[Mon Jun 10 16:25:20 2013] Detection parameters:
  Position = (261.3, 1035.4) = 2 13 5.62 -47 0 41.0
  Extent = 0.5" x 0.5", rotation angle = 112 degrees
  Source counts = 24.3 +/- 5.0
  Background counts = 0.7
  Rate = 0.0009 +/- 0.0002

[Mon Jun 10 16:25:20 2013] Off-axis axis estimate = 5.51'
[Mon Jun 10 17:15:46 2013] Using EEF radius (= 1.40 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 17:15:46 2013] Initial guess for spatial extent in simple fitting = 1.40"
[Mon Jun 10 17:15:46 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.101
[Mon Jun 10 17:15:46 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 1.40"
[Mon Jun 10 17:23:45 2013] fullrun_ccd2_acisf13464_pi14-548_cl_pass0_src3.ximg exists
[Mon Jun 10 17:23:45 2013] fullrun_ccd2_acisf13464_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Jun 10 17:23:45 2013] Fit fullrun_ccd2_acisf13464_pi14-548_cl_pass0_src3 appears to have run properly
[Mon Jun 10 17:23:45 2013] fullrun_ccd2_acisf13464_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun 10 17:23:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13464_pi14-548_cl_pass0_tfrozen_src3.csv
[Mon Jun 10 17:23:45 2013] fullrun_ccd2_acisf13464_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun 10 17:23:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13464_pi14-548_cl_pass0_tfrozen_src3.csv
[Mon Jun 10 17:23:45 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13464_pi14-548_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13464_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:34:30 2013] Spatial fit model total counts = 21.952000, observed total counts = 25.000000
[Mon Jun 10 18:34:30 2013] Offset between fit and detection position for source 5 = 0.212151 pixels
[Mon Jun 10 18:34:30 2013] 21.075000 total counts/ 0.000000 bgd. counts: snr = 854511588074279.375000
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.212151 pixels
  Position = (261.2, 1035.6) = 2 13 5.65 -47 0 41.2
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 21.1 +/- 4.6
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Mon Jun 10 18:34:30 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:34:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:34:30 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 18:34:30 2013] Source does appear to be extended
[Mon Jun 10 18:34:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:08:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:08:58 2013] Initial guess for spatial extent in simple fitting = 0.86"
[Mon Jun 10 19:08:58 2013] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.991
[Mon Jun 10 19:08:58 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 0.86"
[Mon Jun 10 19:17:17 2013] fullrun_ccd2_acisf13464_pi14-548_cl_pass1_src3.ximg exists
[Mon Jun 10 19:17:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13464_pi14-548_cl_pass1_src3.csv
[Mon Jun 10 19:17:17 2013] fullrun_ccd2_acisf13464_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Jun 10 19:17:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13464_pi14-548_cl_pass1_src3.csv
[Mon Jun 10 19:17:17 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13464_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13464_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:17:17 2013] fullrun_ccd2_acisf13464_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Jun 10 19:17:17 2013] fullrun_ccd2_acisf13464_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jun 10 19:17:17 2013] Fit fullrun_ccd2_acisf13464_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Jun 10 20:23:05 2013] Spatial fit model total counts = 23.066100, observed total counts = 25.000000
[Mon Jun 10 20:23:05 2013] Offset between fit and detection position for source 5 = 0.310831 pixels
[Mon Jun 10 20:23:05 2013] 21.422000 total counts/ 0.000000 bgd. counts: snr = 351195901265397.062500
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.310831 pixels
  Position = (261.3, 1035.9) = 2 13 5.64 -47 0 41.1
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 21.4 +/- 4.6
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Mon Jun 10 20:23:05 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 20:23:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 20:23:05 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 20:23:05 2013] Source does appear to be extended
[Mon Jun 10 20:23:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 20:31:53 2013] Writing source region out to fullrun_ccd2_acisf13464_pi14-548_pass1_cl_src5_src.reg
[Mon Jun 10 20:31:53 2013] Extracting stamp from image fullrun_ccd2_acisf13464_pi14-548_cl_sm2.00.img.gz, (227, 1002) - (295, 1070)
[Mon Jun 10 20:31:53 2013] Writing fullrun_ccd2_acisf13464_pi14-548_pass1_cl_src5.gif
[Mon Jun 10 20:33:00 2013] Size of ../../acisf13464/products/events/fullrun_ccd2_acisf13464_pi14-548_pass1_cl_src5_src.evt.gz[events] = 23 counts
[Mon Jun 10 20:33:00 2013] Mean chipx,y = (1002.13, 744.52)
[Mon Jun 10 20:33:00 2013] Mean tdetx,y = (3805.52, 3083.87)
[Mon Jun 10 20:33:00 2013] chipx,y range = (987.00-1014.00, 724.00-762.00)
[Mon Jun 10 20:33:00 2013] Size of ../../acisf13464/products/events/fullrun_ccd2_acisf13464_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 2 counts
[Mon Jun 10 20:33:01 2013] Not generating rmf since there are only 21 counts
[Mon Jun 10 20:33:01 2013] arf not found, will run specextract
[Mon Jun 10 20:33:27 2013] ../../acisf13464/products/spectra/fullrun_ccd2_acisf13464_pi14-548_pass1_cl_src5.warf not found
[Mon Jun 10 20:33:27 2013] ../../acisf13464/products/spectra/fullrun_ccd2_acisf13464_pi14-548_pass1_cl_src5.wrmf not found
[Mon Jun 10 20:33:27 2013] Removal of ../../acisf13464/products/spectra/fullrun_ccd2_acisf13464_pi14-548_pass1_cl_src5.soff failed
[Mon Jun 10 20:40:06 2013] Spectrum 5 has only 21 counts, deleting rmf
[Mon Jun 10 20:40:06 2013] 154.686
[Mon Jun 10 20:57:47 2013] Updating aperture counts using extracted products
[Mon Jun 10 20:57:47 2013] Total counts from fullrun_ccd2_acisf13464_pi14-548_pass1_cl_src5_src.pi.gz = 23.00
[Mon Jun 10 20:57:48 2013] Total counts from fullrun_ccd2_acisf13464_pi14-548_pass1_cl_src5_bgd.pi.gz = 2.00
[Mon Jun 10 20:57:48 2013] Got source and background scale factors 0.000002, 0.000020
[Mon Jun 10 20:57:48 2013] User source parameters:
  Position = (261.3, 1035.9) = 2 13 5.64 -47 0 41.1
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source aperture counts = 22.8 +/- 5.9
  Background aperture counts = 0.2
  Rate = 0.0008 +/- 0.0002

[Mon Jun 10 20:57:49 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 20:57:49 2013] Using photon index=1.80, rate=0.000765, arf fullrun_ccd2_acisf13464_pi14-548_pass1_cl_src5.arf
[Mon Jun 10 20:57:49 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Jun 10 20:57:49 2013] Updating source flux to 1.2e-14
[Mon Jun 10 20:58:00 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting