[Fri Feb 17 06:07:18 2012] Detection parameters:
  Position = (410.5, 226.5) = 1 1 19.17 -22 3 53.8
  Extent = 0.5" x 0.5", rotation angle = 93 degrees
  Source counts = 18.8 +/- 4.5
  Background counts = 1.2
  Rate = 0.0003 +/- 6e-05

[Fri Feb 17 06:07:20 2012] Off-axis axis estimate = 1.55'
[Fri Feb 17 07:14:25 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 07:14:25 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Fri Feb 17 07:14:25 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.326
[Fri Feb 17 07:14:25 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 0.39"
[Fri Feb 17 07:59:22 2012] fullrun_ccd3_acisf13457_pi14-548_cl_pass0_src17.ximg exists
[Fri Feb 17 07:59:22 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf13457_pi14-548_cl_pass0_src17.csv
[Fri Feb 17 07:59:22 2012] fullrun_ccd3_acisf13457_pi14-548_cl_pass0_src17_1.ximg exists
[Fri Feb 17 07:59:22 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf13457_pi14-548_cl_pass0_src17.csv
[Fri Feb 17 07:59:22 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13457_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13457_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 07:59:22 2012] fullrun_ccd3_acisf13457_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Fri Feb 17 07:59:22 2012] fullrun_ccd3_acisf13457_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Feb 17 07:59:22 2012] Fit fullrun_ccd3_acisf13457_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Feb 17 07:59:35 2012] Spatial fit model total counts = 25.998200, observed total counts = 26.000000
[Fri Feb 17 07:59:35 2012] Offset between fit and detection position for source 7 = 0.456922 pixels
[Fri Feb 17 07:59:35 2012] 26.243230 total counts/ 8.159030 bgd. counts: snr = 6.331113
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.456922 pixels
  Position = (410.9, 226.6) = 1 1 19.18 -22 3 54.0
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 18.1 +/- 5.1
  Background counts = 8.2
  Rate = 0.0003 +/- 7e-05
[Fri Feb 17 07:59:35 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 07:59:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 07:59:35 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 07:59:35 2012] Source does appear to be extended
[Fri Feb 17 07:59:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 09:07:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 09:07:06 2012] Initial guess for spatial extent in simple fitting = 0.30"
[Fri Feb 17 09:07:06 2012] source mask rpix=0.6, npix_max = 4, mask sum = 4, frac = 0.822
[Fri Feb 17 09:07:06 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 0.30"
[Fri Feb 17 09:41:50 2012] fullrun_ccd3_acisf13457_pi14-548_cl_pass1_src17.ximg exists
[Fri Feb 17 09:41:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13457_pi14-548_cl_pass1_src17.csv
[Fri Feb 17 09:41:50 2012] fullrun_ccd3_acisf13457_pi14-548_cl_pass1_src17_1.ximg exists
[Fri Feb 17 09:41:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13457_pi14-548_cl_pass1_src17.csv
[Fri Feb 17 09:41:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13457_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13457_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 09:41:50 2012] fullrun_ccd3_acisf13457_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Fri Feb 17 09:41:50 2012] fullrun_ccd3_acisf13457_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Feb 17 09:41:50 2012] Fit fullrun_ccd3_acisf13457_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Feb 17 09:42:03 2012] Spatial fit model total counts = 24.474500, observed total counts = 25.000000
[Fri Feb 17 09:42:03 2012] Offset between fit and detection position for source 7 = 0.003890 pixels
[Fri Feb 17 09:42:03 2012] 25.545380 total counts/ 6.979280 bgd. counts: snr = 7.027735
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.003890 pixels
  Position = (410.9, 226.6) = 1 1 19.18 -22 3 54.0
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 18.6 +/- 5.1
  Background counts = 7.0
  Rate = 0.0003 +/- 7e-05
[Fri Feb 17 09:42:03 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 09:42:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 09:42:03 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 09:42:03 2012] Source does appear to be extended
[Fri Feb 17 09:42:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 10:23:05 2012] Writing source region out to fullrun_ccd3_acisf13457_pi14-548_pass1_cl_src7_src.reg
[Fri Feb 17 10:23:05 2012] Extracting stamp from image fullrun_ccd3_acisf13457_pi14-548_cl_sm2.00.img.gz, (397, 213) - (425, 240)
[Fri Feb 17 10:23:05 2012] Writing fullrun_ccd3_acisf13457_pi14-548_pass1_cl_src7.gif
[Fri Feb 17 10:32:26 2012] Size of ../../acisf13457/products/events/fullrun_ccd3_acisf13457_pi14-548_pass1_cl_src7_src.evt.gz[events] = 19 counts
[Fri Feb 17 10:32:26 2012] Mean chipx,y = (846.05, 874.11)
[Fri Feb 17 10:32:26 2012] Mean tdetx,y = (4257.89, 3907.05)
[Fri Feb 17 10:32:26 2012] chipx,y range = (827.00-863.00, 854.00-884.00)
[Fri Feb 17 10:32:26 2012] Size of ../../acisf13457/products/events/fullrun_ccd3_acisf13457_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 4 counts
[Fri Feb 17 10:32:27 2012] Not generating rmf since there are only 18 counts
[Fri Feb 17 10:32:27 2012] arf not found, will run specextract
[Fri Feb 17 10:33:00 2012] ../../acisf13457/products/spectra/fullrun_ccd3_acisf13457_pi14-548_pass1_cl_src7.warf not found
[Fri Feb 17 10:33:00 2012] ../../acisf13457/products/spectra/fullrun_ccd3_acisf13457_pi14-548_pass1_cl_src7.wrmf not found
[Fri Feb 17 10:33:00 2012] Removal of ../../acisf13457/products/spectra/fullrun_ccd3_acisf13457_pi14-548_pass1_cl_src7.soff failed
[Fri Feb 17 10:40:36 2012] Spectrum 7 has only 19 counts, deleting rmf
[Fri Feb 17 10:40:36 2012] 200.138
[Fri Feb 17 10:40:41 2012] Updating aperture counts using extracted products
[Fri Feb 17 10:40:41 2012] Error reading totcts from fullrun_ccd3_acisf13457_pi14-548_pass1_cl_src7_src.pi.gz
[Fri Feb 17 10:40:42 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 10:40:42 2012] Using photon index=1.80, rate=0.000269, arf fullrun_ccd3_acisf13457_pi14-548_pass1_cl_src7.arf
[Fri Feb 17 10:40:42 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 10:40:42 2012] Updating source flux to 3.2e-15
[Fri Feb 17 10:40:57 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting