[Sat Oct 29 12:41:49 2011] Detection parameters:
  Position = (65.1, 243.2) = 1 4 0.32 -21 35 25.0
  Extent = 1.0" x 0.7", rotation angle = 42 degrees
  Source counts = 128.0 +/- 12.4
  Background counts = 25.0
  Rate = 0.002 +/- 0.0002

[Sat Oct 29 12:41:50 2011] Off-axis axis estimate = 8.63'
[Sat Oct 29 13:34:24 2011] Using EEF radius (= 3.29 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 13:34:24 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 13:34:24 2011] Initial guess for spatial extent in simple fitting = 3.29"
[Sat Oct 29 13:34:24 2011] source mask rpix=6.7, npix_max = 206, mask sum = 149, frac = 0.721
[Sat Oct 29 13:34:24 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.29"
[Sat Oct 29 14:20:30 2011] fullrun_ccd2_acisf13453_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 29 14:20:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13453_pi14-548_cl_pass0_src1.csv
[Sat Oct 29 14:20:30 2011] fullrun_ccd2_acisf13453_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 29 14:20:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13453_pi14-548_cl_pass0_src1.csv
[Sat Oct 29 14:20:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13453_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13453_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 14:20:30 2011] fullrun_ccd2_acisf13453_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 29 14:20:30 2011] fullrun_ccd2_acisf13453_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 29 14:20:30 2011] Fit fullrun_ccd2_acisf13453_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 29 15:02:13 2011] Spatial fit model total counts = 193.440000, observed total counts = 195.000000
[Sat Oct 29 15:02:13 2011] Offset between fit and detection position for source 2 = 1.839935 pixels
[Sat Oct 29 15:02:13 2011] 194.363900 total counts/ 24.655900 bgd. counts: snr = 34.177625
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.839935 pixels
  Position = (66.3, 244.7) = 1 4 0.29 -21 35 24.5
  Extent = 3.1 (2.8-3.5)", rotation angle = 0
  Source counts = 169.7 +/- 13.9
  Background counts = 24.7
  Rate = 0.002 +/- 0.0002
[Sat Oct 29 15:02:13 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 15:02:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 15:02:13 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 15:02:13 2011] Source does appear to be extended
[Sat Oct 29 15:02:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 15:48:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 15:48:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 15:48:14 2011] Initial guess for spatial extent in simple fitting = 3.11"
[Sat Oct 29 15:48:14 2011] source mask rpix=6.3, npix_max = 186, mask sum = 153, frac = 0.820
[Sat Oct 29 15:48:14 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.11"
[Sat Oct 29 16:36:33 2011] fullrun_ccd2_acisf13453_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 29 16:36:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13453_pi14-548_cl_pass1_src1.csv
[Sat Oct 29 16:36:33 2011] fullrun_ccd2_acisf13453_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 29 16:36:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13453_pi14-548_cl_pass1_src1.csv
[Sat Oct 29 16:36:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13453_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13453_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 16:36:33 2011] fullrun_ccd2_acisf13453_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 29 16:36:33 2011] fullrun_ccd2_acisf13453_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 29 16:36:33 2011] Fit fullrun_ccd2_acisf13453_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 29 17:15:49 2011] Spatial fit model total counts = 193.784000, observed total counts = 194.000000
[Sat Oct 29 17:15:49 2011] Offset between fit and detection position for source 2 = 0.104442 pixels
[Sat Oct 29 17:15:49 2011] 194.527400 total counts/ 27.568400 bgd. counts: snr = 31.798311
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.104442 pixels
  Position = (66.3, 244.7) = 1 4 0.29 -21 35 24.5
  Extent = 3.1 (2.7-3.5)", rotation angle = 0
  Source counts = 167.0 +/- 13.9
  Background counts = 27.6
  Rate = 0.002 +/- 0.0002
[Sat Oct 29 17:15:49 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 17:15:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 17:15:49 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 17:15:49 2011] Source does appear to be extended
[Sat Oct 29 17:15:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 17:42:43 2011] Writing source region out to fullrun_ccd2_acisf13453_pi14-548_pass1_cl_src2_src.reg
[Sat Oct 29 17:42:43 2011] Extracting stamp from image fullrun_ccd2_acisf13453_pi14-548_cl_sm2.00.img.gz, (0, 104) - (207, 385)
[Sat Oct 29 17:42:43 2011] Writing fullrun_ccd2_acisf13453_pi14-548_pass1_cl_src2.gif
[Sat Oct 29 17:42:45 2011] Size of ../../acisf13453/products/events/fullrun_ccd2_acisf13453_pi14-548_pass1_cl_src2_src.evt.gz[events] = 188 counts
[Sat Oct 29 17:42:45 2011] Mean chipx,y = (238.88, 17.84)
[Sat Oct 29 17:42:45 2011] Mean tdetx,y = (3078.84, 3847.12)
[Sat Oct 29 17:42:45 2011] chipx,y range = (202.00-269.00, 3.00-46.00)
[Sat Oct 29 17:42:45 2011] Size of ../../acisf13453/products/events/fullrun_ccd2_acisf13453_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 143 counts
[Sat Oct 29 17:42:46 2011] rmf not found, will run specextract
[Sat Oct 29 17:42:46 2011] arf not found, will run specextract
[Sat Oct 29 17:42:55 2011] ../../acisf13453/products/spectra/fullrun_ccd2_acisf13453_pi14-548_pass1_cl_src2.warf not found
[Sat Oct 29 17:42:55 2011] ../../acisf13453/products/spectra/fullrun_ccd2_acisf13453_pi14-548_pass1_cl_src2.wrmf not found
[Sat Oct 29 17:42:55 2011] Removal of ../../acisf13453/products/spectra/fullrun_ccd2_acisf13453_pi14-548_pass1_cl_src2.soff failed
[Sat Oct 29 17:59:00 2011] Keeping rmf generated by specextract
[Sat Oct 29 17:59:00 2011] 95.4957
[Sat Oct 29 18:08:48 2011] Updating aperture counts using extracted products
[Sat Oct 29 18:08:48 2011] Error reading totcts from fullrun_ccd2_acisf13453_pi14-548_pass1_cl_src2_src.pi.gz
[Sat Oct 29 18:08:48 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 18:08:48 2011] Using photon index=1.80, rate=0.00242, arf fullrun_ccd2_acisf13453_pi14-548_pass1_cl_src2.arf
[Sat Oct 29 18:08:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 18:08:48 2011] Updating source flux to 6.1e-14
[Sat Oct 29 18:09:16 2011] Reading fit data from acisf13453/analysis//spectral/fullrun_ccd2_acisf13453_pi14-548_pass1_cl_src2_pl.csv
[Sat Oct 29 18:09:16 2011] Spectral fit parameter nH value = 8.26696e+20
[Sat Oct 29 18:09:16 2011] Spectral fit parameter PhoIndex value = 1.85317
[Sat Oct 29 18:09:16 2011] Failed to get F(0.3-8.0) from acisf13453/analysis//spectral/fullrun_ccd2_acisf13453_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Oct 29 18:09:16 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 18:09:16 2011] Using Nh = 8.3e+20, photon index=1.85, rate=0.00242, arf fullrun_ccd2_acisf13453_pi14-548_pass1_cl_src2.arf
[Sat Oct 29 18:09:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 18:09:16 2011] Updating source flux to 5.7e-14