[Sat Oct 29 12:42:13 2011] Detection parameters:
  Position = (759.6, 622.8) = 1 2 59.50 -21 31 41.0
  Extent = 1.4" x 1.1", rotation angle = 11 degrees
  Source counts = 56.2 +/- 7.9
  Background counts = 5.8
  Rate = 0.0008 +/- 0.0001

[Sat Oct 29 12:42:13 2011] Off-axis axis estimate = 7.11'
[Sat Oct 29 14:20:31 2011] Using EEF radius (= 2.24 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 14:20:31 2011] Initial guess for spatial extent in simple fitting = 2.24"
[Sat Oct 29 14:20:31 2011] source mask rpix=4.6, npix_max = 102, mask sum = 100, frac = 0.976
[Sat Oct 29 14:20:31 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.24"
[Sat Oct 29 14:39:05 2011] fullrun_ccd3_acisf13453_pi14-548_cl_pass0_src3.ximg exists
[Sat Oct 29 14:39:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13453_pi14-548_cl_pass0_src3.csv
[Sat Oct 29 14:39:05 2011] fullrun_ccd3_acisf13453_pi14-548_cl_pass0_src3_1.ximg exists
[Sat Oct 29 14:39:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13453_pi14-548_cl_pass0_src3.csv
[Sat Oct 29 14:39:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13453_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13453_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 14:39:05 2011] fullrun_ccd3_acisf13453_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sat Oct 29 14:39:05 2011] fullrun_ccd3_acisf13453_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Oct 29 14:39:05 2011] Fit fullrun_ccd3_acisf13453_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Oct 29 15:02:15 2011] Spatial fit model total counts = 75.999700, observed total counts = 76.000000
[Sat Oct 29 15:02:15 2011] Offset between fit and detection position for source 4 = 0.877327 pixels
[Sat Oct 29 15:02:15 2011] 75.489400 total counts/ 25.789100 bgd. counts: snr = 9.786805
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.877327 pixels
  Position = (760.4, 623.2) = 1 2 59.49 -21 31 41.0
  Extent = 1.2 (1.0-1.5)", rotation angle = 0
  Source counts = 49.7 +/- 8.7
  Background counts = 25.8
  Rate = 0.0007 +/- 0.0001
[Sat Oct 29 15:02:15 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 15:02:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 15:02:15 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 15:02:15 2011] Source does appear to be extended
[Sat Oct 29 15:02:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 16:36:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 16:36:33 2011] Initial guess for spatial extent in simple fitting = 1.24"
[Sat Oct 29 16:36:33 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.988
[Sat Oct 29 16:36:33 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.24"
[Sat Oct 29 16:53:41 2011] fullrun_ccd3_acisf13453_pi14-548_cl_pass1_src3.ximg exists
[Sat Oct 29 16:53:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13453_pi14-548_cl_pass1_src3.csv
[Sat Oct 29 16:53:41 2011] fullrun_ccd3_acisf13453_pi14-548_cl_pass1_src3_1.ximg exists
[Sat Oct 29 16:53:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13453_pi14-548_cl_pass1_src3.csv
[Sat Oct 29 16:53:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13453_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13453_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 16:53:41 2011] fullrun_ccd3_acisf13453_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sat Oct 29 16:53:41 2011] fullrun_ccd3_acisf13453_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Oct 29 16:53:41 2011] Fit fullrun_ccd3_acisf13453_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Oct 29 17:15:51 2011] Spatial fit model total counts = 57.923800, observed total counts = 58.000000
[Sat Oct 29 17:15:51 2011] Offset between fit and detection position for source 4 = 0.312722 pixels
[Sat Oct 29 17:15:51 2011] 57.366310 total counts/ 3.366210 bgd. counts: snr = 29.432284
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.312722 pixels
  Position = (760.7, 623.2) = 1 2 59.48 -21 31 41.1
  Extent = 1.3 (0.7-1.6)", rotation angle = 0
  Source counts = 54.0 +/- 7.6
  Background counts = 3.4
  Rate = 0.0008 +/- 0.0001
[Sat Oct 29 17:15:51 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 17:15:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 17:15:51 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 17:15:51 2011] Source does appear to be extended
[Sat Oct 29 17:15:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 17:59:01 2011] Writing source region out to fullrun_ccd3_acisf13453_pi14-548_pass1_cl_src4_src.reg
[Sat Oct 29 17:59:01 2011] Extracting stamp from image fullrun_ccd3_acisf13453_pi14-548_cl_sm2.00.img.gz, (699, 562) - (822, 685)
[Sat Oct 29 17:59:01 2011] Writing fullrun_ccd3_acisf13453_pi14-548_pass1_cl_src4.gif
[Sat Oct 29 18:00:04 2011] Size of ../../acisf13453/products/events/fullrun_ccd3_acisf13453_pi14-548_pass1_cl_src4_src.evt.gz[events] = 63 counts
[Sat Oct 29 18:00:04 2011] Mean chipx,y = (462.76, 307.44)
[Sat Oct 29 18:00:04 2011] Mean tdetx,y = (4824.56, 3523.76)
[Sat Oct 29 18:00:04 2011] chipx,y range = (440.00-482.00, 283.00-323.00)
[Sat Oct 29 18:00:04 2011] Size of ../../acisf13453/products/events/fullrun_ccd3_acisf13453_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 46 counts
[Sat Oct 29 18:00:05 2011] Not generating rmf since there are only 54 counts
[Sat Oct 29 18:00:05 2011] arf not found, will run specextract
[Sat Oct 29 18:00:29 2011] ../../acisf13453/products/spectra/fullrun_ccd3_acisf13453_pi14-548_pass1_cl_src4.warf not found
[Sat Oct 29 18:00:29 2011] ../../acisf13453/products/spectra/fullrun_ccd3_acisf13453_pi14-548_pass1_cl_src4.wrmf not found
[Sat Oct 29 18:00:29 2011] Removal of ../../acisf13453/products/spectra/fullrun_ccd3_acisf13453_pi14-548_pass1_cl_src4.soff failed
[Sat Oct 29 18:07:18 2011] Spectrum 4 has only 54 counts, deleting rmf
[Sat Oct 29 18:07:18 2011] 168.061
[Sat Oct 29 18:08:49 2011] Updating aperture counts using extracted products
[Sat Oct 29 18:08:49 2011] Error reading totcts from fullrun_ccd3_acisf13453_pi14-548_pass1_cl_src4_src.pi.gz
[Sat Oct 29 18:08:49 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 18:08:49 2011] Using photon index=1.80, rate=0.000783, arf fullrun_ccd3_acisf13453_pi14-548_pass1_cl_src4.arf
[Sat Oct 29 18:08:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 18:08:49 2011] Updating source flux to 1.1e-14
[Sat Oct 29 18:09:16 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 29 18:09:17 2011] acisf13453/analysis//spectral/fullrun_ccd3_acisf13453_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete