun_ccd3_acisf13475_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Dec 18 06:29:48 2011] fullrun_ccd3_acisf13475_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Dec 18 06:29:48 2011] Fit fullrun_ccd3_acisf13475_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Dec 18 07:19:56 2011] Spatial fit model total counts = 165.798000, observed total counts = 166.000000
[Sun Dec 18 07:19:56 2011] Offset between fit and detection position for source 3 = 0.699058 pixels
[Sun Dec 18 07:19:56 2011] 165.550400 total counts/ 13.418400 bgd. counts: snr = 41.530791
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.699058 pixels
  Position = (521.5, 129.0) = 4 41 50.75 -48 57 43.1
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 152.1 +/- 12.9
  Background counts = 13.4
  Rate = 0.006 +/- 0.0005
[Sun Dec 18 07:19:56 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 07:19:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 07:19:56 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 07:19:56 2011] Source does appear to be extended
[Sun Dec 18 07:19:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 07:59:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 18 07:59:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 18 07:59:11 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Sun Dec 18 07:59:11 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.107
[Sun Dec 18 07:59:11 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.56"
[Sun Dec 18 08:09:38 2011] fullrun_ccd3_acisf13475_pi14-548_cl_pass1_src1.ximg exists
[Sun Dec 18 08:09:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13475_pi14-548_cl_pass1_src1.csv
[Sun Dec 18 08:09:38 2011] fullrun_ccd3_acisf13475_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Dec 18 08:09:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13475_pi14-548_cl_pass1_src1.csv
[Sun Dec 18 08:09:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13475_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13475_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 08:09:38 2011] fullrun_ccd3_acisf13475_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Dec 18 08:09:38 2011] fullrun_ccd3_acisf13475_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Dec 18 08:09:38 2011] Fit fullrun_ccd3_acisf13475_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Dec 18 09:02:55 2011] Spatial fit model total counts = 162.434000, observed total counts = 163.000000
[Sun Dec 18 09:02:55 2011] Offset between fit and detection position for source 3 = 0.016148 pixels
[Sun Dec 18 09:02:55 2011] 162.394740 total counts/ 9.864740 bgd. counts: snr = 48.563776
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.016148 pixels
  Position = (521.5, 129.0) = 4 41 50.75 -48 57 43.1
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 152.5 +/- 12.7
  Background counts = 9.9
  Rate = 0.006 +/- 0.0005
[Sun Dec 18 09:02:55 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 09:02:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 09:02:55 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 09:02:55 2011] Source does appear to be extended
[Sun Dec 18 09:02:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 09:17:10 2011] Writing source region out to fullrun_ccd3_acisf13475_pi14-548_pass1_cl_src3_src.reg
[Sun Dec 18 09:17:10 2011] Extracting stamp from image fullrun_ccd3_acisf13475_pi14-548_cl_sm2.00.img.gz, (495, 103) - (548, 155)
[Sun Dec 18 09:17:10 2011] Writing fullrun_ccd3_acisf13475_pi14-548_pass1_cl_src3.gif
[Sun Dec 18 09:17:11 2011] Size of ../../acisf13475/products/events/fullrun_ccd3_acisf13475_pi14-548_pass1_cl_src3_src.evt.gz[events] = 156 counts
[Sun Dec 18 09:17:11 2011] Mean chipx,y = (966.46, 801.56)
[Sun Dec 18 09:17:11 2011] Mean tdetx,y = (4330.44, 4027.46)
[Sun Dec 18 09:17:11 2011] chipx,y range = (950.00-987.00, 784.00-820.00)
[Sun Dec 18 09:17:11 2011] Size of ../../acisf13475/products/events/fullrun_ccd3_acisf13475_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 10 counts
[Sun Dec 18 09:17:13 2011] rmf not found, will run specextract
[Sun Dec 18 09:17:13 2011] arf not found, will run specextract
[Sun Dec 18 09:17:41 2011] ../../acisf13475/products/spectra/fullrun_ccd3_acisf13475_pi14-548_pass1_cl_src3.warf not found
[Sun Dec 18 09:17:41 2011] ../../acisf13475/products/spectra/fullrun_ccd3_acisf13475_pi14-548_pass1_cl_src3.wrmf not found
[Sun Dec 18 09:17:41 2011] Removal of ../../acisf13475/products/spectra/fullrun_ccd3_acisf13475_pi14-548_pass1_cl_src3.soff failed
[Sun Dec 18 09:28:08 2011] Keeping rmf generated by specextract
[Sun Dec 18 09:28:08 2011] 198.846
[Sun Dec 18 09:31:16 2011] Updating aperture counts using extracted products
[Sun Dec 18 09:31:16 2011] Error reading totcts from fullrun_ccd3_acisf13475_pi14-548_pass1_cl_src3_src.pi.gz
[Sun Dec 18 09:31:16 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 09:31:16 2011] Using photon index=1.80, rate=0.00617, arf fullrun_ccd3_acisf13475_pi14-548_pass1_cl_src3.arf
[Sun Dec 18 09:31:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Dec 18 09:31:16 2011] Updating source flux to 7.3e-14
[Sun Dec 18 09:31:32 2011] Reading fit data from acisf13475/analysis//spectral/fullrun_ccd3_acisf13475_pi14-548_pass1_cl_src3_pl.csv
[Sun Dec 18 09:31:32 2011] Spectral fit parameter nH value = 2.05079e+21
[Sun Dec 18 09:31:32 2011] Spectral fit parameter PhoIndex value = 2.35246
[Sun Dec 18 09:31:32 2011] Failed to get F(0.3-8.0) from acisf13475/analysis//spectral/fullrun_ccd3_acisf13475_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sun Dec 18 09:31:32 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 09:31:32 2011] Using Nh = 2.1e+21, photon index=2.35, rate=0.00617, arf fullrun_ccd3_acisf13475_pi14-548_pass1_cl_src3.arf
[Sun Dec 18 09:31:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Dec 18 09:31:32 2011] Updating source flux to 5.9e-14