[Mon Oct 24 17:12:41 2011] Detection parameters:
  Position = (599.3, 1196.0) = 1 1 23.23 -22 7 37.0
  Extent = 0.5" x 0.5", rotation angle = 14 degrees
  Source counts = 11.2 +/- 3.6
  Background counts = 1.8
  Rate = 8e-05 +/- 3e-05

[Mon Oct 24 17:12:41 2011] Off-axis axis estimate = 2.86'
[Mon Oct 24 17:40:49 2011] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 17:40:49 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Mon Oct 24 17:40:49 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.138
[Mon Oct 24 17:40:49 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 0.55"
[Mon Oct 24 18:18:47 2011] fullrun_ccd1_acisf13452_pi14-548_cl_pass0_src27.ximg exists
[Mon Oct 24 18:18:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13452_pi14-548_cl_pass0_src27.csv
[Mon Oct 24 18:18:47 2011] fullrun_ccd1_acisf13452_pi14-548_cl_pass0_src27_1.ximg exists
[Mon Oct 24 18:18:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13452_pi14-548_cl_pass0_src27.csv
[Mon Oct 24 18:18:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13452_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13452_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 18:18:47 2011] fullrun_ccd1_acisf13452_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Mon Oct 24 18:18:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13452_pi14-548_cl_pass0_tfrozen_src27.csv
[Mon Oct 24 18:18:47 2011] fullrun_ccd1_acisf13452_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Mon Oct 24 18:18:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13452_pi14-548_cl_pass0_tfrozen_src27.csv
[Mon Oct 24 18:18:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13452_pi14-548_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13452_pi14-548_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 19:38:27 2011] Spatial fit model total counts = 12.452300, observed total counts = 18.000000
[Mon Oct 24 19:38:27 2011] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Oct 24 19:38:27 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 19:38:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 19:38:27 2011] Assessing source extent using major
[Mon Oct 24 19:38:27 2011] Source does appear to be extended
[Mon Oct 24 19:38:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 19:59:52 2011] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 19:59:52 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Mon Oct 24 19:59:52 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.138
[Mon Oct 24 19:59:52 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 0.55"
[Mon Oct 24 20:34:18 2011] fullrun_ccd1_acisf13452_pi14-548_cl_pass1_src26.ximg exists
[Mon Oct 24 20:34:18 2011] fullrun_ccd1_acisf13452_pi14-548_cl_pass1_src26_1.ximg exists
[Mon Oct 24 20:34:18 2011] Fit fullrun_ccd1_acisf13452_pi14-548_cl_pass1_src26 appears to have run properly
[Mon Oct 24 20:34:18 2011] fullrun_ccd1_acisf13452_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Mon Oct 24 20:34:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13452_pi14-548_cl_pass1_tfrozen_src26.csv
[Mon Oct 24 20:34:18 2011] fullrun_ccd1_acisf13452_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Mon Oct 24 20:34:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13452_pi14-548_cl_pass1_tfrozen_src26.csv
[Mon Oct 24 20:34:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13452_pi14-548_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13452_pi14-548_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 21:48:08 2011] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 120.047670 pixels away
[Mon Oct 24 21:48:08 2011] Spatial fit model total counts = 17.903700, observed total counts = 18.000000
[Mon Oct 24 21:48:08 2011] Offset between fit and detection position for source 18 = 0.479459 pixels
[Mon Oct 24 21:48:08 2011] 17.941730 total counts/ 6.403530 bgd. counts: snr = 4.559617
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.479459 pixels
  Position = (599.5, 1196.5) = 1 1 23.24 -22 7 37.0
  Extent = 0.5" x 0.3", rotation angle = 330
  Source counts = 11.5 +/- 4.2
  Background counts = 6.4
  Rate = 8e-05 +/- 3e-05
[Mon Oct 24 21:48:08 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 21:48:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 21:48:08 2011] Assessing source extent using major
[Mon Oct 24 21:48:08 2011] Source does appear to be extended
[Mon Oct 24 21:48:08 2011] Computing asymmetry using major and minor axis, asym = 1.42
[Mon Oct 24 22:01:34 2011] Writing source region out to fullrun_ccd1_acisf13452_pi14-548_pass1_cl_src18_src.reg
[Mon Oct 24 22:01:34 2011] Extracting stamp from image fullrun_ccd1_acisf13452_pi14-548_cl_sm2.00.img.gz, (578, 1175) - (621, 1218)
[Mon Oct 24 22:01:34 2011] Writing fullrun_ccd1_acisf13452_pi14-548_pass1_cl_src18.gif
[Mon Oct 24 22:15:02 2011] Size of ../../acisf13452/products/events/fullrun_ccd1_acisf13452_pi14-548_pass1_cl_src18_src.evt.gz[events] = 12 counts
[Mon Oct 24 22:15:02 2011] Mean chipx,y = (255.17, 916.50)
[Mon Oct 24 22:15:02 2011] Mean tdetx,y = (4215.50, 4362.17)
[Mon Oct 24 22:15:02 2011] chipx,y range = (233.00-269.00, 904.00-944.00)
[Mon Oct 24 22:15:02 2011] Size of ../../acisf13452/products/events/fullrun_ccd1_acisf13452_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 23 counts
[Mon Oct 24 22:15:03 2011] Not generating rmf since there are only 11 counts
[Mon Oct 24 22:15:03 2011] arf not found, will run specextract
[Mon Oct 24 22:15:36 2011] ../../acisf13452/products/spectra/fullrun_ccd1_acisf13452_pi14-548_pass1_cl_src18.warf not found
[Mon Oct 24 22:15:36 2011] ../../acisf13452/products/spectra/fullrun_ccd1_acisf13452_pi14-548_pass1_cl_src18.wrmf not found
[Mon Oct 24 22:15:36 2011] Removal of ../../acisf13452/products/spectra/fullrun_ccd1_acisf13452_pi14-548_pass1_cl_src18.soff failed
[Mon Oct 24 22:15:45 2011] Spectrum 18 has only 12 counts, deleting rmf
[Mon Oct 24 22:15:45 2011] 191.398
[Mon Oct 24 22:52:36 2011] Updating aperture counts using extracted products
[Mon Oct 24 22:52:37 2011] Error reading totcts from fullrun_ccd1_acisf13452_pi14-548_pass1_cl_src18_src.pi.gz
[Mon Oct 24 22:52:37 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 22:52:37 2011] Using photon index=1.80, rate=8.12e-05, arf fullrun_ccd1_acisf13452_pi14-548_pass1_cl_src18.arf
[Mon Oct 24 22:52:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 22:52:37 2011] Updating source flux to 1e-15
[Mon Oct 24 22:52:48 2011] Flag p found in src. 18 procflags, skipping spectral fitting
[Mon Oct 24 22:52:48 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting