[Sat Oct 29 12:41:25 2011] Detection parameters: Position = (603.7, 601.3) = 1 3 1.97 -21 40 24.3 Extent = 1.4" x 1.0", rotation angle = 113 degrees Source counts = 150.4 +/- 12.6 Background counts = 9.6 Rate = 0.002 +/- 0.0002 [Sat Oct 29 12:41:25 2011] Off-axis axis estimate = 6.54' [Sat Oct 29 13:10:11 2011] Using EEF radius (= 1.92 ")to estimate initial spatial extent for simple fitting [Sat Oct 29 13:10:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Oct 29 13:10:11 2011] Initial guess for spatial extent in simple fitting = 1.92" [Sat Oct 29 13:10:11 2011] source mask rpix=3.9, npix_max = 77, mask sum = 81, frac = 1.048 [Sat Oct 29 13:10:11 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.92" [Sat Oct 29 13:34:23 2011] fullrun_ccd1_acisf13453_pi14-548_cl_pass0_src1.ximg exists [Sat Oct 29 13:34:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13453_pi14-548_cl_pass0_src1.csv [Sat Oct 29 13:34:23 2011] fullrun_ccd1_acisf13453_pi14-548_cl_pass0_src1_1.ximg exists [Sat Oct 29 13:34:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13453_pi14-548_cl_pass0_src1.csv [Sat Oct 29 13:34:23 2011] It looks like the fit did not converge You should probably delete fullrun_ccd1_acisf13453_pi14-548_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd1_acisf13453_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Oct 29 13:34:23 2011] fullrun_ccd1_acisf13453_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Sat Oct 29 13:34:23 2011] fullrun_ccd1_acisf13453_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Sat Oct 29 13:34:23 2011] Fit fullrun_ccd1_acisf13453_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Sat Oct 29 15:02:10 2011] Spatial fit model total counts = 165.000000, observed total counts = 165.000000 [Sat Oct 29 15:02:10 2011] Offset between fit and detection position for source 9 = 0.884938 pixels [Sat Oct 29 15:02:10 2011] 164.817900 total counts/ 19.256900 bgd. counts: snr = 33.170487 Spatial fit parameters: Offset between fit and detection position for source 9 = 0.884938 pixels Position = (604.2, 602.0) = 1 3 1.98 -21 40 24.1 Extent = 1.3 (1.2-1.5)", rotation angle = 0 Source counts = 145.6 +/- 12.8 Background counts = 19.3 Rate = 0.002 +/- 0.0002 [Sat Oct 29 15:02:10 2011] Vigneting correction estimate = 1.000000 [Sat Oct 29 15:02:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Oct 29 15:02:10 2011] Assessing source extent using major axis lower bound [Sat Oct 29 15:02:10 2011] Source does appear to be extended [Sat Oct 29 15:02:10 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Oct 29 15:27:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Oct 29 15:27:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Oct 29 15:27:01 2011] Initial guess for spatial extent in simple fitting = 1.32" [Sat Oct 29 15:27:01 2011] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.891 [Sat Oct 29 15:27:01 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.32" [Sat Oct 29 15:48:13 2011] fullrun_ccd1_acisf13453_pi14-548_cl_pass1_src1.ximg exists [Sat Oct 29 15:48:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13453_pi14-548_cl_pass1_src1.csv [Sat Oct 29 15:48:13 2011] fullrun_ccd1_acisf13453_pi14-548_cl_pass1_src1_1.ximg exists [Sat Oct 29 15:48:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13453_pi14-548_cl_pass1_src1.csv [Sat Oct 29 15:48:14 2011] It looks like the fit did not converge You should probably delete fullrun_ccd1_acisf13453_pi14-548_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd1_acisf13453_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Oct 29 15:48:14 2011] fullrun_ccd1_acisf13453_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Sat Oct 29 15:48:14 2011] fullrun_ccd1_acisf13453_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Sat Oct 29 15:48:14 2011] Fit fullrun_ccd1_acisf13453_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly [Sat Oct 29 17:15:46 2011] Spatial fit model total counts = 155.997000, observed total counts = 156.000000 [Sat Oct 29 17:15:46 2011] Offset between fit and detection position for source 9 = 0.100933 pixels [Sat Oct 29 17:15:46 2011] 156.184400 total counts/ 16.897400 bgd. counts: snr = 33.884466 Spatial fit parameters: Offset between fit and detection position for source 9 = 0.100933 pixels Position = (604.1, 602.1) = 1 3 1.98 -21 40 24.1 Extent = 1.3 (1.1-1.4)", rotation angle = 0 Source counts = 139.3 +/- 12.5 Background counts = 16.9 Rate = 0.002 +/- 0.0002 [Sat Oct 29 17:15:46 2011] Vigneting correction estimate = 1.000000 [Sat Oct 29 17:15:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Oct 29 17:15:46 2011] Assessing source extent using major axis lower bound [Sat Oct 29 17:15:46 2011] Source does appear to be extended [Sat Oct 29 17:15:46 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Oct 29 17:30:55 2011] Writing source region out to fullrun_ccd1_acisf13453_pi14-548_pass1_cl_src9_src.reg [Sat Oct 29 17:30:55 2011] Extracting stamp from image fullrun_ccd1_acisf13453_pi14-548_cl_sm2.00.img.gz, (547, 545) - (661, 659) [Sat Oct 29 17:30:55 2011] Writing fullrun_ccd1_acisf13453_pi14-548_pass1_cl_src9.gif [Sat Oct 29 17:30:57 2011] Size of ../../acisf13453/products/events/fullrun_ccd1_acisf13453_pi14-548_pass1_cl_src9_src.evt.gz[events] = 154 counts [Sat Oct 29 17:30:57 2011] Mean chipx,y = (472.55, 457.69) [Sat Oct 29 17:30:57 2011] Mean tdetx,y = (4674.31, 4579.55) [Sat Oct 29 17:30:57 2011] chipx,y range = (450.00-494.00, 437.00-479.00) [Sat Oct 29 17:30:57 2011] Size of ../../acisf13453/products/events/fullrun_ccd1_acisf13453_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 61 counts [Sat Oct 29 17:30:58 2011] rmf not found, will run specextract [Sat Oct 29 17:30:58 2011] arf not found, will run specextract [Sat Oct 29 17:31:20 2011] ../../acisf13453/products/spectra/fullrun_ccd1_acisf13453_pi14-548_pass1_cl_src9.warf not found [Sat Oct 29 17:31:20 2011] ../../acisf13453/products/spectra/fullrun_ccd1_acisf13453_pi14-548_pass1_cl_src9.wrmf not found [Sat Oct 29 17:31:20 2011] Removal of ../../acisf13453/products/spectra/fullrun_ccd1_acisf13453_pi14-548_pass1_cl_src9.soff failed [Sat Oct 29 17:42:42 2011] Keeping rmf generated by specextract [Sat Oct 29 17:42:42 2011] 183.314 [Sat Oct 29 18:08:48 2011] Updating aperture counts using extracted products [Sat Oct 29 18:08:48 2011] Error reading totcts from fullrun_ccd1_acisf13453_pi14-548_pass1_cl_src9_src.pi.gz [Sat Oct 29 18:08:48 2011] Calculating source flux in energy range 0.30-8.00 [Sat Oct 29 18:08:48 2011] Using photon index=1.80, rate=0.00202, arf fullrun_ccd1_acisf13453_pi14-548_pass1_cl_src9.arf [Sat Oct 29 18:08:48 2011] Assuming count rate is from the 0.20-8.00 bandpass [Sat Oct 29 18:08:48 2011] Updating source flux to 2.6e-14 [Sat Oct 29 18:09:10 2011] Reading fit data from acisf13453/analysis//spectral/fullrun_ccd1_acisf13453_pi14-548_pass1_cl_src9_pl.csv [Sat Oct 29 18:09:10 2011] Spectral fit parameter nH value = 8.33139e+13 [Sat Oct 29 18:09:10 2011] Spectral fit parameter PhoIndex value = 2.00172 [Sat Oct 29 18:09:10 2011] Failed to get F(0.3-8.0) from acisf13453/analysis//spectral/fullrun_ccd1_acisf13453_pi14-548_pass1_cl_src9_pl.csv, possibly due to different flux energy range selected [Sat Oct 29 18:09:10 2011] Calculating source flux in energy range 0.30-8.00 [Sat Oct 29 18:09:10 2011] Using Nh = 8.3e+13, photon index=2.00, rate=0.00202, arf fullrun_ccd1_acisf13453_pi14-548_pass1_cl_src9.arf [Sat Oct 29 18:09:10 2011] Assuming count rate is from the 0.20-8.00 bandpass [Sat Oct 29 18:09:10 2011] Updating source flux to 2.7e-14