[Tue Feb 14 08:51:21 2012] Detection parameters:
  Position = (574.1, 901.4) = 1 2 50.82 -22 11 3.4
  Extent = 0.9" x 0.6", rotation angle = 53 degrees
  Source counts = 1131.6 +/- 33.9
  Background counts = 19.4
  Rate = 0.008 +/- 0.0003

[Tue Feb 14 08:51:22 2012] Off-axis axis estimate = 4.55'
[Tue Feb 14 08:54:52 2012] Using EEF radius (= 1.01 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 08:54:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 14 08:54:52 2012] Initial guess for spatial extent in simple fitting = 1.01"
[Tue Feb 14 08:54:52 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.958
[Tue Feb 14 08:54:52 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 1.01"
[Tue Feb 14 09:39:00 2012] fullrun_ccd0_acisf13456_pi14-548_cl_pass0_src1.ximg exists
[Tue Feb 14 09:39:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13456_pi14-548_cl_pass0_src1.csv
[Tue Feb 14 09:39:00 2012] fullrun_ccd0_acisf13456_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Feb 14 09:39:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13456_pi14-548_cl_pass0_src1.csv
[Tue Feb 14 09:39:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13456_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13456_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 09:39:00 2012] fullrun_ccd0_acisf13456_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Feb 14 09:39:00 2012] fullrun_ccd0_acisf13456_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Feb 14 09:39:00 2012] Fit fullrun_ccd0_acisf13456_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Feb 14 12:08:36 2012] Spatial fit model total counts = 1158.920000, observed total counts = 1169.000000
[Tue Feb 14 12:08:36 2012] Offset between fit and detection position for source 1 = 0.619231 pixels
[Tue Feb 14 12:08:36 2012] 1162.491000 total counts/ 117.781000 bgd. counts: snr = 96.262721
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.619231 pixels
  Position = (574.5, 901.9) = 1 2 50.82 -22 11 3.4
  Extent = 0.9 (0.9-0.9)", rotation angle = 0
  Source counts = 1044.7 +/- 34.1
  Background counts = 117.8
  Rate = 0.008 +/- 0.0003
[Tue Feb 14 12:08:36 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 12:08:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 12:08:36 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 12:08:36 2012] Source does appear to be extended
[Tue Feb 14 12:08:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 12:09:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 14 12:09:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 14 12:09:09 2012] Initial guess for spatial extent in simple fitting = 0.92"
[Tue Feb 14 12:09:09 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.120
[Tue Feb 14 12:09:09 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.92"
[Tue Feb 14 12:39:44 2012] fullrun_ccd0_acisf13456_pi14-548_cl_pass1_src1.ximg exists
[Tue Feb 14 12:39:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13456_pi14-548_cl_pass1_src1.csv
[Tue Feb 14 12:39:44 2012] fullrun_ccd0_acisf13456_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Feb 14 12:39:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13456_pi14-548_cl_pass1_src1.csv
[Tue Feb 14 12:39:44 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13456_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13456_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 12:39:44 2012] fullrun_ccd0_acisf13456_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Feb 14 12:39:44 2012] fullrun_ccd0_acisf13456_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Feb 14 12:39:44 2012] Fit fullrun_ccd0_acisf13456_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Feb 14 15:26:02 2012] Spatial fit model total counts = 1160.000000, observed total counts = 1160.000000
[Tue Feb 14 15:26:02 2012] Offset between fit and detection position for source 1 = 0.003896 pixels
[Tue Feb 14 15:26:02 2012] 1162.894000 total counts/ 122.064000 bgd. counts: snr = 94.207614
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.003896 pixels
  Position = (574.5, 901.9) = 1 2 50.82 -22 11 3.4
  Extent = 0.9 (0.9-0.9)", rotation angle = 0
  Source counts = 1040.8 +/- 34.1
  Background counts = 122.1
  Rate = 0.008 +/- 0.0003
[Tue Feb 14 15:26:02 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 15:26:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 15:26:02 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 15:26:02 2012] Source does appear to be extended
[Tue Feb 14 15:26:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 15:26:37 2012] Writing source region out to fullrun_ccd0_acisf13456_pi14-548_pass1_cl_src1_src.reg
[Tue Feb 14 15:26:37 2012] Extracting stamp from image fullrun_ccd0_acisf13456_pi14-548_cl_sm2.00.img.gz, (533, 861) - (616, 943)
[Tue Feb 14 15:26:37 2012] Writing fullrun_ccd0_acisf13456_pi14-548_pass1_cl_src1.gif
[Tue Feb 14 15:26:39 2012] Size of ../../acisf13456/products/events/fullrun_ccd0_acisf13456_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1143 counts
[Tue Feb 14 15:26:39 2012] Mean chipx,y = (863.36, 556.79)
[Tue Feb 14 15:26:39 2012] Mean tdetx,y = (3617.79, 4268.64)
[Tue Feb 14 15:26:39 2012] chipx,y range = (839.00-885.00, 534.00-579.00)
[Tue Feb 14 15:26:39 2012] Size of ../../acisf13456/products/events/fullrun_ccd0_acisf13456_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 98 counts
[Tue Feb 14 15:26:40 2012] rmf not found, will run specextract
[Tue Feb 14 15:26:40 2012] arf not found, will run specextract
[Tue Feb 14 15:27:08 2012] ../../acisf13456/products/spectra/fullrun_ccd0_acisf13456_pi14-548_pass1_cl_src1.warf not found
[Tue Feb 14 15:27:08 2012] ../../acisf13456/products/spectra/fullrun_ccd0_acisf13456_pi14-548_pass1_cl_src1.wrmf not found
[Tue Feb 14 15:27:08 2012] Removal of ../../acisf13456/products/spectra/fullrun_ccd0_acisf13456_pi14-548_pass1_cl_src1.soff failed
[Tue Feb 14 15:42:28 2012] Keeping rmf generated by specextract
[Tue Feb 14 15:42:28 2012] 188.049
[Tue Feb 14 16:36:44 2012] Updating aperture counts using extracted products
[Tue Feb 14 16:36:44 2012] Error reading totcts from fullrun_ccd0_acisf13456_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Feb 14 16:36:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 16:36:45 2012] Using photon index=1.80, rate=0.00767, arf fullrun_ccd0_acisf13456_pi14-548_pass1_cl_src1.arf
[Tue Feb 14 16:36:45 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 14 16:36:45 2012] Updating source flux to 9.7e-14
[Tue Feb 14 16:37:14 2012] Reading fit data from acisf13456/analysis//spectral/fullrun_ccd0_acisf13456_pi14-548_pass1_cl_src1_pl.csv
[Tue Feb 14 16:37:14 2012] Spectral fit parameter nH value = 3.50877e+20
[Tue Feb 14 16:37:14 2012] Spectral fit parameter PhoIndex value = 1.82815
[Tue Feb 14 16:37:14 2012] Failed to get F(0.3-8.0) from acisf13456/analysis//spectral/fullrun_ccd0_acisf13456_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Feb 14 16:37:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 16:37:14 2012] Using Nh = 3.5e+20, photon index=1.83, rate=0.00767, arf fullrun_ccd0_acisf13456_pi14-548_pass1_cl_src1.arf
[Tue Feb 14 16:37:14 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 14 16:37:14 2012] Updating source flux to 9.4e-14