[Fri Feb 17 06:07:19 2012] Detection parameters:
  Position = (309.2, 87.6) = 1 1 22.76 -22 5 2.2
  Extent = 0.5" x 0.5", rotation angle = 100 degrees
  Source counts = 14.2 +/- 3.9
  Background counts = 0.8
  Rate = 0.0002 +/- 6e-05

[Fri Feb 17 06:07:20 2012] Off-axis axis estimate = 0.14'
[Fri Feb 17 07:14:25 2012] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 07:14:25 2012] Initial guess for spatial extent in simple fitting = 0.42"
[Fri Feb 17 07:14:25 2012] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.238
[Fri Feb 17 07:14:25 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 0.42"
[Fri Feb 17 07:59:22 2012] fullrun_ccd3_acisf13457_pi14-548_cl_pass0_src23.ximg exists
[Fri Feb 17 07:59:22 2012] fullrun_ccd3_acisf13457_pi14-548_cl_pass0_src23_1.ximg exists
[Fri Feb 17 07:59:22 2012] Fit fullrun_ccd3_acisf13457_pi14-548_cl_pass0_src23 appears to have run properly
[Fri Feb 17 07:59:22 2012] fullrun_ccd3_acisf13457_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Fri Feb 17 07:59:22 2012] fullrun_ccd3_acisf13457_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Feb 17 07:59:22 2012] Fit fullrun_ccd3_acisf13457_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Fri Feb 17 07:59:35 2012] Spatial fit model total counts = 16.266800, observed total counts = 17.000000
[Fri Feb 17 07:59:35 2012] Offset between fit and detection position for source 34 = 0.723494 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.723494 pixels
  Position = (309.7, 88.1) = 1 1 22.76 -22 5 2.2
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 15.6 +/- 4.0
  Background counts = 0.0
  Rate = 0.0002 +/- 6e-05
[Fri Feb 17 07:59:35 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 07:59:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 07:59:35 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 07:59:35 2012] Source does appear to be extended
[Fri Feb 17 07:59:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 09:07:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 09:07:06 2012] Initial guess for spatial extent in simple fitting = 0.52"
[Fri Feb 17 09:07:06 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.928
[Fri Feb 17 09:07:06 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 0.52"
[Fri Feb 17 09:41:50 2012] fullrun_ccd3_acisf13457_pi14-548_cl_pass1_src23.ximg exists
[Fri Feb 17 09:41:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13457_pi14-548_cl_pass1_src23.csv
[Fri Feb 17 09:41:50 2012] fullrun_ccd3_acisf13457_pi14-548_cl_pass1_src23_1.ximg exists
[Fri Feb 17 09:41:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13457_pi14-548_cl_pass1_src23.csv
[Fri Feb 17 09:41:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13457_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13457_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 09:41:50 2012] fullrun_ccd3_acisf13457_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Fri Feb 17 09:41:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13457_pi14-548_cl_pass1_tfrozen_src23.csv
[Fri Feb 17 09:41:50 2012] fullrun_ccd3_acisf13457_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Feb 17 09:41:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13457_pi14-548_cl_pass1_tfrozen_src23.csv
[Fri Feb 17 09:41:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13457_pi14-548_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13457_pi14-548_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 09:42:03 2012] Spatial fit model total counts = 15.566200, observed total counts = 17.000000
[Fri Feb 17 09:42:03 2012] Offset between fit and detection position for source 34 = 0.013711 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.013711 pixels
  Position = (309.7, 88.1) = 1 1 22.76 -22 5 2.2
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 14.9 +/- 3.9
  Background counts = 0.0
  Rate = 0.0002 +/- 6e-05
[Fri Feb 17 09:42:04 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 09:42:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 09:42:04 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 09:42:04 2012] Source does appear to be extended
[Fri Feb 17 09:42:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 10:23:05 2012] Writing source region out to fullrun_ccd3_acisf13457_pi14-548_pass1_cl_src34_src.reg
[Fri Feb 17 10:23:05 2012] Extracting stamp from image fullrun_ccd3_acisf13457_pi14-548_cl_sm2.00.img.gz, (287, 65) - (333, 111)
[Fri Feb 17 10:23:05 2012] Writing fullrun_ccd3_acisf13457_pi14-548_pass1_cl_src34.gif
[Fri Feb 17 10:35:45 2012] Size of ../../acisf13457/products/events/fullrun_ccd3_acisf13457_pi14-548_pass1_cl_src34_src.evt.gz[events] = 15 counts
[Fri Feb 17 10:35:45 2012] Mean chipx,y = (942.20, 998.93)
[Fri Feb 17 10:35:45 2012] Mean tdetx,y = (4133.07, 4003.20)
[Fri Feb 17 10:35:45 2012] chipx,y range = (928.00-963.00, 990.00-1012.00)
[Fri Feb 17 10:35:45 2012] Size of ../../acisf13457/products/events/fullrun_ccd3_acisf13457_pi14-548_pass1_cl_src34_bgd.evt.gz[events] = 8 counts
[Fri Feb 17 10:35:46 2012] Not generating rmf since there are only 14 counts
[Fri Feb 17 10:35:46 2012] arf not found, will run specextract
[Fri Feb 17 10:36:15 2012] ../../acisf13457/products/spectra/fullrun_ccd3_acisf13457_pi14-548_pass1_cl_src34.warf not found
[Fri Feb 17 10:36:15 2012] ../../acisf13457/products/spectra/fullrun_ccd3_acisf13457_pi14-548_pass1_cl_src34.wrmf not found
[Fri Feb 17 10:36:15 2012] Removal of ../../acisf13457/products/spectra/fullrun_ccd3_acisf13457_pi14-548_pass1_cl_src34.soff failed
[Fri Feb 17 10:40:36 2012] Spectrum 34 has only 15 counts, deleting rmf
[Fri Feb 17 10:40:36 2012] 174.44
[Fri Feb 17 10:40:41 2012] Updating aperture counts using extracted products
[Fri Feb 17 10:40:41 2012] Error reading totcts from fullrun_ccd3_acisf13457_pi14-548_pass1_cl_src34_src.pi.gz
[Fri Feb 17 10:40:42 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 10:40:42 2012] Using photon index=1.80, rate=0.000215, arf fullrun_ccd3_acisf13457_pi14-548_pass1_cl_src34.arf
[Fri Feb 17 10:40:42 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 10:40:42 2012] Updating source flux to 2.9e-15
[Fri Feb 17 10:40:57 2012] Source 34 has fewer than 100.000000 counts, skipping spectral fitting