[Fri Feb 17 06:07:15 2012] Detection parameters:
  Position = (497.3, 1090.1) = 1 1 4.78 -22 4 55.0
  Extent = 0.6" x 0.5", rotation angle = 144 degrees
  Source counts = 113.4 +/- 10.8
  Background counts = 2.6
  Rate = 0.002 +/- 0.0002

[Fri Feb 17 06:07:16 2012] Off-axis axis estimate = 4.27'
[Fri Feb 17 06:40:54 2012] Using EEF radius (= 0.92 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 06:40:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 06:40:54 2012] Initial guess for spatial extent in simple fitting = 0.92"
[Fri Feb 17 06:40:54 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.898
[Fri Feb 17 06:40:54 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.92"
[Fri Feb 17 07:00:06 2012] fullrun_ccd1_acisf13457_pi14-548_cl_pass0_src1.ximg exists
[Fri Feb 17 07:00:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13457_pi14-548_cl_pass0_src1.csv
[Fri Feb 17 07:00:06 2012] fullrun_ccd1_acisf13457_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Feb 17 07:00:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13457_pi14-548_cl_pass0_src1.csv
[Fri Feb 17 07:00:06 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13457_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13457_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 07:00:06 2012] fullrun_ccd1_acisf13457_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 17 07:00:06 2012] fullrun_ccd1_acisf13457_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 17 07:00:06 2012] Fit fullrun_ccd1_acisf13457_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 17 07:59:30 2012] Spatial fit model total counts = 116.245000, observed total counts = 121.000000
[Fri Feb 17 07:59:30 2012] Offset between fit and detection position for source 3 = 0.704989 pixels
[Fri Feb 17 07:59:30 2012] 116.124961 total counts/ 0.461961 bgd. counts: snr = 170.173447
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.704989 pixels
  Position = (497.8, 1090.6) = 1 1 4.78 -22 4 55.0
  Extent = 0.7 (0.7-0.8)", rotation angle = 0
  Source counts = 115.7 +/- 10.8
  Background counts = 0.5
  Rate = 0.002 +/- 0.0002
[Fri Feb 17 07:59:30 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 07:59:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 07:59:30 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 07:59:30 2012] Source does appear to be extended
[Fri Feb 17 07:59:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 08:30:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 08:30:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 08:30:43 2012] Initial guess for spatial extent in simple fitting = 0.73"
[Fri Feb 17 08:30:43 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.024
[Fri Feb 17 08:30:43 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.73"
[Fri Feb 17 08:56:22 2012] fullrun_ccd1_acisf13457_pi14-548_cl_pass1_src1.ximg exists
[Fri Feb 17 08:56:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13457_pi14-548_cl_pass1_src1.csv
[Fri Feb 17 08:56:22 2012] fullrun_ccd1_acisf13457_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Feb 17 08:56:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13457_pi14-548_cl_pass1_src1.csv
[Fri Feb 17 08:56:22 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13457_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13457_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 08:56:23 2012] fullrun_ccd1_acisf13457_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 17 08:56:23 2012] fullrun_ccd1_acisf13457_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 17 08:56:23 2012] Fit fullrun_ccd1_acisf13457_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 17 09:41:59 2012] Spatial fit model total counts = 116.309000, observed total counts = 121.000000
[Fri Feb 17 09:41:59 2012] Offset between fit and detection position for source 3 = 0.022594 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.022594 pixels
  Position = (497.8, 1090.6) = 1 1 4.77 -22 4 55.0
  Extent = 0.7 (0.7-0.8)", rotation angle = 0
  Source counts = 116.4 +/- 10.8
  Background counts = 0.0
  Rate = 0.002 +/- 0.0002
[Fri Feb 17 09:41:59 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 09:41:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 09:41:59 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 09:41:59 2012] Source does appear to be extended
[Fri Feb 17 09:41:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 09:58:58 2012] Writing source region out to fullrun_ccd1_acisf13457_pi14-548_pass1_cl_src3_src.reg
[Fri Feb 17 09:58:58 2012] Extracting stamp from image fullrun_ccd1_acisf13457_pi14-548_cl_sm2.00.img.gz, (465, 1058) - (531, 1124)
[Fri Feb 17 09:58:58 2012] Writing fullrun_ccd1_acisf13457_pi14-548_pass1_cl_src3.gif
[Fri Feb 17 09:59:00 2012] Size of ../../acisf13457/products/events/fullrun_ccd1_acisf13457_pi14-548_pass1_cl_src3_src.evt.gz[events] = 116 counts
[Fri Feb 17 09:59:00 2012] Mean chipx,y = (40.91, 521.22)
[Fri Feb 17 09:59:00 2012] Mean tdetx,y = (4610.78, 4147.91)
[Fri Feb 17 09:59:00 2012] chipx,y range = (24.00-66.00, 501.00-539.00)
[Fri Feb 17 09:59:00 2012] Size of ../../acisf13457/products/events/fullrun_ccd1_acisf13457_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 27 counts
[Fri Feb 17 09:59:01 2012] rmf not found, will run specextract
[Fri Feb 17 09:59:01 2012] arf not found, will run specextract
[Fri Feb 17 09:59:29 2012] ../../acisf13457/products/spectra/fullrun_ccd1_acisf13457_pi14-548_pass1_cl_src3.warf not found
[Fri Feb 17 09:59:29 2012] ../../acisf13457/products/spectra/fullrun_ccd1_acisf13457_pi14-548_pass1_cl_src3.wrmf not found
[Fri Feb 17 09:59:29 2012] Removal of ../../acisf13457/products/spectra/fullrun_ccd1_acisf13457_pi14-548_pass1_cl_src3.soff failed
[Fri Feb 17 10:10:24 2012] Keeping rmf generated by specextract
[Fri Feb 17 10:10:24 2012] 184.819
[Fri Feb 17 10:40:40 2012] Updating aperture counts using extracted products
[Fri Feb 17 10:40:40 2012] Error reading totcts from fullrun_ccd1_acisf13457_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Feb 17 10:40:41 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 10:40:41 2012] Using photon index=1.80, rate=0.00168, arf fullrun_ccd1_acisf13457_pi14-548_pass1_cl_src3.arf
[Fri Feb 17 10:40:41 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 10:40:41 2012] Updating source flux to 2.2e-14
[Fri Feb 17 10:40:56 2012] Reading fit data from acisf13457/analysis//spectral/fullrun_ccd1_acisf13457_pi14-548_pass1_cl_src3_pl.csv
[Fri Feb 17 10:40:56 2012] Spectral fit parameter nH value = 4.72106e+20
[Fri Feb 17 10:40:56 2012] Spectral fit parameter PhoIndex value = 1.3572
[Fri Feb 17 10:40:56 2012] Failed to get F(0.3-8.0) from acisf13457/analysis//spectral/fullrun_ccd1_acisf13457_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Feb 17 10:40:56 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 10:40:56 2012] Using Nh = 4.7e+20, photon index=1.36, rate=0.00168, arf fullrun_ccd1_acisf13457_pi14-548_pass1_cl_src3.arf
[Fri Feb 17 10:40:56 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 10:40:56 2012] Updating source flux to 2.4e-14