[Wed Feb 15 14:37:10 2012] Detection parameters:
  Position = (320.5, 76.9) = 1 3 54.46 -21 54 52.4
  Extent = 0.7" x 0.5", rotation angle = 11 degrees
  Source counts = 11.5 +/- 3.6
  Background counts = 1.5
  Rate = 0.0002 +/- 5e-05

[Wed Feb 15 14:37:10 2012] Off-axis axis estimate = 0.68'
[Wed Feb 15 15:37:28 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 15:37:28 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Feb 15 15:37:28 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.912
[Wed Feb 15 15:37:28 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 0.38"
[Wed Feb 15 16:09:27 2012] fullrun_ccd3_acisf13455_pi14-548_cl_pass0_src22.ximg exists
[Wed Feb 15 16:09:27 2012] fullrun_ccd3_acisf13455_pi14-548_cl_pass0_src22_1.ximg exists
[Wed Feb 15 16:09:27 2012] Fit fullrun_ccd3_acisf13455_pi14-548_cl_pass0_src22 appears to have run properly
[Wed Feb 15 16:09:27 2012] fullrun_ccd3_acisf13455_pi14-548_cl_pass0_tfrozen_src22.ximg exists
[Wed Feb 15 16:09:27 2012] fullrun_ccd3_acisf13455_pi14-548_cl_pass0_tfrozen_src22_1.ximg exists
[Wed Feb 15 16:09:27 2012] Fit fullrun_ccd3_acisf13455_pi14-548_cl_pass0_tfrozen_src22 appears to have run properly
[Wed Feb 15 16:56:47 2012] Spatial fit model total counts = 21.999800, observed total counts = 22.000000
[Wed Feb 15 16:56:47 2012] Offset between fit and detection position for source 13 = 0.755586 pixels
[Wed Feb 15 16:56:47 2012] 22.339710 total counts/ 9.194310 bgd. counts: snr = 4.335251
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.755586 pixels
  Position = (321.0, 77.4) = 1 3 54.46 -21 54 52.4
  Extent = 0.8 (0.6-1.3)", rotation angle = 0
  Source counts = 13.1 +/- 4.7
  Background counts = 9.2
  Rate = 0.0002 +/- 7e-05
[Wed Feb 15 16:56:47 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 16:56:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 16:56:47 2012] Assessing source extent using major axis lower bound
[Wed Feb 15 16:56:47 2012] Source does appear to be extended
[Wed Feb 15 16:56:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 17:44:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 15 17:44:29 2012] Initial guess for spatial extent in simple fitting = 0.83"
[Wed Feb 15 17:44:29 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.052
[Wed Feb 15 17:44:29 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 0.83"
[Wed Feb 15 18:13:36 2012] fullrun_ccd3_acisf13455_pi14-548_cl_pass1_src22.ximg exists
[Wed Feb 15 18:13:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13455_pi14-548_cl_pass1_src22.csv
[Wed Feb 15 18:13:36 2012] fullrun_ccd3_acisf13455_pi14-548_cl_pass1_src22_1.ximg exists
[Wed Feb 15 18:13:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13455_pi14-548_cl_pass1_src22.csv
[Wed Feb 15 18:13:36 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13455_pi14-548_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13455_pi14-548_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 18:13:36 2012] fullrun_ccd3_acisf13455_pi14-548_cl_pass1_tfrozen_src22.ximg exists
[Wed Feb 15 18:13:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13455_pi14-548_cl_pass1_tfrozen_src22.csv
[Wed Feb 15 18:13:36 2012] fullrun_ccd3_acisf13455_pi14-548_cl_pass1_tfrozen_src22_1.ximg exists
[Wed Feb 15 18:13:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13455_pi14-548_cl_pass1_tfrozen_src22.csv
[Wed Feb 15 18:13:36 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13455_pi14-548_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13455_pi14-548_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 18:47:11 2012] Spatial fit model total counts = 16.329300, observed total counts = 22.000000
[Wed Feb 15 18:47:11 2012] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Feb 15 18:47:11 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 18:47:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 18:47:11 2012] Assessing source extent using major axis lower bound
[Wed Feb 15 18:47:11 2012] Source does appear to be extended
[Wed Feb 15 18:47:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 19:08:43 2012] Writing source region out to fullrun_ccd3_acisf13455_pi14-548_pass1_cl_src13_src.reg
[Wed Feb 15 19:08:43 2012] Extracting stamp from image fullrun_ccd3_acisf13455_pi14-548_cl_sm2.00.img.gz, (283, 40) - (359, 115)
[Wed Feb 15 19:08:43 2012] Writing fullrun_ccd3_acisf13455_pi14-548_pass1_cl_src13.gif
[Wed Feb 15 19:20:15 2012] Size of ../../acisf13455/products/events/fullrun_ccd3_acisf13455_pi14-548_pass1_cl_src13_src.evt.gz[events] = 15 counts
[Wed Feb 15 19:20:15 2012] Mean chipx,y = (976.27, 938.27)
[Wed Feb 15 19:20:15 2012] Mean tdetx,y = (4193.73, 4037.27)
[Wed Feb 15 19:20:15 2012] chipx,y range = (963.00-992.00, 923.00-957.00)
[Wed Feb 15 19:20:15 2012] Size of ../../acisf13455/products/events/fullrun_ccd3_acisf13455_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 46 counts
[Wed Feb 15 19:20:17 2012] Not generating rmf since there are only 13 counts
[Wed Feb 15 19:20:17 2012] arf not found, will run specextract
[Wed Feb 15 19:20:51 2012] ../../acisf13455/products/spectra/fullrun_ccd3_acisf13455_pi14-548_pass1_cl_src13.warf not found
[Wed Feb 15 19:20:51 2012] ../../acisf13455/products/spectra/fullrun_ccd3_acisf13455_pi14-548_pass1_cl_src13.wrmf not found
[Wed Feb 15 19:20:51 2012] Removal of ../../acisf13455/products/spectra/fullrun_ccd3_acisf13455_pi14-548_pass1_cl_src13.soff failed
[Wed Feb 15 19:24:42 2012] Spectrum 13 has only 13 counts, deleting rmf
[Wed Feb 15 19:24:42 2012] 202.566
[Wed Feb 15 19:26:13 2012] Updating aperture counts using extracted products
[Wed Feb 15 19:26:13 2012] Error reading totcts from fullrun_ccd3_acisf13455_pi14-548_pass1_cl_src13_src.pi.gz
[Wed Feb 15 19:26:13 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 19:26:13 2012] Using photon index=1.80, rate=0.000189, arf fullrun_ccd3_acisf13455_pi14-548_pass1_cl_src13.arf
[Wed Feb 15 19:26:13 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 15 19:26:13 2012] Updating source flux to 2.2e-15
[Wed Feb 15 19:26:30 2012] Flag p found in src. 13 procflags, skipping spectral fitting
[Wed Feb 15 19:26:30 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting