[Mon Oct 24 17:14:03 2011] Detection parameters:
  Position = (1105.4, 897.7) = 1 0 40.82 -22 3 34.8
  Extent = 3.2" x 1.9", rotation angle = 107 degrees
  Source counts = 1346.4 +/- 38.5
  Background counts = 136.6
  Rate = 0.009 +/- 0.0003

[Mon Oct 24 17:14:04 2011] Off-axis axis estimate = 8.69'
[Mon Oct 24 18:59:11 2011] Using EEF radius (= 3.34 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 18:59:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 18:59:11 2011] Initial guess for spatial extent in simple fitting = 3.34"
[Mon Oct 24 18:59:11 2011] source mask rpix=6.8, npix_max = 211, mask sum = 225, frac = 1.061
[Mon Oct 24 18:59:11 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.34"
[Mon Oct 24 19:31:07 2011] fullrun_ccd3_acisf13452_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 24 19:31:07 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf13452_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 19:31:07 2011] fullrun_ccd3_acisf13452_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 24 19:31:07 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf13452_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 19:31:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13452_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13452_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 19:31:07 2011] fullrun_ccd3_acisf13452_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 24 19:31:07 2011] fullrun_ccd3_acisf13452_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 24 19:31:07 2011] Fit fullrun_ccd3_acisf13452_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 24 19:38:35 2011] Spatial fit model total counts = 1496.610000, observed total counts = 1500.000000
[Mon Oct 24 19:38:35 2011] Offset between fit and detection position for source 2 = 1.026261 pixels
[Mon Oct 24 19:38:35 2011] 1497.738000 total counts/ 248.538000 bgd. counts: snr = 79.238378
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.026261 pixels
  Position = (1106.1, 898.5) = 1 0 40.82 -22 3 34.7
  Extent = 2.6 (2.5-2.7)", rotation angle = 0
  Source counts = 1249.2 +/- 38.7
  Background counts = 248.5
  Rate = 0.009 +/- 0.0003
[Mon Oct 24 19:38:35 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 19:38:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 19:38:35 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 19:38:35 2011] Source does appear to be extended
[Mon Oct 24 19:38:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 21:07:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 21:07:39 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 21:07:39 2011] Initial guess for spatial extent in simple fitting = 2.58"
[Mon Oct 24 21:07:39 2011] source mask rpix=5.2, npix_max = 132, mask sum = 132, frac = 0.998
[Mon Oct 24 21:07:39 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.58"
[Mon Oct 24 21:35:35 2011] fullrun_ccd3_acisf13452_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 24 21:35:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13452_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 21:35:35 2011] fullrun_ccd3_acisf13452_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 24 21:35:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13452_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 21:35:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13452_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13452_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 21:35:35 2011] fullrun_ccd3_acisf13452_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 24 21:35:35 2011] fullrun_ccd3_acisf13452_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 24 21:35:35 2011] Fit fullrun_ccd3_acisf13452_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 24 21:48:15 2011] Spatial fit model total counts = 1440.000000, observed total counts = 1440.000000
[Mon Oct 24 21:48:15 2011] Offset between fit and detection position for source 2 = 0.090947 pixels
[Mon Oct 24 21:48:15 2011] 1438.551000 total counts/ 275.171000 bgd. counts: snr = 70.132652
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.090947 pixels
  Position = (1106.2, 898.5) = 1 0 40.81 -22 3 34.7
  Extent = 2.4 (2.2-2.5)", rotation angle = 0
  Source counts = 1163.4 +/- 37.9
  Background counts = 275.2
  Rate = 0.008 +/- 0.0003
[Mon Oct 24 21:48:15 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 21:48:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 21:48:15 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 21:48:15 2011] Source does appear to be extended
[Mon Oct 24 21:48:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 22:33:33 2011] Writing source region out to fullrun_ccd3_acisf13452_pi14-548_pass1_cl_src2_src.reg
[Mon Oct 24 22:33:33 2011] Extracting stamp from image fullrun_ccd3_acisf13452_pi14-548_cl_sm2.00.img.gz, (998, 791) - (1214, 1006)
[Mon Oct 24 22:33:33 2011] Writing fullrun_ccd3_acisf13452_pi14-548_pass1_cl_src2.gif
[Mon Oct 24 22:33:36 2011] Size of ../../acisf13452/products/events/fullrun_ccd3_acisf13452_pi14-548_pass1_cl_src2_src.evt.gz[events] = 1381 counts
[Mon Oct 24 22:33:36 2011] Mean chipx,y = (136.01, 340.99)
[Mon Oct 24 22:33:36 2011] Mean tdetx,y = (4791.01, 3197.01)
[Mon Oct 24 22:33:36 2011] chipx,y range = (105.00-172.00, 306.00-378.00)
[Mon Oct 24 22:33:36 2011] Size of ../../acisf13452/products/events/fullrun_ccd3_acisf13452_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 433 counts
[Mon Oct 24 22:33:37 2011] rmf not found, will run specextract
[Mon Oct 24 22:33:37 2011] arf not found, will run specextract
[Mon Oct 24 22:33:59 2011] ../../acisf13452/products/spectra/fullrun_ccd3_acisf13452_pi14-548_pass1_cl_src2.warf not found
[Mon Oct 24 22:33:59 2011] ../../acisf13452/products/spectra/fullrun_ccd3_acisf13452_pi14-548_pass1_cl_src2.wrmf not found
[Mon Oct 24 22:33:59 2011] Removal of ../../acisf13452/products/spectra/fullrun_ccd3_acisf13452_pi14-548_pass1_cl_src2.soff failed
[Mon Oct 24 22:51:38 2011] Keeping rmf generated by specextract
[Mon Oct 24 22:51:38 2011] 162.506
[Mon Oct 24 22:52:37 2011] Updating aperture counts using extracted products
[Mon Oct 24 22:52:37 2011] Error reading totcts from fullrun_ccd3_acisf13452_pi14-548_pass1_cl_src2_src.pi.gz
[Mon Oct 24 22:52:38 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 22:52:38 2011] Using photon index=1.80, rate=0.00819, arf fullrun_ccd3_acisf13452_pi14-548_pass1_cl_src2.arf
[Mon Oct 24 22:52:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 22:52:38 2011] Updating source flux to 1.2e-13
[Mon Oct 24 22:53:30 2011] Reading fit data from acisf13452/analysis//spectral/fullrun_ccd3_acisf13452_pi14-548_pass1_cl_src2_pl.csv
[Mon Oct 24 22:53:30 2011] Spectral fit parameter nH value = 2.519e+13
[Mon Oct 24 22:53:30 2011] Spectral fit parameter PhoIndex value = 2.09844
[Mon Oct 24 22:53:30 2011] Failed to get F(0.3-8.0) from acisf13452/analysis//spectral/fullrun_ccd3_acisf13452_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Oct 24 22:53:30 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 22:53:30 2011] Using Nh = 2.5e+13, photon index=2.10, rate=0.00819, arf fullrun_ccd3_acisf13452_pi14-548_pass1_cl_src2.arf
[Mon Oct 24 22:53:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 22:53:30 2011] Updating source flux to 1.3e-13