[Fri Jun  1 02:57:47 2012] Detection parameters:
  Position = (759.1, 875.4) = 4 55 43.27 -51 19 36.8
  Extent = 0.7" x 0.5", rotation angle = 171 degrees
  Source counts = 15.1 +/- 4.0
  Background counts = 0.9
  Rate = 0.0003 +/- 8e-05

[Fri Jun  1 02:57:47 2012] Off-axis axis estimate = 4.28'
[Fri Jun  1 03:48:55 2012] Using EEF radius (= 0.92 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 03:48:55 2012] Initial guess for spatial extent in simple fitting = 0.92"
[Fri Jun  1 03:48:55 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.895
[Fri Jun  1 03:48:55 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 0.92"
[Fri Jun  1 04:14:02 2012] fullrun_ccd2_acisf13474_pi14-548_cl_pass0_src17.ximg exists
[Fri Jun  1 04:14:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13474_pi14-548_cl_pass0_src17.csv
[Fri Jun  1 04:14:02 2012] fullrun_ccd2_acisf13474_pi14-548_cl_pass0_src17_1.ximg exists
[Fri Jun  1 04:14:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13474_pi14-548_cl_pass0_src17.csv
[Fri Jun  1 04:14:02 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13474_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13474_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 04:14:02 2012] fullrun_ccd2_acisf13474_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Fri Jun  1 04:14:02 2012] fullrun_ccd2_acisf13474_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Jun  1 04:14:02 2012] Fit fullrun_ccd2_acisf13474_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Jun  1 04:46:18 2012] Spatial fit model total counts = 27.440300, observed total counts = 28.000000
[Fri Jun  1 04:46:18 2012] Offset between fit and detection position for source 10 = 2.326389 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 2.326389 pixels
  Position = (761.4, 875.9) = 4 55 43.18 -51 19 36.8
  Extent = 1.1 (0.7-1.3)", rotation angle = 0
  Source counts = 27.4 +/- 5.2
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Fri Jun  1 04:46:18 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 04:46:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 04:46:18 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 04:46:18 2012] Source does appear to be extended
[Fri Jun  1 04:46:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 05:37:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 05:37:11 2012] Initial guess for spatial extent in simple fitting = 1.10"
[Fri Jun  1 05:37:11 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.004
[Fri Jun  1 05:37:11 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 1.10"
[Fri Jun  1 05:59:22 2012] fullrun_ccd2_acisf13474_pi14-548_cl_pass1_src17.ximg exists
[Fri Jun  1 05:59:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13474_pi14-548_cl_pass1_src17.csv
[Fri Jun  1 05:59:22 2012] fullrun_ccd2_acisf13474_pi14-548_cl_pass1_src17_1.ximg exists
[Fri Jun  1 05:59:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13474_pi14-548_cl_pass1_src17.csv
[Fri Jun  1 05:59:22 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13474_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13474_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 05:59:22 2012] fullrun_ccd2_acisf13474_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Fri Jun  1 05:59:22 2012] fullrun_ccd2_acisf13474_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Jun  1 05:59:22 2012] Fit fullrun_ccd2_acisf13474_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Jun  1 06:31:38 2012] Spatial fit model total counts = 29.634400, observed total counts = 30.000000
[Fri Jun  1 06:31:38 2012] Offset between fit and detection position for source 10 = 0.389569 pixels
[Fri Jun  1 06:31:38 2012] 29.669970 total counts/ 3.224370 bgd. counts: snr = 14.727566
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.389569 pixels
  Position = (761.8, 875.8) = 4 55 43.16 -51 19 36.9
  Extent = 1.0 (0.7-1.4)", rotation angle = 0
  Source counts = 26.4 +/- 5.4
  Background counts = 3.2
  Rate = 0.0005 +/- 0.0001
[Fri Jun  1 06:31:38 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 06:31:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 06:31:38 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 06:31:38 2012] Source does appear to be extended
[Fri Jun  1 06:31:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 06:45:07 2012] Writing source region out to fullrun_ccd2_acisf13474_pi14-548_pass1_cl_src10_src.reg
[Fri Jun  1 06:45:07 2012] Extracting stamp from image fullrun_ccd2_acisf13474_pi14-548_cl_sm2.00.img.gz, (714, 828) - (809, 923)
[Fri Jun  1 06:45:07 2012] Writing fullrun_ccd2_acisf13474_pi14-548_pass1_cl_src10.gif
[Fri Jun  1 06:54:15 2012] Size of ../../acisf13474/products/events/fullrun_ccd2_acisf13474_pi14-548_pass1_cl_src10_src.evt.gz[events] = 29 counts
[Fri Jun  1 06:54:15 2012] Mean chipx,y = (325.38, 533.10)
[Fri Jun  1 06:54:15 2012] Mean tdetx,y = (3594.10, 3760.62)
[Fri Jun  1 06:54:15 2012] chipx,y range = (307.00-346.00, 515.00-555.00)
[Fri Jun  1 06:54:15 2012] Size of ../../acisf13474/products/events/fullrun_ccd2_acisf13474_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 33 counts
[Fri Jun  1 06:54:16 2012] Not generating rmf since there are only 26 counts
[Fri Jun  1 06:54:16 2012] arf not found, will run specextract
[Fri Jun  1 06:54:42 2012] ../../acisf13474/products/spectra/fullrun_ccd2_acisf13474_pi14-548_pass1_cl_src10.warf not found
[Fri Jun  1 06:54:42 2012] ../../acisf13474/products/spectra/fullrun_ccd2_acisf13474_pi14-548_pass1_cl_src10.wrmf not found
[Fri Jun  1 06:54:42 2012] Removal of ../../acisf13474/products/spectra/fullrun_ccd2_acisf13474_pi14-548_pass1_cl_src10.soff failed
[Fri Jun  1 07:01:26 2012] Spectrum 10 has only 26 counts, deleting rmf
[Fri Jun  1 07:01:26 2012] 188.464
[Fri Jun  1 07:17:38 2012] Updating aperture counts using extracted products
[Fri Jun  1 07:17:38 2012] Error reading totcts from fullrun_ccd2_acisf13474_pi14-548_pass1_cl_src10_src.pi.gz
[Fri Jun  1 07:17:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 07:17:38 2012] Using photon index=1.80, rate=0.000527, arf fullrun_ccd2_acisf13474_pi14-548_pass1_cl_src10.arf
[Fri Jun  1 07:17:38 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jun  1 07:17:38 2012] Updating source flux to 6.7e-15
[Fri Jun  1 07:17:47 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting