[Mon Oct 24 17:14:04 2011] Detection parameters:
  Position = (854.5, 231.3) = 1 0 49.68 -22 9 2.8
  Extent = 1.2" x 0.9", rotation angle = 7 degrees
  Source counts = 10.6 +/- 4.0
  Background counts = 5.4
  Rate = 7e-05 +/- 3e-05

[Mon Oct 24 17:14:04 2011] Off-axis axis estimate = 7.64'
[Mon Oct 24 18:59:11 2011] Using EEF radius (= 2.58 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 18:59:11 2011] Initial guess for spatial extent in simple fitting = 2.58"
[Mon Oct 24 18:59:11 2011] source mask rpix=5.2, npix_max = 132, mask sum = 121, frac = 0.915
[Mon Oct 24 18:59:11 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 2.58"
[Mon Oct 24 19:31:07 2011] fullrun_ccd3_acisf13452_pi14-548_cl_pass0_src28.ximg exists
[Mon Oct 24 19:31:07 2011] fullrun_ccd3_acisf13452_pi14-548_cl_pass0_src28_1.ximg exists
[Mon Oct 24 19:31:07 2011] Fit fullrun_ccd3_acisf13452_pi14-548_cl_pass0_src28 appears to have run properly
[Mon Oct 24 19:31:07 2011] fullrun_ccd3_acisf13452_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Mon Oct 24 19:31:07 2011] fullrun_ccd3_acisf13452_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Mon Oct 24 19:31:07 2011] Fit fullrun_ccd3_acisf13452_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Mon Oct 24 19:38:35 2011] Spatial fit model total counts = 41.998800, observed total counts = 42.000000
[Mon Oct 24 19:38:35 2011] Offset between fit and detection position for source 28 = 1.463456 pixels
[Mon Oct 24 19:38:35 2011] 42.768800 total counts/ 31.825700 bgd. counts: snr = 1.939775
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 1.463456 pixels
  Position = (855.9, 231.7) = 1 0 49.65 -22 9 2.8
  Extent = 1.1 (0.6-1.5)", rotation angle = 0
  Source counts = 10.9 +/- 6.5
  Background counts = 31.8
  Rate = 8e-05 +/- 5e-05
[Mon Oct 24 19:38:35 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 19:38:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 19:38:35 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 19:38:35 2011] Source does appear to be extended
[Mon Oct 24 19:38:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 21:07:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 21:07:39 2011] Initial guess for spatial extent in simple fitting = 1.06"
[Mon Oct 24 21:07:39 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.059
[Mon Oct 24 21:07:39 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 1.06"
[Mon Oct 24 21:35:35 2011] fullrun_ccd3_acisf13452_pi14-548_cl_pass1_src28.ximg exists
[Mon Oct 24 21:35:35 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf13452_pi14-548_cl_pass1_src28.csv
[Mon Oct 24 21:35:35 2011] fullrun_ccd3_acisf13452_pi14-548_cl_pass1_src28_1.ximg exists
[Mon Oct 24 21:35:35 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf13452_pi14-548_cl_pass1_src28.csv
[Mon Oct 24 21:35:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13452_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13452_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 21:35:35 2011] fullrun_ccd3_acisf13452_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Mon Oct 24 21:35:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13452_pi14-548_cl_pass1_tfrozen_src28.csv
[Mon Oct 24 21:35:35 2011] fullrun_ccd3_acisf13452_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Mon Oct 24 21:35:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13452_pi14-548_cl_pass1_tfrozen_src28.csv
[Mon Oct 24 21:35:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13452_pi14-548_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13452_pi14-548_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 21:48:15 2011] Spatial fit model total counts = 18.458900, observed total counts = 21.000000
[Mon Oct 24 21:48:15 2011] Offset between fit and detection position for source 28 = 1.254599 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 1.254599 pixels
  Position = (855.3, 230.6) = 1 0 49.67 -22 9 3.4
  Extent = 1.5 (1.2-2.1)", rotation angle = 0
  Source counts = 20.5 +/- 4.5
  Background counts = 0.0
  Rate = 0.0001 +/- 3e-05
[Mon Oct 24 21:48:15 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 21:48:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 21:48:15 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 21:48:15 2011] Source does appear to be extended
[Mon Oct 24 21:48:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 22:33:34 2011] Writing source region out to fullrun_ccd3_acisf13452_pi14-548_pass1_cl_src28_src.reg
[Mon Oct 24 22:33:34 2011] Extracting stamp from image fullrun_ccd3_acisf13452_pi14-548_cl_sm2.00.img.gz, (788, 164) - (922, 297)
[Mon Oct 24 22:33:34 2011] Writing fullrun_ccd3_acisf13452_pi14-548_pass1_cl_src28.gif
[Mon Oct 24 22:50:28 2011] Size of ../../acisf13452/products/events/fullrun_ccd3_acisf13452_pi14-548_pass1_cl_src28_src.evt.gz[events] = 24 counts
[Mon Oct 24 22:50:28 2011] Mean chipx,y = (798.96, 93.00)
[Mon Oct 24 22:50:28 2011] Mean tdetx,y = (5039.00, 3859.96)
[Mon Oct 24 22:50:28 2011] chipx,y range = (780.00-820.00, 66.00-106.00)
[Mon Oct 24 22:50:28 2011] Size of ../../acisf13452/products/events/fullrun_ccd3_acisf13452_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 172 counts
[Mon Oct 24 22:50:29 2011] Not generating rmf since there are only 20 counts
[Mon Oct 24 22:50:29 2011] arf not found, will run specextract
[Mon Oct 24 22:50:48 2011] ../../acisf13452/products/spectra/fullrun_ccd3_acisf13452_pi14-548_pass1_cl_src28.warf not found
[Mon Oct 24 22:50:48 2011] ../../acisf13452/products/spectra/fullrun_ccd3_acisf13452_pi14-548_pass1_cl_src28.wrmf not found
[Mon Oct 24 22:50:48 2011] Removal of ../../acisf13452/products/spectra/fullrun_ccd3_acisf13452_pi14-548_pass1_cl_src28.soff failed
[Mon Oct 24 22:51:38 2011] Spectrum 28 has only 21 counts, deleting rmf
[Mon Oct 24 22:51:38 2011] 173.659
[Mon Oct 24 22:52:38 2011] Updating aperture counts using extracted products
[Mon Oct 24 22:52:38 2011] Error reading totcts from fullrun_ccd3_acisf13452_pi14-548_pass1_cl_src28_src.pi.gz
[Mon Oct 24 22:52:38 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 22:52:38 2011] Using photon index=1.80, rate=0.000144, arf fullrun_ccd3_acisf13452_pi14-548_pass1_cl_src28.arf
[Mon Oct 24 22:52:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 22:52:38 2011] Updating source flux to 2e-15
[Mon Oct 24 22:53:12 2011] Source 28 has fewer than 100.000000 counts, skipping spectral fitting