[Sat Oct 22 22:43:20 2011] Detection parameters:
  Position = (433.7, 969.4) = 1 4 21.25 -21 45 51.7
  Extent = 2.8" x 1.9", rotation angle = 173 degrees
  Source counts = 685.8 +/- 27.4
  Background counts = 63.2
  Rate = 0.007 +/- 0.0003

[Sat Oct 22 22:43:21 2011] Off-axis axis estimate = 8.25'
[Sat Oct 22 23:13:27 2011] Using EEF radius (= 3.01 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 23:13:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 23:13:27 2011] Initial guess for spatial extent in simple fitting = 3.01"
[Sat Oct 22 23:13:27 2011] source mask rpix=6.1, npix_max = 174, mask sum = 169, frac = 0.966
[Sat Oct 22 23:13:27 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.01"
[Sat Oct 22 23:30:21 2011] fullrun_ccd2_acisf13454_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 22 23:30:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13454_pi14-548_cl_pass0_src1.csv
[Sat Oct 22 23:30:21 2011] fullrun_ccd2_acisf13454_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 22 23:30:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13454_pi14-548_cl_pass0_src1.csv
[Sat Oct 22 23:30:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13454_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13454_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 23:30:21 2011] fullrun_ccd2_acisf13454_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 22 23:30:21 2011] fullrun_ccd2_acisf13454_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 22 23:30:21 2011] Fit fullrun_ccd2_acisf13454_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 23 00:13:09 2011] Spatial fit model total counts = 775.622000, observed total counts = 772.000000
[Sun Oct 23 00:13:09 2011] Offset between fit and detection position for source 1 = 0.499072 pixels
[Sun Oct 23 00:13:09 2011] 776.980000 total counts/ 114.292000 bgd. counts: snr = 61.987082
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.499072 pixels
  Position = (433.4, 969.9) = 1 4 21.27 -21 45 51.7
  Extent = 2.6 (2.5-2.8)", rotation angle = 0
  Source counts = 662.7 +/- 27.9
  Background counts = 114.3
  Rate = 0.007 +/- 0.0003
[Sun Oct 23 00:13:09 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 00:13:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 00:13:09 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 00:13:09 2011] Source does appear to be extended
[Sun Oct 23 00:13:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 00:38:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 00:38:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 00:38:14 2011] Initial guess for spatial extent in simple fitting = 2.64"
[Sun Oct 23 00:38:14 2011] source mask rpix=5.4, npix_max = 137, mask sum = 132, frac = 0.962
[Sun Oct 23 00:38:14 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.64"
[Sun Oct 23 00:53:40 2011] fullrun_ccd2_acisf13454_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 23 00:53:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13454_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 00:53:40 2011] fullrun_ccd2_acisf13454_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 23 00:53:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13454_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 00:53:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13454_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13454_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 00:53:40 2011] fullrun_ccd2_acisf13454_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 23 00:53:40 2011] fullrun_ccd2_acisf13454_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 23 00:53:40 2011] Fit fullrun_ccd2_acisf13454_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 23 01:37:35 2011] Spatial fit model total counts = 754.001000, observed total counts = 754.000000
[Sun Oct 23 01:37:35 2011] Offset between fit and detection position for source 1 = 0.023332 pixels
[Sun Oct 23 01:37:35 2011] 754.897000 total counts/ 107.775000 bgd. counts: snr = 62.334309
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.023332 pixels
  Position = (433.4, 969.9) = 1 4 21.27 -21 45 51.7
  Extent = 2.6 (2.4-2.8)", rotation angle = 0
  Source counts = 647.1 +/- 27.5
  Background counts = 107.8
  Rate = 0.007 +/- 0.0003
[Sun Oct 23 01:37:35 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 01:37:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 01:37:35 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 01:37:35 2011] Source does appear to be extended
[Sun Oct 23 01:37:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 01:50:12 2011] Writing source region out to fullrun_ccd2_acisf13454_pi14-548_pass1_cl_src1_src.reg
[Sun Oct 23 01:50:12 2011] Extracting stamp from image fullrun_ccd2_acisf13454_pi14-548_cl_sm2.00.img.gz, (315, 851) - (552, 1089)
[Sun Oct 23 01:50:12 2011] Writing fullrun_ccd2_acisf13454_pi14-548_pass1_cl_src1.gif
[Sun Oct 23 01:50:14 2011] Size of ../../acisf13454/products/events/fullrun_ccd2_acisf13454_pi14-548_pass1_cl_src1_src.evt.gz[events] = 740 counts
[Sun Oct 23 01:50:14 2011] Mean chipx,y = (487.89, 136.92)
[Sun Oct 23 01:50:14 2011] Mean tdetx,y = (3197.92, 3598.11)
[Sun Oct 23 01:50:14 2011] chipx,y range = (453.00-522.00, 102.00-168.00)
[Sun Oct 23 01:50:14 2011] Size of ../../acisf13454/products/events/fullrun_ccd2_acisf13454_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 282 counts
[Sun Oct 23 01:50:15 2011] rmf not found, will run specextract
[Sun Oct 23 01:50:15 2011] arf not found, will run specextract
[Sun Oct 23 01:50:36 2011] ../../acisf13454/products/spectra/fullrun_ccd2_acisf13454_pi14-548_pass1_cl_src1.warf not found
[Sun Oct 23 01:50:36 2011] ../../acisf13454/products/spectra/fullrun_ccd2_acisf13454_pi14-548_pass1_cl_src1.wrmf not found
[Sun Oct 23 01:50:36 2011] Removal of ../../acisf13454/products/spectra/fullrun_ccd2_acisf13454_pi14-548_pass1_cl_src1.soff failed
[Sun Oct 23 01:59:29 2011] Keeping rmf generated by specextract
[Sun Oct 23 01:59:29 2011] 163.844
[Sun Oct 23 02:19:34 2011] Updating aperture counts using extracted products
[Sun Oct 23 02:19:34 2011] Error reading totcts from fullrun_ccd2_acisf13454_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Oct 23 02:19:34 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 02:19:34 2011] Using photon index=1.80, rate=0.00705, arf fullrun_ccd2_acisf13454_pi14-548_pass1_cl_src1.arf
[Sun Oct 23 02:19:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 02:19:34 2011] Updating source flux to 1e-13
[Sun Oct 23 02:20:07 2011] Reading fit data from acisf13454/analysis//spectral/fullrun_ccd2_acisf13454_pi14-548_pass1_cl_src1_pl.csv
[Sun Oct 23 02:20:07 2011] Spectral fit parameter nH value = 1.29289e+16
[Sun Oct 23 02:20:07 2011] Spectral fit parameter PhoIndex value = 1.93225
[Sun Oct 23 02:20:07 2011] Failed to get F(0.3-8.0) from acisf13454/analysis//spectral/fullrun_ccd2_acisf13454_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Oct 23 02:20:07 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 02:20:07 2011] Using Nh = 1.3e+16, photon index=1.93, rate=0.00705, arf fullrun_ccd2_acisf13454_pi14-548_pass1_cl_src1.arf
[Sun Oct 23 02:20:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 02:20:07 2011] Updating source flux to 1.1e-13