[Sun Dec 18 05:33:08 2011] Detection parameters:
  Position = (1140.5, 575.1) = 4 42 9.16 -48 56 55.2
  Extent = 0.5" x 0.5", rotation angle = 98 degrees
  Source counts = 21.6 +/- 4.7
  Background counts = 0.4
  Rate = 0.0009 +/- 0.0002

[Sun Dec 18 05:33:08 2011] Off-axis axis estimate = 1.29'
[Sun Dec 18 06:06:44 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 06:06:44 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Dec 18 06:06:44 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.914
[Sun Dec 18 06:06:44 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 0.38"
[Sun Dec 18 06:18:38 2011] fullrun_ccd2_acisf13475_pi14-548_cl_pass0_src4.ximg exists
[Sun Dec 18 06:18:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13475_pi14-548_cl_pass0_src4.csv
[Sun Dec 18 06:18:38 2011] fullrun_ccd2_acisf13475_pi14-548_cl_pass0_src4_1.ximg exists
[Sun Dec 18 06:18:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13475_pi14-548_cl_pass0_src4.csv
[Sun Dec 18 06:18:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13475_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13475_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 06:18:38 2011] fullrun_ccd2_acisf13475_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Sun Dec 18 06:18:38 2011] fullrun_ccd2_acisf13475_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Dec 18 06:18:38 2011] Fit fullrun_ccd2_acisf13475_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Dec 18 07:19:55 2011] Spatial fit model total counts = 25.699400, observed total counts = 26.000000
[Sun Dec 18 07:19:55 2011] Offset between fit and detection position for source 3 = 0.795790 pixels
[Sun Dec 18 07:19:55 2011] 24.905080 total counts/ 3.625480 bgd. counts: snr = 11.175854
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.795790 pixels
  Position = (1141.0, 575.7) = 4 42 9.16 -48 56 55.1
  Extent = 0.3 (0.3-0.5)", rotation angle = 0
  Source counts = 21.3 +/- 5.0
  Background counts = 3.6
  Rate = 0.0009 +/- 0.0002
[Sun Dec 18 07:19:55 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 07:19:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 07:19:55 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 07:19:55 2011] Source does appear to be extended
[Sun Dec 18 07:19:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 07:47:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 18 07:47:40 2011] Initial guess for spatial extent in simple fitting = 0.31"
[Sun Dec 18 07:47:40 2011] source mask rpix=0.6, npix_max = 5, mask sum = 4, frac = 0.772
[Sun Dec 18 07:47:40 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 0.31"
[Sun Dec 18 07:59:11 2011] fullrun_ccd2_acisf13475_pi14-548_cl_pass1_src4.ximg exists
[Sun Dec 18 07:59:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13475_pi14-548_cl_pass1_src4.csv
[Sun Dec 18 07:59:11 2011] fullrun_ccd2_acisf13475_pi14-548_cl_pass1_src4_1.ximg exists
[Sun Dec 18 07:59:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13475_pi14-548_cl_pass1_src4.csv
[Sun Dec 18 07:59:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13475_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13475_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 07:59:11 2011] fullrun_ccd2_acisf13475_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Sun Dec 18 07:59:11 2011] fullrun_ccd2_acisf13475_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Dec 18 07:59:11 2011] Fit fullrun_ccd2_acisf13475_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Dec 18 09:02:53 2011] Spatial fit model total counts = 24.138800, observed total counts = 26.000000
[Sun Dec 18 09:02:53 2011] Offset between fit and detection position for source 3 = 0.007667 pixels
[Sun Dec 18 09:02:53 2011] 23.155960 total counts/ 2.415160 bgd. counts: snr = 13.346044
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.007667 pixels
  Position = (1141.0, 575.7) = 4 42 9.16 -48 56 55.1
  Extent = 0.3 (0.3-0.4)", rotation angle = 0
  Source counts = 20.7 +/- 4.8
  Background counts = 2.4
  Rate = 0.0008 +/- 0.0002
[Sun Dec 18 09:02:53 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 09:02:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 09:02:53 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 09:02:53 2011] Source does appear to be extended
[Sun Dec 18 09:02:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 09:09:59 2011] Writing source region out to fullrun_ccd2_acisf13475_pi14-548_pass1_cl_src3_src.reg
[Sun Dec 18 09:09:59 2011] Extracting stamp from image fullrun_ccd2_acisf13475_pi14-548_cl_sm2.00.img.gz, (1126, 561) - (1156, 590)
[Sun Dec 18 09:09:59 2011] Writing fullrun_ccd2_acisf13475_pi14-548_pass1_cl_src3.gif
[Sun Dec 18 09:11:39 2011] Size of ../../acisf13475/products/events/fullrun_ccd2_acisf13475_pi14-548_pass1_cl_src3_src.evt.gz[events] = 22 counts
[Sun Dec 18 09:11:39 2011] Mean chipx,y = (270.27, 957.91)
[Sun Dec 18 09:11:39 2011] Mean tdetx,y = (4018.91, 3815.73)
[Sun Dec 18 09:11:39 2011] chipx,y range = (259.00-291.00, 940.00-971.00)
[Sun Dec 18 09:11:39 2011] Size of ../../acisf13475/products/events/fullrun_ccd2_acisf13475_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 4 counts
[Sun Dec 18 09:11:40 2011] Not generating rmf since there are only 20 counts
[Sun Dec 18 09:11:40 2011] arf not found, will run specextract
[Sun Dec 18 09:12:10 2011] ../../acisf13475/products/spectra/fullrun_ccd2_acisf13475_pi14-548_pass1_cl_src3.warf not found
[Sun Dec 18 09:12:10 2011] ../../acisf13475/products/spectra/fullrun_ccd2_acisf13475_pi14-548_pass1_cl_src3.wrmf not found
[Sun Dec 18 09:12:10 2011] Removal of ../../acisf13475/products/spectra/fullrun_ccd2_acisf13475_pi14-548_pass1_cl_src3.soff failed
[Sun Dec 18 09:17:09 2011] Spectrum 3 has only 21 counts, deleting rmf
[Sun Dec 18 09:17:10 2011] 197.251
[Sun Dec 18 09:31:16 2011] Updating aperture counts using extracted products
[Sun Dec 18 09:31:16 2011] Error reading totcts from fullrun_ccd2_acisf13475_pi14-548_pass1_cl_src3_src.pi.gz
[Sun Dec 18 09:31:16 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 09:31:16 2011] Using photon index=1.80, rate=0.000839, arf fullrun_ccd2_acisf13475_pi14-548_pass1_cl_src3.arf
[Sun Dec 18 09:31:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Dec 18 09:31:16 2011] Updating source flux to 1e-14
[Sun Dec 18 09:31:25 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Dec 18 09:31:26 2011] acisf13475/analysis//spectral/fullrun_ccd2_acisf13475_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete