[Sat Dec 24 20:34:15 2011] Detection parameters:
  Position = (151.5, 1041.1) = 21 47 0.41 -46 36 29.1
  Extent = 0.7" x 0.5", rotation angle = 106 degrees
  Source counts = 23.4 +/- 5.0
  Background counts = 1.6
  Rate = 0.0003 +/- 6e-05

[Sat Dec 24 20:34:15 2011] Off-axis axis estimate = 4.20'
[Sat Dec 24 22:00:11 2011] Using EEF radius (= 0.89 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 22:00:11 2011] Initial guess for spatial extent in simple fitting = 0.89"
[Sat Dec 24 22:00:11 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.933
[Sat Dec 24 22:00:11 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 0.89"
[Sat Dec 24 22:30:49 2011] fullrun_ccd2_acisf13469_pi14-548_cl_pass0_src17.ximg exists
[Sat Dec 24 22:30:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13469_pi14-548_cl_pass0_src17.csv
[Sat Dec 24 22:30:49 2011] fullrun_ccd2_acisf13469_pi14-548_cl_pass0_src17_1.ximg exists
[Sat Dec 24 22:30:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13469_pi14-548_cl_pass0_src17.csv
[Sat Dec 24 22:30:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13469_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13469_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 22:30:49 2011] fullrun_ccd2_acisf13469_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Sat Dec 24 22:30:49 2011] fullrun_ccd2_acisf13469_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Dec 24 22:30:49 2011] Fit fullrun_ccd2_acisf13469_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Sat Dec 24 23:02:24 2011] Spatial fit model total counts = 25.510000, observed total counts = 27.000000
[Sat Dec 24 23:02:24 2011] Offset between fit and detection position for source 23 = 0.969429 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.969429 pixels
  Position = (151.9, 1042.0) = 21 47 0.41 -46 36 28.9
  Extent = 0.6 (0.6-0.9)", rotation angle = 0
  Source counts = 24.9 +/- 5.0
  Background counts = 0.0
  Rate = 0.0003 +/- 6e-05
[Sat Dec 24 23:02:24 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 23:02:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 23:02:24 2011] Assessing source extent using major axis lower bound
[Sat Dec 24 23:02:24 2011] Source does appear to be extended
[Sat Dec 24 23:02:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 00:18:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 00:18:23 2011] Initial guess for spatial extent in simple fitting = 0.64"
[Sun Dec 25 00:18:23 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.227
[Sun Dec 25 00:18:23 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 0.64"
[Sun Dec 25 00:48:29 2011] fullrun_ccd2_acisf13469_pi14-548_cl_pass1_src17.ximg exists
[Sun Dec 25 00:48:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13469_pi14-548_cl_pass1_src17.csv
[Sun Dec 25 00:48:29 2011] fullrun_ccd2_acisf13469_pi14-548_cl_pass1_src17_1.ximg exists
[Sun Dec 25 00:48:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13469_pi14-548_cl_pass1_src17.csv
[Sun Dec 25 00:48:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13469_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13469_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 00:48:29 2011] fullrun_ccd2_acisf13469_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Sun Dec 25 00:48:29 2011] fullrun_ccd2_acisf13469_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Sun Dec 25 00:48:29 2011] Fit fullrun_ccd2_acisf13469_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Sun Dec 25 01:27:20 2011] Spatial fit model total counts = 26.935900, observed total counts = 28.000000
[Sun Dec 25 01:27:20 2011] Offset between fit and detection position for source 23 = 0.112186 pixels
[Sun Dec 25 01:27:20 2011] 25.870970 total counts/ 1.683870 bgd. counts: snr = 18.639297
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.112186 pixels
  Position = (151.9, 1041.9) = 21 47 0.41 -46 36 29.0
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 24.2 +/- 5.1
  Background counts = 1.7
  Rate = 0.0003 +/- 6e-05
[Sun Dec 25 01:27:20 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 01:27:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 01:27:20 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 01:27:20 2011] Source does appear to be extended
[Sun Dec 25 01:27:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 01:45:58 2011] Writing source region out to fullrun_ccd2_acisf13469_pi14-548_pass1_cl_src23_src.reg
[Sun Dec 25 01:45:58 2011] Extracting stamp from image fullrun_ccd2_acisf13469_pi14-548_cl_sm2.00.img.gz, (121, 1011) - (183, 1073)
[Sun Dec 25 01:45:58 2011] Writing fullrun_ccd2_acisf13469_pi14-548_pass1_cl_src23.gif
[Sun Dec 25 01:55:43 2011] Size of ../../acisf13469/products/events/fullrun_ccd2_acisf13469_pi14-548_pass1_cl_src23_src.evt.gz[events] = 25 counts
[Sun Dec 25 01:55:43 2011] Mean chipx,y = (909.04, 1005.72)
[Sun Dec 25 01:55:43 2011] Mean tdetx,y = (4066.72, 3176.96)
[Sun Dec 25 01:55:43 2011] chipx,y range = (889.00-927.00, 990.00-1022.00)
[Sun Dec 25 01:55:43 2011] Size of ../../acisf13469/products/events/fullrun_ccd2_acisf13469_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 16 counts
[Sun Dec 25 01:55:44 2011] Not generating rmf since there are only 24 counts
[Sun Dec 25 01:55:44 2011] arf not found, will run specextract
[Sun Dec 25 01:56:17 2011] ../../acisf13469/products/spectra/fullrun_ccd2_acisf13469_pi14-548_pass1_cl_src23.warf not found
[Sun Dec 25 01:56:17 2011] ../../acisf13469/products/spectra/fullrun_ccd2_acisf13469_pi14-548_pass1_cl_src23.wrmf not found
[Sun Dec 25 01:56:17 2011] Removal of ../../acisf13469/products/spectra/fullrun_ccd2_acisf13469_pi14-548_pass1_cl_src23.soff failed
[Sun Dec 25 02:07:09 2011] Spectrum 23 has only 24 counts, deleting rmf
[Sun Dec 25 02:07:09 2011] 167.734
[Sun Dec 25 02:27:14 2011] Updating aperture counts using extracted products
[Sun Dec 25 02:27:14 2011] Error reading totcts from fullrun_ccd2_acisf13469_pi14-548_pass1_cl_src23_src.pi.gz
[Sun Dec 25 02:27:15 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 02:27:15 2011] Using photon index=1.80, rate=0.000299, arf fullrun_ccd2_acisf13469_pi14-548_pass1_cl_src23.arf
[Sun Dec 25 02:27:15 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Dec 25 02:27:15 2011] Updating source flux to 4.4e-15
[Sun Dec 25 02:27:29 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting