[Wed Feb 15 14:37:10 2012] Detection parameters:
  Position = (621.3, 186.7) = 1 3 43.83 -21 53 58.4
  Extent = 0.5" x 0.5", rotation angle = 129 degrees
  Source counts = 341.7 +/- 18.5
  Background counts = 2.3
  Rate = 0.005 +/- 0.0003

[Wed Feb 15 14:37:10 2012] Off-axis axis estimate = 3.28'
[Wed Feb 15 15:37:28 2012] Using EEF radius (= 0.64 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 15:37:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 15 15:37:28 2012] Initial guess for spatial extent in simple fitting = 0.64"
[Wed Feb 15 15:37:28 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.927
[Wed Feb 15 15:37:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.64"
[Wed Feb 15 16:09:27 2012] fullrun_ccd3_acisf13455_pi14-548_cl_pass0_src1.ximg exists
[Wed Feb 15 16:09:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13455_pi14-548_cl_pass0_src1.csv
[Wed Feb 15 16:09:27 2012] fullrun_ccd3_acisf13455_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Feb 15 16:09:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13455_pi14-548_cl_pass0_src1.csv
[Wed Feb 15 16:09:27 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13455_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13455_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 16:09:27 2012] fullrun_ccd3_acisf13455_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Feb 15 16:09:27 2012] fullrun_ccd3_acisf13455_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Feb 15 16:09:27 2012] Fit fullrun_ccd3_acisf13455_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Feb 15 16:56:47 2012] Spatial fit model total counts = 359.982000, observed total counts = 360.000000
[Wed Feb 15 16:56:47 2012] Offset between fit and detection position for source 32 = 0.710835 pixels
[Wed Feb 15 16:56:47 2012] 359.158400 total counts/ 11.828400 bgd. counts: snr = 100.990215
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.710835 pixels
  Position = (621.8, 187.2) = 1 3 43.83 -21 53 58.4
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 347.3 +/- 19.0
  Background counts = 11.8
  Rate = 0.005 +/- 0.0003
[Wed Feb 15 16:56:47 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 16:56:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 16:56:47 2012] Assessing source extent using major axis lower bound
[Wed Feb 15 16:56:47 2012] Source does appear to be extended
[Wed Feb 15 16:56:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 17:44:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 15 17:44:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 15 17:44:29 2012] Initial guess for spatial extent in simple fitting = 0.50"
[Wed Feb 15 17:44:29 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.977
[Wed Feb 15 17:44:29 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.50"
[Wed Feb 15 18:13:36 2012] fullrun_ccd3_acisf13455_pi14-548_cl_pass1_src1.ximg exists
[Wed Feb 15 18:13:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13455_pi14-548_cl_pass1_src1.csv
[Wed Feb 15 18:13:36 2012] fullrun_ccd3_acisf13455_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Feb 15 18:13:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13455_pi14-548_cl_pass1_src1.csv
[Wed Feb 15 18:13:36 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13455_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13455_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 18:13:36 2012] fullrun_ccd3_acisf13455_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Feb 15 18:13:36 2012] fullrun_ccd3_acisf13455_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Feb 15 18:13:36 2012] Fit fullrun_ccd3_acisf13455_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Feb 15 18:47:11 2012] Spatial fit model total counts = 358.986000, observed total counts = 360.000000
[Wed Feb 15 18:47:11 2012] Offset between fit and detection position for source 32 = 0.003119 pixels
[Wed Feb 15 18:47:11 2012] 357.722900 total counts/ 11.561900 bgd. counts: snr = 101.803693
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.003119 pixels
  Position = (621.8, 187.2) = 1 3 43.83 -21 53 58.4
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 346.2 +/- 18.9
  Background counts = 11.6
  Rate = 0.005 +/- 0.0003
[Wed Feb 15 18:47:11 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 18:47:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 18:47:11 2012] Assessing source extent using major axis lower bound
[Wed Feb 15 18:47:11 2012] Source does appear to be extended
[Wed Feb 15 18:47:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 19:08:42 2012] Writing source region out to fullrun_ccd3_acisf13455_pi14-548_pass1_cl_src32_src.reg
[Wed Feb 15 19:08:42 2012] Extracting stamp from image fullrun_ccd3_acisf13455_pi14-548_cl_sm2.00.img.gz, (599, 164) - (645, 210)
[Wed Feb 15 19:08:42 2012] Writing fullrun_ccd3_acisf13455_pi14-548_pass1_cl_src32.gif
[Wed Feb 15 19:08:44 2012] Size of ../../acisf13455/products/events/fullrun_ccd3_acisf13455_pi14-548_pass1_cl_src32_src.evt.gz[events] = 349 counts
[Wed Feb 15 19:08:44 2012] Mean chipx,y = (939.73, 621.13)
[Wed Feb 15 19:08:44 2012] Mean tdetx,y = (4510.87, 4000.73)
[Wed Feb 15 19:08:44 2012] chipx,y range = (922.00-959.00, 602.00-640.00)
[Wed Feb 15 19:08:44 2012] Size of ../../acisf13455/products/events/fullrun_ccd3_acisf13455_pi14-548_pass1_cl_src32_bgd.evt.gz[events] = 16 counts
[Wed Feb 15 19:08:46 2012] rmf not found, will run specextract
[Wed Feb 15 19:08:46 2012] arf not found, will run specextract
[Wed Feb 15 19:09:11 2012] ../../acisf13455/products/spectra/fullrun_ccd3_acisf13455_pi14-548_pass1_cl_src32.warf not found
[Wed Feb 15 19:09:11 2012] ../../acisf13455/products/spectra/fullrun_ccd3_acisf13455_pi14-548_pass1_cl_src32.wrmf not found
[Wed Feb 15 19:09:11 2012] Removal of ../../acisf13455/products/spectra/fullrun_ccd3_acisf13455_pi14-548_pass1_cl_src32.soff failed
[Wed Feb 15 19:24:42 2012] Keeping rmf generated by specextract
[Wed Feb 15 19:24:42 2012] 196.95
[Wed Feb 15 19:26:12 2012] Updating aperture counts using extracted products
[Wed Feb 15 19:26:12 2012] Error reading totcts from fullrun_ccd3_acisf13455_pi14-548_pass1_cl_src32_src.pi.gz
[Wed Feb 15 19:26:13 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 19:26:13 2012] Using photon index=1.80, rate=0.00497, arf fullrun_ccd3_acisf13455_pi14-548_pass1_cl_src32.arf
[Wed Feb 15 19:26:13 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 15 19:26:13 2012] Updating source flux to 6e-14
[Wed Feb 15 19:26:40 2012] Reading fit data from acisf13455/analysis//spectral/fullrun_ccd3_acisf13455_pi14-548_pass1_cl_src32_pl.csv
[Wed Feb 15 19:26:40 2012] Spectral fit parameter nH value = 2.05906e+20
[Wed Feb 15 19:26:40 2012] Spectral fit parameter PhoIndex value = 1.82099
[Wed Feb 15 19:26:40 2012] Failed to get F(0.3-8.0) from acisf13455/analysis//spectral/fullrun_ccd3_acisf13455_pi14-548_pass1_cl_src32_pl.csv, possibly due to different flux energy range selected
[Wed Feb 15 19:26:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 19:26:40 2012] Using Nh = 2.1e+20, photon index=1.82, rate=0.00497, arf fullrun_ccd3_acisf13455_pi14-548_pass1_cl_src32.arf
[Wed Feb 15 19:26:40 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 15 19:26:40 2012] Updating source flux to 5.9e-14