[Fri Feb 17 06:07:12 2012] Detection parameters:
  Position = (953.6, 1107.9) = 1 1 23.63 -22 7 22.2
  Extent = 0.5" x 0.5", rotation angle = 81 degrees
  Source counts = 38.8 +/- 6.3
  Background counts = 1.2
  Rate = 0.0006 +/- 9e-05

[Fri Feb 17 06:07:13 2012] Off-axis axis estimate = 2.24'
[Fri Feb 17 06:09:37 2012] Using EEF radius (= 0.46 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 06:09:37 2012] Initial guess for spatial extent in simple fitting = 0.46"
[Fri Feb 17 06:09:37 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.102
[Fri Feb 17 06:09:37 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 0.46"
[Fri Feb 17 06:40:53 2012] fullrun_ccd0_acisf13457_pi14-548_cl_pass0_src5.ximg exists
[Fri Feb 17 06:40:53 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf13457_pi14-548_cl_pass0_src5.csv
[Fri Feb 17 06:40:53 2012] fullrun_ccd0_acisf13457_pi14-548_cl_pass0_src5_1.ximg exists
[Fri Feb 17 06:40:53 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf13457_pi14-548_cl_pass0_src5.csv
[Fri Feb 17 06:40:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13457_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13457_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 06:40:53 2012] fullrun_ccd0_acisf13457_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri Feb 17 06:40:53 2012] fullrun_ccd0_acisf13457_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Feb 17 06:40:53 2012] Fit fullrun_ccd0_acisf13457_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Feb 17 07:59:28 2012] Spatial fit model total counts = 43.999000, observed total counts = 44.000000
[Fri Feb 17 07:59:28 2012] Offset between fit and detection position for source 5 = 0.824973 pixels
[Fri Feb 17 07:59:28 2012] 43.654390 total counts/ 4.332590 bgd. counts: snr = 18.891202
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.824973 pixels
  Position = (954.2, 1108.5) = 1 1 23.63 -22 7 22.2
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 39.3 +/- 6.6
  Background counts = 4.3
  Rate = 0.0006 +/- 0.0001
[Fri Feb 17 07:59:28 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 07:59:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 07:59:28 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 07:59:28 2012] Source does appear to be extended
[Fri Feb 17 07:59:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 07:59:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 07:59:53 2012] Initial guess for spatial extent in simple fitting = 0.42"
[Fri Feb 17 07:59:53 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.233
[Fri Feb 17 07:59:53 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 0.42"
[Fri Feb 17 08:30:43 2012] fullrun_ccd0_acisf13457_pi14-548_cl_pass1_src5.ximg exists
[Fri Feb 17 08:30:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13457_pi14-548_cl_pass1_src5.csv
[Fri Feb 17 08:30:43 2012] fullrun_ccd0_acisf13457_pi14-548_cl_pass1_src5_1.ximg exists
[Fri Feb 17 08:30:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13457_pi14-548_cl_pass1_src5.csv
[Fri Feb 17 08:30:43 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13457_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13457_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 08:30:43 2012] fullrun_ccd0_acisf13457_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Fri Feb 17 08:30:43 2012] fullrun_ccd0_acisf13457_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Feb 17 08:30:43 2012] Fit fullrun_ccd0_acisf13457_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Feb 17 09:41:57 2012] Spatial fit model total counts = 44.999200, observed total counts = 45.000000
[Fri Feb 17 09:41:57 2012] Offset between fit and detection position for source 5 = 0.017289 pixels
[Fri Feb 17 09:41:57 2012] 45.203000 total counts/ 6.267200 bgd. counts: snr = 15.552934
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.017289 pixels
  Position = (954.2, 1108.5) = 1 1 23.63 -22 7 22.2
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 38.9 +/- 6.7
  Background counts = 6.3
  Rate = 0.0006 +/- 0.0001
[Fri Feb 17 09:41:57 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 09:41:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 09:41:57 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 09:41:57 2012] Source does appear to be extended
[Fri Feb 17 09:41:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 09:42:22 2012] Writing source region out to fullrun_ccd0_acisf13457_pi14-548_pass1_cl_src5_src.reg
[Fri Feb 17 09:42:22 2012] Extracting stamp from image fullrun_ccd0_acisf13457_pi14-548_cl_sm2.00.img.gz, (935, 1090) - (973, 1127)
[Fri Feb 17 09:42:22 2012] Writing fullrun_ccd0_acisf13457_pi14-548_pass1_cl_src5.gif
[Fri Feb 17 09:44:42 2012] Size of ../../acisf13457/products/events/fullrun_ccd0_acisf13457_pi14-548_pass1_cl_src5_src.evt.gz[events] = 40 counts
[Fri Feb 17 09:44:42 2012] Mean chipx,y = (863.17, 951.85)
[Fri Feb 17 09:44:42 2012] Mean tdetx,y = (4012.85, 4268.82)
[Fri Feb 17 09:44:42 2012] chipx,y range = (844.00-882.00, 932.00-967.00)
[Fri Feb 17 09:44:42 2012] Size of ../../acisf13457/products/events/fullrun_ccd0_acisf13457_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 7 counts
[Fri Feb 17 09:44:43 2012] Not generating rmf since there are only 38 counts
[Fri Feb 17 09:44:43 2012] arf not found, will run specextract
[Fri Feb 17 09:45:10 2012] ../../acisf13457/products/spectra/fullrun_ccd0_acisf13457_pi14-548_pass1_cl_src5.warf not found
[Fri Feb 17 09:45:10 2012] ../../acisf13457/products/spectra/fullrun_ccd0_acisf13457_pi14-548_pass1_cl_src5.wrmf not found
[Fri Feb 17 09:45:10 2012] Removal of ../../acisf13457/products/spectra/fullrun_ccd0_acisf13457_pi14-548_pass1_cl_src5.soff failed
[Fri Feb 17 09:58:58 2012] Spectrum 5 has only 39 counts, deleting rmf
[Fri Feb 17 09:58:58 2012] 200.787
[Fri Feb 17 10:40:40 2012] Updating aperture counts using extracted products
[Fri Feb 17 10:40:40 2012] Error reading totcts from fullrun_ccd0_acisf13457_pi14-548_pass1_cl_src5_src.pi.gz
[Fri Feb 17 10:40:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 10:40:40 2012] Using photon index=1.80, rate=0.000563, arf fullrun_ccd0_acisf13457_pi14-548_pass1_cl_src5.arf
[Fri Feb 17 10:40:40 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 10:40:40 2012] Updating source flux to 6.7e-15
[Fri Feb 17 10:40:46 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting