[Fri Feb 17 06:07:17 2012] Detection parameters:
  Position = (1151.2, 437.8) = 1 1 28.14 -22 4 51.7
  Extent = 0.5" x 0.5", rotation angle = 54 degrees
  Source counts = 37.8 +/- 6.2
  Background counts = 1.2
  Rate = 0.0005 +/- 9e-05

[Fri Feb 17 06:07:17 2012] Off-axis axis estimate = 1.18'
[Fri Feb 17 07:00:06 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 07:00:06 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Feb 17 07:00:06 2012] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.615
[Fri Feb 17 07:00:06 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 0.38"
[Fri Feb 17 07:14:25 2012] fullrun_ccd2_acisf13457_pi14-548_cl_pass0_src5.ximg exists
[Fri Feb 17 07:14:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13457_pi14-548_cl_pass0_src5.csv
[Fri Feb 17 07:14:25 2012] fullrun_ccd2_acisf13457_pi14-548_cl_pass0_src5_1.ximg exists
[Fri Feb 17 07:14:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13457_pi14-548_cl_pass0_src5.csv
[Fri Feb 17 07:14:25 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13457_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13457_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 07:14:25 2012] fullrun_ccd2_acisf13457_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri Feb 17 07:14:25 2012] fullrun_ccd2_acisf13457_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Feb 17 07:14:25 2012] Fit fullrun_ccd2_acisf13457_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Feb 17 07:59:32 2012] Spatial fit model total counts = 42.367900, observed total counts = 43.000000
[Fri Feb 17 07:59:32 2012] Offset between fit and detection position for source 4 = 0.642825 pixels
[Fri Feb 17 07:59:32 2012] 43.270860 total counts/ 4.453360 bgd. counts: snr = 18.394317
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.642825 pixels
  Position = (1151.7, 438.2) = 1 1 28.14 -22 4 51.8
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 38.8 +/- 6.6
  Background counts = 4.5
  Rate = 0.0006 +/- 0.0001
[Fri Feb 17 07:59:32 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 07:59:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 07:59:32 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 07:59:32 2012] Source does appear to be extended
[Fri Feb 17 07:59:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 08:56:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 08:56:23 2012] Initial guess for spatial extent in simple fitting = 0.46"
[Fri Feb 17 08:56:23 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.106
[Fri Feb 17 08:56:23 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 0.46"
[Fri Feb 17 09:07:06 2012] fullrun_ccd2_acisf13457_pi14-548_cl_pass1_src5.ximg exists
[Fri Feb 17 09:07:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13457_pi14-548_cl_pass1_src5.csv
[Fri Feb 17 09:07:06 2012] fullrun_ccd2_acisf13457_pi14-548_cl_pass1_src5_1.ximg exists
[Fri Feb 17 09:07:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13457_pi14-548_cl_pass1_src5.csv
[Fri Feb 17 09:07:06 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13457_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13457_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 09:07:06 2012] fullrun_ccd2_acisf13457_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Fri Feb 17 09:07:06 2012] fullrun_ccd2_acisf13457_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Feb 17 09:07:06 2012] Fit fullrun_ccd2_acisf13457_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Feb 17 09:42:00 2012] Spatial fit model total counts = 43.078600, observed total counts = 43.000000
[Fri Feb 17 09:42:00 2012] Offset between fit and detection position for source 4 = 0.009615 pixels
[Fri Feb 17 09:42:00 2012] 44.013640 total counts/ 4.663040 bgd. counts: snr = 18.222870
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.009615 pixels
  Position = (1151.7, 438.2) = 1 1 28.14 -22 4 51.8
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 39.4 +/- 6.6
  Background counts = 4.7
  Rate = 0.0006 +/- 0.0001
[Fri Feb 17 09:42:00 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 09:42:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 09:42:00 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 09:42:00 2012] Source does appear to be extended
[Fri Feb 17 09:42:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 10:10:24 2012] Writing source region out to fullrun_ccd2_acisf13457_pi14-548_pass1_cl_src4_src.reg
[Fri Feb 17 10:10:24 2012] Extracting stamp from image fullrun_ccd2_acisf13457_pi14-548_cl_sm2.00.img.gz, (1131, 417) - (1173, 459)
[Fri Feb 17 10:10:25 2012] Writing fullrun_ccd2_acisf13457_pi14-548_pass1_cl_src4.gif
[Fri Feb 17 10:13:14 2012] Size of ../../acisf13457/products/events/fullrun_ccd2_acisf13457_pi14-548_pass1_cl_src4_src.evt.gz[events] = 40 counts
[Fri Feb 17 10:13:14 2012] Mean chipx,y = (149.50, 923.08)
[Fri Feb 17 10:13:14 2012] Mean tdetx,y = (3984.07, 3936.50)
[Fri Feb 17 10:13:14 2012] chipx,y range = (129.00-166.00, 907.00-941.00)
[Fri Feb 17 10:13:14 2012] Size of ../../acisf13457/products/events/fullrun_ccd2_acisf13457_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 7 counts
[Fri Feb 17 10:13:15 2012] Not generating rmf since there are only 39 counts
[Fri Feb 17 10:13:15 2012] arf not found, will run specextract
[Fri Feb 17 10:13:43 2012] ../../acisf13457/products/spectra/fullrun_ccd2_acisf13457_pi14-548_pass1_cl_src4.warf not found
[Fri Feb 17 10:13:43 2012] ../../acisf13457/products/spectra/fullrun_ccd2_acisf13457_pi14-548_pass1_cl_src4.wrmf not found
[Fri Feb 17 10:13:43 2012] Removal of ../../acisf13457/products/spectra/fullrun_ccd2_acisf13457_pi14-548_pass1_cl_src4.soff failed
[Fri Feb 17 10:23:04 2012] Spectrum 4 has only 39 counts, deleting rmf
[Fri Feb 17 10:23:04 2012] 169.726
[Fri Feb 17 10:40:41 2012] Updating aperture counts using extracted products
[Fri Feb 17 10:40:41 2012] Error reading totcts from fullrun_ccd2_acisf13457_pi14-548_pass1_cl_src4_src.pi.gz
[Fri Feb 17 10:40:41 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 10:40:41 2012] Using photon index=1.80, rate=0.000569, arf fullrun_ccd2_acisf13457_pi14-548_pass1_cl_src4.arf
[Fri Feb 17 10:40:41 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 10:40:41 2012] Updating source flux to 7.9e-15
[Fri Feb 17 10:40:56 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Feb 17 10:40:57 2012] acisf13457/analysis//spectral/fullrun_ccd2_acisf13457_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete